I assume this is what the video is about, If so that's very old news.
Hydrocars
274 posts · 151 more in threads this archive does not carry · writing between Jul 2009 and Sep 2024
An identity on IonizationX as it was harvested, not an account on this site. Nobody here has claimed it, and nothing connects it to a person by name.
The Meyer Demo cell would run any car, If mixed with gasoline fumes. I was running my dune buggy on Gasoline fumes and My plate cell. I wasn't interested in the Mix So I never really spoke much on it., However I have posted this info here over a year ago.
I assume this is what the video is about, If so that's very old news.
I assume this is what the video is about, If so that's very old news.
Like I was saying..
Get me a 3 phase motor, So I can turn it into a generator.
A 5k watt inverter, So I can Power the 3 phase generator/motor to generate a 3rd leg, "3 phase."
A starter motor to start the 3 phase gen, Or a Rope, either one of those I hear works. But I recommend a Dc starter motor.
A 200 amp alternator to replace the factory alternator.
A bit of petrol to get the system started.
And a series plate cell with about 200 plates, That can handle the 230 3 phase at very low current draw. And some hoses So I can connect the gas from the cell to the intake..
Send me this stuff, and money to hire someone to do it, Since I don't have the time..
All parts should be under 2k, Not including the test car. Perhaps someone could Donate a Beatle since I had to sell my in order to get my HVAC license..
Then,, I show a Bug running on water.. And the best part is it wouldn't cost 50k.. Weeeeeeeeeee..
BTW, has anyone here managed to generate 3 phase yet from single phase, Using only a small 3 phase motor?
Get me a 3 phase motor, So I can turn it into a generator.
A 5k watt inverter, So I can Power the 3 phase generator/motor to generate a 3rd leg, "3 phase."
A starter motor to start the 3 phase gen, Or a Rope, either one of those I hear works. But I recommend a Dc starter motor.
A 200 amp alternator to replace the factory alternator.
A bit of petrol to get the system started.
And a series plate cell with about 200 plates, That can handle the 230 3 phase at very low current draw. And some hoses So I can connect the gas from the cell to the intake..
Send me this stuff, and money to hire someone to do it, Since I don't have the time..
All parts should be under 2k, Not including the test car. Perhaps someone could Donate a Beatle since I had to sell my in order to get my HVAC license..
Then,, I show a Bug running on water.. And the best part is it wouldn't cost 50k.. Weeeeeeeeeee..
BTW, has anyone here managed to generate 3 phase yet from single phase, Using only a small 3 phase motor?
SS VS ?
#12 ·
Stans Brother also said that stans tubes wouldn't last forever, That they wouldn't pass electrons but for so long..
Anyone recall hearing that...
Anyone recall hearing that...
Phycology? The study of algae? I don't get it.
http://en.wikipedia.org/wiki/Phycology
Andy
lmfao, haha. http://en.wikipedia.org/wiki/Psychology would be the correct term. lol. Psychology is what I meant to type.
yes, and he specifically said he was using the alternator to restrict the amps, that's a 60+ amp alternator, do you think he has normal windings in it?
Psychology
didn't he have a video showing the buggy running on that 9 tube cell ?
Psychology
Stan was not a fraud, He was just covering up what he was really doing. Allthough he has "2" different claims.
1. Running the buggy on water
2. Spitting water using voltage potential.
Fact, He may have Not used voltage potential to run the buggy. He may HAVE split water with voltage potential tampering with the molecule on the atomic level.
Running the buggy, and using voltage potential is 2 different Claims.
"YOU DRAWN YOUR ON CONCLUSION" In your Own Head. This is called
Psychology
Psychology
Psychology
Psychology
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
1. Running the buggy on water
2. Spitting water using voltage potential.
Fact, He may have Not used voltage potential to run the buggy. He may HAVE split water with voltage potential tampering with the molecule on the atomic level.
Running the buggy, and using voltage potential is 2 different Claims.
"YOU DRAWN YOUR ON CONCLUSION" In your Own Head. This is called
Psychology
Psychology
Psychology
Psychology
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php?action=dlattach;topic=978.0;attach=5653
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
http://www.ionizationx.com/index.php/topic,1343.0.html
$ 1 5.0E-6 2.922428378123494 57 5.0 50
T 224 224 288 224 0 1.0 20.0 85.16743026114969 -4.253913238796301
R 224 224 128 224 1 5 1000.0 12.5 2.5 0.0 0.5
g 224 256 224 288 0
d 288 224 320 224 1 2.0
w 320 224 368 224 0
l 288 256 368 256 0 1.0E-6 -19152.689663265097
w 368 224 400 224 0
w 400 224 432 224 0
w 368 256 400 256 0
w 400 256 432 256 0
c 400 224 400 256 0 0.0010 172.38628755085708
r 432 256 432 224 0 78.8
w 432 256 480 256 0
w 432 224 480 224 0
i 480 256 480 224 0 0.0050
g 288 256 288 288 0
A 400 224 400 144 0 0 40.0 5.0 0.0 0.0 0.5
o 10 32 0 43 1197.2621413014756 24519.928653854222 0 -1
T 224 224 288 224 0 1.0 20.0 85.16743026114969 -4.253913238796301
R 224 224 128 224 1 5 1000.0 12.5 2.5 0.0 0.5
g 224 256 224 288 0
d 288 224 320 224 1 2.0
w 320 224 368 224 0
l 288 256 368 256 0 1.0E-6 -19152.689663265097
w 368 224 400 224 0
w 400 224 432 224 0
w 368 256 400 256 0
w 400 256 432 256 0
c 400 224 400 256 0 0.0010 172.38628755085708
r 432 256 432 224 0 78.8
w 432 256 480 256 0
w 432 224 480 224 0
i 480 256 480 224 0 0.0050
g 288 256 288 288 0
A 400 224 400 144 0 0 40.0 5.0 0.0 0.0 0.5
o 10 32 0 43 1197.2621413014756 24519.928653854222 0 -1
While on the other hand numerous experiments from people on this and other forums suggest the opposite.
A. Fluorescent lights bulbs need from 750 volts to over 10,000 volts. They step up the voltage from 120 volts to over 750 volts. Some fluorescent fixtures won't reliably start without a ground. But for purposes of a test, it's usually good enough to grab the metal shell with your hands to provide enough grounding.
Taken From; http://www.doityourself.com/stry/fluorescentqna1
-------------------------------------------------------------------------------------------------------------------------------
Lamp In parallel with (Tap Water) Clearly demonstrates (Voltage Performing work.)
-------------------------------------------------------------------------------------------------------------------------------
How many (People) have you seen provide such voltages across tap water, And yet, Did they try to (Tamper) or (Alter) the applied voltage.
How many People can manage a (Voltage ("Only") Potential) Without current flow threw tap water? Show me the forum or site links where this is being done!
Show me where they're trying to figure out why the (Voltage Potential) - (Voltage Fields) isn't working! There is a place on the internet where people have such voltages across their cells correct? I mean to light a very high voltage fluresent ("lamp connected in parallel") with (NINE) Tubes ("Also in parallel") with ordanary tap water.
This is why I sent dynoden the tools, So he could see that it worked and reply back so people like you would realize that the trick to gaining such voltage potential across (Tap water) is in the (Core.)
When it is realized that the (water molecule) is being charged to (Infinity if the electronics would allow it) But to over 10k 4 sure, you quickly realize something is missing, You quickly realize opposites attract and alike repel. It becomes All to clear what you've done to the water molecule, And it becomes clear how to solve the (Potential) problem, Meaning you just realized that the higher the (Potential) the water took on, the greater you made that bond. Clearly voltage performed work and made the molecules bond greater, Clearly now it has to be pulled apart.
Clearly, Very clearly,, opposites attract and alike repel, Clearly,
Very, ;
Very,,,, ;
Clearly.....
Electrons are being plucked off during this process.
Clearly,,, Very clearly,,,, The microwave oven is NO JOKE so then
Clearly,, Very Clearly,,,, The Meyers Vic is also No Joke!
In a kind way, where is such people applying such voltages across this molecule? Why are you guy's with the PWM and fuel cells not ((((((Looking for this choke core))))))
again,, 1 more time
(You try it.)
((((((((((((((((((((((((You Try it))))))))))))))))))))))))))
Anyways,, Just making a point, Not directed Toward you at all haithar,,, Its just that everyone spends all this time trying to learn how to apply voltage potential across ordnary tap water,,, But yet when you give them instructions on how to do so, ("You're Ignored!") And at that, you supply (Proof) and the people seem to think its easy. (The should try and see,) then maybe they'd realize exactly what (They're missing out on!)
I would also like to add;;;;
I own 2 companys, I am really really busy starting my second (HVAC) company. I also spend allot of time with my family. By no way (Do I even care one (1) - (Smit) about any amount of (Fame.) As far as I'm concerned, I do not have the time for this testing and reasearch anymore, (I am trying to get my last words in, Get someones attention) because after too long, (I want even have time to visit the forum like i am visitying it (Today).)
The thing that worrys me, when the (directions) is right in front of your face, (Nobody follows them.)
Why does everyone overlook the fact that voltage potential has been applied across tap water? Why doesn't someone Better it (and share?) Youd think there would be (People) jumping all over this, Yet,,,
Nobody wants the damn voltage across their water, (The want current flow) or else (they would be looking for this core like I recommended them to.)
Again
This forum is stalled at just under 300 members, Public forum is recommended.
I think you should let the newbies in freely, and let the memberlist grow, Then again its you thats dealing with the Spam. I don't see such big problems on other open forums. Just my suggestion.
I think you should let the newbies in freely, and let the memberlist grow, Then again its you thats dealing with the Spam. I don't see such big problems on other open forums. Just my suggestion.
I'm dropping in to make this post, "No I don't have time to work on this stuff," But,,, What I know I want to share with ;
1. Someone Producing hydroxy, that may be currently playing with their flames.
Lets start with a few facts. As you all know I have my ("Masters") in refrigeration, Which is another reason I don't have the time for wfc's right now.
Some Facts.
1. When a Gas ("Drops") In Temperature there is a gas to liquid conversion -"Condensation."
2. When a liquid ("Drops") In Pressure there is a Liquid to gas conversion.
Main Fact.
3. When a Gas is "Compressed" - "Compressor"- It becomes ((("Saturated"))) - The Saturation Point. In this Point there exist hot vapour, As the Vapor Cools "Condensor", A drop of 1 Degree there is "Condensation." - Liiquid.
Condensation Exist closer to the outlet of the Condenser rather than its inlet.
A Fuel Cell under 13.75 Pounds Of "Pressure" Metered/compressor Threw a Pinhole valve, "Ballvalve" at the Cells Output attatched to the container compresses the "Saturated" Gas threw the Valve. The Gas Becomes even More heated where it travels threw a line away from the wfc and there exist a drop in temperature and Pressure. There exist an Ionizer to the Nozzel outlet which further ionizes the gas.
As the Hydroxy Exits the exit "Port" There exist yet another Drop in pressure and temperature, There exist Liquid Hydrogen, A Flame Thrower. I was able to experience this, Perhaps if you happen to be working on something you can one day too. Just remember.
1. Temperature - cell must be hot, I don't Recall the degree
2. Pressure - Must be atleast 13 psi, or more.
3. Metering Device at outlet of wfc container
4. Condensate line after metering device, where drop in pressure from 13 psi exist, 4' will do, 1/8" ID.
5. Metering Output line for exit port into the lower pressure earth, Must be metal for ionization.
6. One wire Ionizer at conducting outlet.
Hydroxy is a very conductive gas, Be careful. There may appear to be confusing understandings to the one reading this post, Thats what the ionizer does.
1. Someone Producing hydroxy, that may be currently playing with their flames.
Lets start with a few facts. As you all know I have my ("Masters") in refrigeration, Which is another reason I don't have the time for wfc's right now.
Some Facts.
1. When a Gas ("Drops") In Temperature there is a gas to liquid conversion -"Condensation."
2. When a liquid ("Drops") In Pressure there is a Liquid to gas conversion.
Main Fact.
3. When a Gas is "Compressed" - "Compressor"- It becomes ((("Saturated"))) - The Saturation Point. In this Point there exist hot vapour, As the Vapor Cools "Condensor", A drop of 1 Degree there is "Condensation." - Liiquid.
Condensation Exist closer to the outlet of the Condenser rather than its inlet.
A Fuel Cell under 13.75 Pounds Of "Pressure" Metered/compressor Threw a Pinhole valve, "Ballvalve" at the Cells Output attatched to the container compresses the "Saturated" Gas threw the Valve. The Gas Becomes even More heated where it travels threw a line away from the wfc and there exist a drop in temperature and Pressure. There exist an Ionizer to the Nozzel outlet which further ionizes the gas.
As the Hydroxy Exits the exit "Port" There exist yet another Drop in pressure and temperature, There exist Liquid Hydrogen, A Flame Thrower. I was able to experience this, Perhaps if you happen to be working on something you can one day too. Just remember.
1. Temperature - cell must be hot, I don't Recall the degree
2. Pressure - Must be atleast 13 psi, or more.
3. Metering Device at outlet of wfc container
4. Condensate line after metering device, where drop in pressure from 13 psi exist, 4' will do, 1/8" ID.
5. Metering Output line for exit port into the lower pressure earth, Must be metal for ionization.
6. One wire Ionizer at conducting outlet.
Hydroxy is a very conductive gas, Be careful. There may appear to be confusing understandings to the one reading this post, Thats what the ionizer does.
I believe the air ionizer does the same thing as the water gas process.
Water Gas is when you pass steam over hot red coal, Something ionizes "I Forget" and a synthetic Gas is made.
http://www.rexresearch.com/meyerhy/4389981.htm, But stan describes a ("Synthetic") Gas being applied to his intake,, Which is what you get http://en.wikipedia.org/wiki/Water_gas
There results a new synthetic gas. The synthetic gas formation stage also volume meters and determines the proper gas-mixing ratio for establishing the desired burn-rate of hydrogen gas. The rotational mechanical gas displacement system in that process determines the volume-amount of synthetic gas to be produced.
Water Gas is when you pass steam over hot red coal, Something ionizes "I Forget" and a synthetic Gas is made.
http://www.rexresearch.com/meyerhy/4389981.htm, But stan describes a ("Synthetic") Gas being applied to his intake,, Which is what you get http://en.wikipedia.org/wiki/Water_gas
There results a new synthetic gas. The synthetic gas formation stage also volume meters and determines the proper gas-mixing ratio for establishing the desired burn-rate of hydrogen gas. The rotational mechanical gas displacement system in that process determines the volume-amount of synthetic gas to be produced.
The Videos I posted is still on YOUTUBE.
The Kvolts read across the tubes apprears to be Garbled, But its there. I suggest Tinkering with an HV diode mounted in parallel with the cell, So that the correct voltage can Clearly be read across the cell.
This would mean the cell would not be subjected to a double pulse, But Hv applied across. Whoevers following this, I do not have the time to play with any of this. I cant even so much as look at an single tube cell. Take the videos, imagine a diode in parallel with the cell,, See what comes to you.
Good luck, You can manage something, Whoever you are.
The Kvolts read across the tubes apprears to be Garbled, But its there. I suggest Tinkering with an HV diode mounted in parallel with the cell, So that the correct voltage can Clearly be read across the cell.
This would mean the cell would not be subjected to a double pulse, But Hv applied across. Whoevers following this, I do not have the time to play with any of this. I cant even so much as look at an single tube cell. Take the videos, imagine a diode in parallel with the cell,, See what comes to you.
Good luck, You can manage something, Whoever you are.
I Think there should be a diode in parallel with the fuel cell... 

Special Thanks
#6 ·
Congrats Hydro!
Glad to hear you passed!
Now, I hope to see you playing around with the VIC and/or alternator again
The Hvac Heating and Cooling Masters Exam sebo.
Again, Thanks everyone,, I feel as if it made a difference!
I'm still getting things in order, it'll still be around july before i can get the ball started for rolling.
And on the better part, When I was showing high voltage across the vic,,, It hit me,,, Put another high voltage diode in there, enough to block 30 or 40kv,, I have yet to try it to see the result,, However I do not think anyone has yet to find the right core. I will try it in time.
My mind is like a train, when it starts to slow down I may start testing a little here and there, Not sure when that'll be.
@ stevie,, i've been dragging chains and building recks, inbetween dealing with HVAC, hardly time to even get on the internet. I moved to another room and for like 4 days i didn't touch the computer. Keeping in touch is my goal, I'll try not disappear as I have lots to run.
Ahh, No problem. Just a general discussion here... I think the thread already served its purpose so Please continue.
Unfortunately I do not have anyone to spy on.
If you can understand, its one of those Toys I had when I was a kid, "Now" I know it was a toy "Parabolic" so I think. Its a good shot it wasn't a toy, I think it was acutally my neighbors, and as I am starting to remember now I was allowed to play with it.
It's just one of those Things as a child "You keep remembering" as if something is sucking you to it. I was "Certain" i would never find such a related device to what i had that day, Yet, you point me straight to them. AMAZING! My question has been answered just like that! WOW I'm so great full. Finding this toy is about the same as meeting stan meyer in person for me. Honestly, its been on my mind for litterly "Years."
Now that you've found it for me,,, I learned that it can hear things Below normal freq, Like "Ghost." And, I also learn how the dish effects the sound waves. "Something wanted me to become attracted to this device, So I am." Where it will take me I do not know, I can only thank you for finding this for me.
You guy's do not have anything on your mind thats been puzzling you since your childhood days? A, what was that or similar situation?
"I want talk about the siren hat with lights etc,,, on it." But that was also right in there with the Parabolic Mic. "Lets Listen TO ghost" lol, They say what you hear threw these devices, "It can not be recorded."
If you can understand, its one of those Toys I had when I was a kid, "Now" I know it was a toy "Parabolic" so I think. Its a good shot it wasn't a toy, I think it was acutally my neighbors, and as I am starting to remember now I was allowed to play with it.
It's just one of those Things as a child "You keep remembering" as if something is sucking you to it. I was "Certain" i would never find such a related device to what i had that day, Yet, you point me straight to them. AMAZING! My question has been answered just like that! WOW I'm so great full. Finding this toy is about the same as meeting stan meyer in person for me. Honestly, its been on my mind for litterly "Years."
Now that you've found it for me,,, I learned that it can hear things Below normal freq, Like "Ghost." And, I also learn how the dish effects the sound waves. "Something wanted me to become attracted to this device, So I am." Where it will take me I do not know, I can only thank you for finding this for me.
You guy's do not have anything on your mind thats been puzzling you since your childhood days? A, what was that or similar situation?
"I want talk about the siren hat with lights etc,,, on it." But that was also right in there with the Parabolic Mic. "Lets Listen TO ghost" lol, They say what you hear threw these devices, "It can not be recorded."
Hey, when i was young,, do not remember my age,,, I had a neat MicroPhone System for a "Kid", Designed for a "Kid."
It was a "Gun" with about an 8" diameter "Dish" on it. You pointed the gun and pressed the trigger, thats all i remember.
It The dish had a microphone inside it. The last time i remember playing with it is when the neighbor ask me to turn it off because she was on the phone, and i was overhearing her conversation. I do not remember if wireless was at use back then, But i'm thinking she was on a cordless phone.
As I aged, I've always looked for this microphone, Expecially around cristmas. I have never seen such a toy that was so powerfull, I think they got taken off the market.
I wonder what else that thing could pick up.
Do any of you have a clue to the toy i am speaking of? Please post your related toys. If you have any information on where i can see such a toy that so overpowered id like to see it. Seems like the unit was orange, cant remember all the details as i was so young. It was clearly an amazing toy. I think it picked up to much, way to much.
It was a "Gun" with about an 8" diameter "Dish" on it. You pointed the gun and pressed the trigger, thats all i remember.
It The dish had a microphone inside it. The last time i remember playing with it is when the neighbor ask me to turn it off because she was on the phone, and i was overhearing her conversation. I do not remember if wireless was at use back then, But i'm thinking she was on a cordless phone.
As I aged, I've always looked for this microphone, Expecially around cristmas. I have never seen such a toy that was so powerfull, I think they got taken off the market.
I wonder what else that thing could pick up.
Do any of you have a clue to the toy i am speaking of? Please post your related toys. If you have any information on where i can see such a toy that so overpowered id like to see it. Seems like the unit was orange, cant remember all the details as i was so young. It was clearly an amazing toy. I think it picked up to much, way to much.
SS VS ?
#1 ·
Copper with Nickel is an Alloy, it does not Corrode. It is used For Condensers which works best when submerged 6 foot into the lake, or pond. Research this alloy, try and find a tube or something and compare it to ss, Can also check a Local heating and cooling repair shop for a Sample, Tell them its an condenser/evaporator normally submurged 6 foot under, salvage a piece.
