Hydrocars

No, those photo's arent even close to the moter I seen on stans bug. The Motor was big keep looking. I couldn't find it.

No the videos are not faked, but your not seeing everything. Stan had stuff he would not allow anyone to video or photo. Also, there are all sorts of people in the videos, (Not all of them are dead.) Nobody has questioned them which I find odd. I'm not there so I cant, But I'm sure someone isn't sharing everything.

Stan also had what you called a water splitter just before the plug, Nobody has questioned that either. It is shown in 1 video online today.

The problem with not using additives, It does not bring the needed even burn rate. No additives brings a burn rate that is faster and cleaner and more volatile. Hydroxide solutions slow the rate and add too causing engines to run. A engine may run on 10 liters of hho that derived from an additive environment but 10 liters of hho from a clean environment will not match up or run the engine as the burn rate proves to fast and clean. Additives is a quick FIX for someone that does not know how to alter the burn rate of the pure clean gas. I'm sure the altered gas would be much better than using additives because you would have control over how you would want to make that mix, and I'm sure they mix would go beyound Koh etc,,.  HHO as it sits as we make it clean, it is too clean and it is too volatile. it is too pressed together and it is NOT a synthetic gas as stan was using as pointed out in the patent in my pdf! CA---

Have you read that link I posted? I hope so. If you havent then dont bother with the next one.

Maybe this will provide you some more hope and motivate everyone? IT is not the tech it is dead, it is the people that has the knowledge, They're tired of being mistreated thats why you dont see any action.

This should entertain you for sometime atleast until you learn what to mix with what And you can remember, A 2 stroke uses 3 times the gasoline a 4 stroke does because it Hits on every stroke not every 4 strokes. (They Eat Gas.) Thats why when you reRing a 2 stroke you must replace the Pistons, the groves will be worn out unlike on a 4 stroke. http://www.tngun.com/diy-steam-engine-boiler/

The water powered car is right around the corner, It will run people just isn't using their heads yet. Well, a few has but they aint talkin. The hydrogen powered car may be partially a steam car...

  ady15 you could read this if you like, I've read every stan patent and in 1 it talks about 10cc/sec. I've spent months looking threw all the patents trying to find it, "Its not there anymore." Also, there is a photo of stans buggy carrying an electric motor 18 inches in Diameter laying Horizontal just behind both seats between the seats. The photo was at the end of a video and was seen 4 or so years ago. (Thats Gone to.) I've brought attention to this Photo before and nobody can find it. I dont think anyone wants too.

http://www.scribd.com/doc/26376915/Juan-Carlos-Aguero-Dwvapour-EU-0405919A1-H2O

What words could you use to describe this video to yourself? And who would those words apply to? Just saying. Posted for fun.

I had to make a Yahoo Account. Then this ---

You are three quick steps away from joining VortexHeatExchanger.

All membership requests for VortexHeatExchanger need to be approved by the moderator. You will receive a confirmation email when your membership has been approved.

Note: You are currently signed-in as hydrocarsx. If you are not hydrocarsx, Sign-in as a different user.

solid weld adys15

If you have to have a ink pen and calculator in your pocket to get it to work then its worthless to everyone, no offense but nobody on this damn earth has that sorta time to get it to run, we have lifes. IT DONT WORK

Yes My bottle got so cold it sweated. I tried heating it with a heat gun and passing Exhaust heat on it. Did not help. Shaking the container helped the most. I tried recirculating the Exhaust fumes and it made it worse. The setup is *  and does not work. Its pure crap! I even used pure gas and what I notices is the gas would change in color and become usless and Not consumed as if the fumes got pulled out and then whats left is useless. I mixed with several things and it did not do well but did start good then get worser over time. It seems that this is worser than the carburetor that was on it.

The setup did not provide enough power to hit the required RPM for the generator, the RPMS suffer. I think the Geet is a gag

Hey steve I built a geet fuel processor and Tested it for 3 days, I've went over everything and all is good. I cant seem to get it to run long, I think the setup is complete bullshit! I've even tried pure gas, the Gas changes colors and becomes unusable wich I find sad.

I've tried everything from heating the fuel etc,, The long it runs the less Ambient air required, eventually no ambient air is needed and then the engine slows then dies. I've tried everything and each time The same thing. I do not think the Geet is legit, I think its crap.

Based on my test, I think there's a bunch of BS  on the web!!!

Any comments?

lol

Thank you Hms. We wouldn't want our water to freeze.

what is the point to this resonator? what use is it on the car really?

Oxidization is caused By lose of electrons, ?

I've been watching the forum and I see its direction, As well as progress.

Its time to view things from other angles as I just presented above. If you have a few bucks and Nothing to do then I would recommend, http://www.amazon.com/Atoms-Molecules-Quanta-2-Volumes/dp/B002K7PK3S

Grab it before someone else does...

You have no ideal how water can be used in many applications of thermonuclear weapons, The Production of certain things, Not named here is closely monitored. All of you are so closed minded it is unreal, it is Impossible to guide any of you in any direction due to your closed minds of what some guy did. Once you see what you are putting your foot into, It might be best for you to just walk away. Everything you wonder about, if its been done, You wonder who knows the secret. Well, They will not tell you the keys for several Great reasons, All I can say Is I can't blame them.

This technology is Not what you think it is, And with a Closed Mind, And unwilling to dedicate the time to what i'm pointing out you will get nowhere fast. Deuterium is not far from you, And Urey isn't telling everything, You have been ask time after time to learn the isotopes still your ignorance choose to ignor, All of you. With these attitudes you want figure anything out unless you're really set on it, I mean dedicate your life to it. You have No ideal the trouble it can bring when you take it too the levels it needs to be at, There is Very little information on the internet and when you start to see things like Uranium then you start asking yourself if its what you really want to be working around. Do you have any Clue how much hydrogen you can pack in a rain drop? Urey got many liters in just a Cc.


I have tipped many of you off way too much time after time with no appreaciation, This is the end of the line. Keep Tuning your coils, And ignore stans synthetic gas, Fractional distillation and the 5 steps of D2o (Heavy Hydrogen.) If someone has to tell you how to do something, You may be too dumb to be around it, Best to just keep shut about it as we wouldn't want this information to end up in the wrong hands. I think I said enough to the willing as to the ones stuck in toyland, Well most of what I typed just whent way over their heads which is a good thing b/c they don't need to be barking around those tree's anyways..

And Up a Level you go, Look out for that Sticky water...

Outta here/ Done with having my information unappreciated, Sharing just sucks,, More like pulling a load.   

 

I couldn't help from posting..

If you view the last above link, When you Strip electrons from the Cathode, And Apply them at the Anode, How is it they do not seem to be where you put them when you go to Certify the attempted process just applied?? Why does it seem as if the electrons Just got away?

I'm referring to charging a fuel cell.


The electrons Striped from the cathode and applied at the anode, as you imagine it,,, They get gone, electrons are lost and oxidation occurs because of electron loss..

1. What is Causing this?
2. How can you prevent it?

Here is a Better Link. http://www.mpoweruk.com/chemistries.htm

There you can read on zinc being better than copper just to the side of the photo,, Etc,,... Allot of information will not be found on the internet. Much like the Definitions on the internet, Dads 30+ year old webster dictionary has way more in it that can be found on the net, Just as some old books have information on them that you will not find on the net.

The internet is not the thing, You have to just "Come Across" the real information that's out there. I happen to have came across the importance of the electrodes, and wanted to share it.

You would be surprised what is NOT on the internet!!!

One 304 S.S. tube Will become positive charged and the other 304 S.S. tube will Become Negative Charged. Just like he says, he did not stretch the truth on that.

You can Take A Zinc Electrode and an Carbon electrode and Place it into water. The Carbon Carrying 4 electrons in its valence shell will be positively charged as it (Takes In) the electrons in the water Paste (From the "Charged" zinc) carrying only 2 electrons in its valence shell. It is Clear why the carbon here in this case took on the Positive charge! At least it should be, If it is not clear, Stop your work and take up chemistry for a couple of months to help, (Open your mind.)

HOWEVER, Carbon Becomes the Positive electrode because of its valence shells behavior and the zincs behaviour, There Exist a Mystery alloy (Found in NiMh Rechargeables) Wiki, And once this metal Replaces the Carbon The Zinc then becomes the Positive Lead, A very Abnormal behavour and yet (All proven in tap water.)

Take A rechargeable battery apart, Disassemble its TOP with a Tube Cutter. (Remove its Positive anode Arm.) See Just how important the Laughable alloy is for allowing electrons to exit its liquid. You'll quickly see the AA battery become Useless when removing the arm witch Dips into the past. Try Bypassing it with a simple Prob needle from a Multimeter with No Effect!!!

There's a reason Your Fuel cells are oxidizing on its terminal. Can not you understand that by this the electrode potential is None equal (As It Virginly was!) De virginized electrodes with the oxidization only creats a very small electrode potential. IF Both were equal, Electrons wouldn't flow. This can be Tuned with this knowledge. However, Oxidization accures and theres electrolysis.

1 304, Placed Near 1 316L electrode is Better than --- 2 304 electrodes, or even 2 316 electrodes.


if you're wondering what zinc looks like, Check out the tubes in stans video. As you can see when thought to be Stainless steel while viewing the famous youtube video clearly it doesn't look to be ss as the tubes appear dark, or dull. Zinc carries a very similar look, there is also zinc coating, Allthough herman used Nickel.

As your quote stated, (Will Become.) Right you are! But, with a WISE selection, it (Already Is/(Fixed).) The Electrons "in any Paste/Electrolyte" are looking for somewhere to go, It is the Choice of electrode Potential that will determine their electron ejections direction and ionic cation movements!!!!!

Just a Thought I once again shared.

Electrode Potential... What is it? What could this be?




Carbon, Atomic Number 6, Has 4 electrons orbiting its valence shell.
Zinc, Atomic number 30, Has 2 electrons orbiting its Valence shell.
Nickel Atomic number 28, Has also 2 electrons orbiting its Valence shell.


Basic Battery Operations, Positive Carbon Pole with a Zinc negative Termial. Electrons Freely travel due to the Choice of Electrodes.

Within batterys the electrodes must not be the same. This way with a carbon Pole having only 4 electrons in its valence shell, and the zinc 2, the charged electrons in the past wants to travel from the carbon to the zinc (BECAUSE OF THE CHOICE OF ELECTRODES.)

Zinc, What does it look like? Take a NONE rechargeable batteries wrapper off, Scrap clean. That's what Zinc looks like! Excluding 9 volt batteries. Those of you that knew Herman Anderson. His electrod of choice was Nickel. His electrode was about 13.5 inches in diameter and Nickel Plated. The other Electrode is unknown to me.

Meyer, SS Electrode Vs SS electrode. Wast of time. (There is NO "ELECTRODE POTENTIAL" There.)

Google = (Electrode Potential) and Include in your Brain, Electrons in Valence Shells.

Potassium Hydroxide = Electrolyte..

HOWSTUFFWORKS.COM = Battery, (Have A Read On Electrodes.)

Good Day...