Hydrocars

I am glad someone is testing a transistor my only Wonder is a mosfet is voltage controlled and very sensitive to the resident of feedback of the coil and the transistor is current regulated at is Skate rather than voltage like the mosfet. Maybe this will work out better let me know.

Look closely at that fets data sheet I used, it seems to work best. And that's cool on the led part tektrical! I can't wait to see you guys better this.

I doubt that, probably 35 I didn't measure, I haven't took anybmeasurements, I was so excited about hydrogen production with 1 wire. The wattage had to be low. I don't care if it was a hundred amps of current I don't care if it was 300 I'm just impressed with someone wire production...

Radiant energy Steve. I'm working threw resonance and Tesla's building resonator is related, I'm surprised what can be done with just 1.5 volts at the moment. I'm in deep research at this time. I will share all my findings.

I can't wait to see someone confirm this above circuit.

I finally fried that mosfet last night the one in the video I believe it's a 13 45 or something another of that nature anyways I compared it to another one by installing another smaller mosfet like seen in the original videos let me tell you what those small mouth puts blow almost every time the resistor and one of the original videos was in the wrong place I was only following the meaning Tesla circuit eventually figured it out and moved it over from the gate to the source it's a 1 million Ohm resistor and that is where it belongs however sometimes I have to put my finger on the resistor to get the circuit 2 resonate. Also I was able to light a 12 volt light I'm the secondary call by connecting a lot between. Cole and the primary I'm talking about the coal in series with a fuel cell the secondary call lead what's left on connected on one end and I was arcing it on either of the other call that was in series terminals and with a right Arc a 12 volt light will light and the amp draw only went up 20 ma.


 I do believe this circuit should be used to convert energy and not for a fuel cell I think the fuel cell is connected too soon in the circuit I also think this should be a wireless system with that being said you could now draw and imaginary circuit were they fire stats in resonance in the second goes to the fuel cell I believe this will give you the full 360 Degrees rather than the 180 degrees I feel like I am getting now. Sorry sorry about the typos it is a text-to-speech cell phone error it's either that or not posted off sitting in the parking lot of a doctor's office. I have many formulas I have gathered up over a great deal of time reading and researching I will scan these formulas if anyone is interested it is the master of resonance equations that I have put together one by one and they are all correct. I'll have all sorts of equations I'm about five sheets of paper I have taped on my wall if anyone wants them feel free to ask and I will post them somewhere here I will post them anyways like her own when I get time and if anyone has any problems with a formulas I will also post a how so you use them and anyone here that stuff used on the equations will no longer be confused cuz I will break it down really simple so everyone can understand how the form was work. Also also Stanley mayor has some form of in his patent and he says the dielectric properties of water is 78 arms meaning that is the capacitance reactance is 78 ohms with that being said it would only be true if the inductance reactance was also 78 ohms. Stanley walk Stanley walked around preaching 20000 cycles per second so with this and the end credits and capacitance reactance we are now able to check they circuit to see if it reacts is 78 or Twenty Thousand cycles per second using these formulas. I will I will upload a few videos on how to use these formulas to make it even simpler so if you've never done it before I will tell you now it's nothing don't sweat it these are very simple equations that I will teach you how to do.


One last night Tesla has some missing equations and I believe we can find them. If you if you search for Tesla on Wikipedia you will see patents in those patents you will see a energy converter that is on a round ring and in another patent you will see how he supplied the voltage with a twin to horse call where it is not labeled that.  it is possible whoever stole the patents did not realize how powerful this patent was I think it is a leak. I will end this post saying Tesla's low voltage primary was very fine wire and the secondary was very coarse and it was wired on the outer side of the fine wire on a toroid. This is completely backwards from the Tesla coil. Also he does everything in sets of two's there is many different ways to hook the coils on the toroid as explained in the patent. Hey refers to this as a energy conversion machine that can be used in multiple ways and he Powers it with a twin horse coil. This is why I was saying one horse can pull 8000 lb into horse can pull 40,000 lb if you can understand that pick a pair that with these dual coils then you can make the equation they do not know enough to even attempt it at this time because all of these energy converting devices uses radio frequencies and not anything below 100 Hertz.

I'm planning on making a bigger version of this, in my video I didn't have it turned fully up because I didn't want to blow the mosfet. The rf burned is the most brutal burn I've ever felt, it leaves a black hole in your finger and theirs no avoiding it if you touch it. The leads of the fuel cell has kilo volts on either tube. It's not operating from a low voltage. My next step is to use tube now a few, and I want to try a transistor. I have no clue how to connect these tubes or even how they work. And thanks Tectrical!

I will make a second post. With a video, then I ask you to share with as many people possible.

Where did you get the patent number?

My wife is in surgery, I will look as soon as I can, it's possible I have it because I knew to download everything I could get my hands on before they all got lost. Just give me time and I will look as soon as I can.

Are any of you guys following me? Hydrogen has three isotopes you have to use a particle accelerator to create these isotopes that's what the EPG what's doing he had hydrogen gas amongst other solids and metal dust particles mixed together to create that circular device in which the gas pump was in its middle as the higher the pressure per square inch the stronger the magnetic field the hydrogen isotope could maintain and would hold this field like a capacitor are any of you following this? I do apologize for the very quick reply I have switched my speech to text to a more proper application and try to keep it updated I am very busy at this moment if anyone has any questions about anything I have said feel free to ask and I will clear up whatever I can.

The hydrogen element has three isotopes: hydrogen, deuterium, and tritium. We each have a single proton (Z = 1), but the number of their neutrons is different.

And I will add when I was playing with my fuel cell I had to exploded it inside itself luckily it did not bust this was years ago and it did seem like I had some baking soda contaminated yet but I had used a high voltage DC coil it was charging the gas that had some already burnt gas mixed in it and I had a flame but shoot out of my little torch nozzle that I had built and the flame was about 2 ft in length and what was so amazing as to me the entire length of the flame it was very narrow and there was a flame from the tip of the nozzle and they flame continued for about 2 foot it was the narrowest longest flame I had ever seen in my life and they Tails coming from the flame was the same as a temp as it was the end it was it was the strangest flame I have ever seen it was almost like a liquid gas flame it did not feather out and widen as it got further away from the tip it stayed narrow from start to end it looked like a flamethrowing machine all I was using was water possibly baking soda but the main thing was I had ionized gas but my cell blew up I don't know if there was some kind of unstable oxygen in the tank that caused it when it back flashed but I got agitated and just let the cell set there and I noticed a lot of glitter like sparkling on the cell and you can hear it popping like it was electrically charged and I mentioned this to you Stevie years ago I don't know if you remember but that is what had happened and I am just now putting all this together

Forgive me I only have a brief moment I will lightly touch bases as I do not have time but will try anyways I will try to come update later

It is known that if you have two separated containers insulated perhaps plastic containers one can be charged with a Van de Graaff static lock charge positive the other container negative the water carries opposite charges about injection into the engine through the intake valve the water becomes a fuel in this manner and ignites under compression or the spark exist.

Stanley mayor forgive me for spelling as text to speech was using a pressurized fuel cell and ionizing the gas where they have voltage DC pulse where higher the pressure in the fuel cell they more magnetic properties they gas would take on and they greater the charge the higher the pressure. His EPG r e e g I forget which one he calls it the circular worm like ordale with coals all around it was a example the reason I point that out is to ensure you and you can look at the patent dates he was using a recirculating pump as the hydroxy was ionized and left the high pressure fuel cell it was recirculated back into the fuel cell so that they high voltage ionization such as what's used on those lifter UFOs could further charge the gas which a few years ago I had made a statement my fuel cell blew up and it was sparking I could not figure out why that's what I was doing that day and also I remember a flame about 24 in in length and cannot figure out what I had done so I had made an improper conclusion that it was due to contamination but it was I am us gas that I had witnessed it just recently had figured this out.
The electron extraction used on the oxygen electron to pluck It Off is used with photo transistors that is usually used to isolate circuits they charge from the battery/ generator to the fuel cell for production of gas is Switched Off at the same time the electron extraction to consume the electron from the oxygen atom is switched on and this is repeated very rapidly and also done during the time the pressurized hydrogen has a higher voltage applied to it and becoming one of the three different types of hydrogen elements I forget the three but you could look them up some of them is already overreactive some carry extra electrons some carry neutrons something to not this is related to Stanley's hydrogen proton accelerator and this is very high tech science that has been overlooked but it is there. Hydrogen gas does become magnetic the higher the pressure the more magnetic the faster it moves the more magnetic the oxygen atom can be stripped of its electron and it can become a nuclear unstable gas ion or there is other words that has left my memory to explain the different types of combinations a single atom can become for example I will throw this out there how did you could be called a tri-top gas that is one of the three and I'm sure I got that wrong but I have not rehearsed posting this only going off the top of my head Trigon three different types of hydrogen I forget what you call a atom with an extra unknown number of added electrons or neutrons but they all become Radioactive all this technology is very real other gases was also introduced into the cell although it is not required and not important but the gas is that was introduced was gases that had already been burned and this father helps slow the burn rate of the hydrogen down but by the time it goes through the electronic extraction circuit I guess ionizing circuit for the hydrogen it's really not needed and if you look at the output comparement when that you do get something to compare to you will quickly learn that one gallon of water is equal to like 70,000 barrels of oil so it does not take very much hydroxy gas to make this work when it is understood in other words that six leaders are whatever you was producing could have ran your motor you're working on that day for probably a number of weeks just from that small amount of gas only after it has went through the gas accelerators and ionizing processes it is not so much the voltage intensify your circuit although that is very real and they water does become a capacitor but that is a cold process and the electrodes are Teflon coated and it works from a sort of van d graph type deal and there is also indeed another electronic circuit where a choke is placed in series with a fuel cell with a capacitor shunted at its beginning and that is a second part but frequency if you look at the contactor coil on a residential air conditioner system you'll see the 24 volt contactor magnetize the contact using alternating current Faraday used what was called a interrupter circuit Tesla removed the circuit and used normal 60 HZ the Tesla coil has been shadowed as Tesla is the one that actually removed the capacitor from the primary coil and added it to the secondary and realized it could be tuned only after the Irish preacher discovered the Step up Transformer as Faraday only they step over isolation Tesla took the spark gap machine and I would also like to add using a spark gout to transmit is illegal and prohibited but Tesla used the spark gap on what Faraday and the preacher was working and added a secondary circuit that appears to be stan circuit. My time is very limited here today but I will say they spark gap light bulb that admitted such a terrible sound was solved by a tank circuit filter that you need to have in your crosshairs. If and for those that do not know and I will just throw this out there the third side of a triangle is the first side squared plus the second side squared that equals the third side squared and then you take the sum you got in square of these third side and find the square root and that is your answer. Henry's Times capacitance sum squared * pi*2 then you divide all of that some by the number one and you get the frequency

Is their a reason I have no replies? I feel as if I'm being ignored on the very website that I created. If I did not have A purpose I wouldn't have bothered wasting anyone's time. I'm unsure to why I have no replies but it saddens me to see this. What is going on with you guys? If I have done something that was disrespectful to cause this please let me know, tell me directly here.