how exactly is a solar panels built anyhow? I have 5 panels, each is 37.5 volts and 8.5 amps.
If I connect 2 of the panels in parallel I get double the current production and the voltage remains the same. But, If I connect 2 of my panels in series, the current production remains the same but the voltage doubles.
If I were to calculate the 600 watts directly from the utility pole, I would say I use 30 Milliamps at 20,000 volts, then onto the 240 pole transformer that consumes 2.5 amps, but my Window unit is 120 volts so I must have 5 amps.
I thought about powering the unit with a 12v battery at one time since everyone says thats the logical way to do it, but then I decided that 50 amps from that battery at such low voltage was not as appealing as the 120v DC using a H Bridge at 5 amps. But then I realized that If I could just somehow use 240 volts at 2.5 amps I would be more than willing to donate a amp or 2 for the heat loss of stepping it back down to 120, since the unit does operate on 120 volts.
I installed a new unit the other day and the rotor locked up, the locked roter amps was 108 amps at 240 volts. I realized that a locked moter was consuming over 25,920 watts!!! But I dont think anyone hardly noticed since I was only using 1296 Milliamps from the 20kvolt power line wire!
I still dont fully understand how my solar panel is built, Is it like one very long strip that produces 37 volts? and also, how you reckon it produces a whopping 9 amps of current at that 37 volts?
Anyone gave any thoughts to those 52 batteries in the question I ask above yet? Again, Your opinions are welcome, and No answer here has to be perfect. Get the Ideal in your head so I can be cleared up on this, then I will move on to the next step.
Hi, Anyone feel free to answer your opinion or fact here. I want your Thoughts and comments Please. Please Dont be shy, Im really interested in what your point of veiw may be here. Everyone has their on thoughts so Please feel free to share yours with me.
Here is My question. By the way, I dont feel comfortable Posting in a open forum but atleast this one is registered memebers only. Also, I have noticed that IonizationX doesn't show up in google results for me the way it use to stevie. Im sorta thankful for that, but anyhow. Here it goes!
----------------------------------------------------------------------------------------------- If you have an Window AC unit and it consumes 600 watts of electrical Power P. At 120 volts V, at 5 Amps I. Just a thought. Now on to the question. ------------------------------------------------------------------------------------------------
Question. If you have say 92 1.3volt rechargeable batteries in series, and the voltage was close to 120 volts. How long do you think the batteries would remain charged if producing 600 watts? I think each battery would produce 4 milliamps, I may be wrong.
How many amps do you think each battery would use? How long do you think they would remain in good health before voltage started droping? Do you think you can divide the I Current draw as I just did say 40 Milliamps per battery? Or, does the current work some other way in this series configeration?
Sorry for the delay, and yes, Voltage intensifier circuit as stan created it. Stans famous statement, voltage would go to infinity if the electonics would allow it. So what is it?
It is a device stan created to take to the patent office to prove that the theory worked! The device Proved hydrogen could be produced in large amounts using voltage potential and little current flow. The device offered by stan called the VIC to the patent office Convinced the patent office into giving stan his patent. The device was obviously "more effiecient" than normal direct current which heated up, the device ran cold. Boldly put,
THE DEVICE WAS A SMALL SCALE MODEL that proved stans ideal was different than normal electrolysis, and the device was promising and it worked! Stan got his patent on it didn't he!
How it works.
The Vic uses 2 chokes, when a Primary Transformer IS NOT used the PWM or whatever device you choose to use will EMIT BACK EMF. To catch this EMF you would use a shunt diode. To Magnify the voltage potential you would use a secondary side of transformer, the primary and NOT A SHUNT DIODE. The secondary primary creates a larger EMF that RESONATES with the CHOKES at a " CERTAIN FREQUENCY " Hence, RESONANCE. The Primary side of the step up transformer shall NOT be shunted as it reduces the resonance , and even kills it.
PWM, This allowes resonance to occur, You can not have self resonance if you are providing the power! you start the resonance, stop, cut power, and let it resonate! Then switch the power back on to repeat, PWM. It is this Cell that takes a charge and flys to infinity.
Fact!
There has to be no load for resonance of this setup to occur, it can be seen with NO LOAD at all, and it can be recorded on a oscilloscope! This is why the water needs to be none conductive with no additives.
Water reacts to a step charge affect when a static pull charges in play. A high voltage Microwave oven diode could be used to produce direct current for the water molecule if the water was (Very Clean). IT IS NOT A AMP CONSUMING PROCESS. The device was presented, and proved to work, the patent insures this.
Now that the VIC is out of the way, Stop Screwing off and put this baby on a larger scale where it belongs, Put the VIC on the shelve after you realize how it is working, IT IS A TOY. The real deal produces much more power, and sever hundred more volts.
Back EMF is the key. Voltage is not exactly just a Baloon sticking to a wall, or a static shock. it is a tool that can be used.
Many of you have not seen the light behind the curtain because one can not see past the point made. This is as clear as I can explain it to you. You do not need a Ferrite core to hit resonance, you dont need tuned chokes, (you do need the right resonate frequecy of the circuit) and you do need to be educated on how to run a Function generator, and trust me when I say this guys, it can take a week to learn how to tune these things or longer. 555 is complete junk when searching for resonance, a 555 is for when you already know the freq and you want a machine to produce that freq.
Get a PWM Generator or get off the porch! Learn what the DC OFFSET is for, because you will need that! This keeps heat down and makes the waves flow harmlessly to the coils, learn what start stop phase is, (you can not hit resonance without that!!!!!!) I will say this a second time so you can be sure and hear me, you can not hit resonance on the VIC without the Start Stop Phase. You will find that a sine wave is just as good as a square, and a triangle is of no use at all.
Happy testing!
Oh, charge your cells with Direct DC before you begen, Dont charge it if you're looking for the large booms that shakes the table.
It's Difficult for me to be exactly true at the moments, However, There is something very different! I am not yet sure if its a reverse base breakdown.
I was getting different results with the frequency on the alternater setup back in the day and I couldnt not explain why, nor did I understand why everyone elses was different from mine. The other day I ran into something, then I realized I used Axial Diodes with my original alternator setup. Something about the diodes act differently.
I once upon a time got a coil to emf the Dc capacitor threw the diode, at a lucky time the diode would break down and the capacitor would charge the coil, then a back emf would again charge the capacitor immediatly. there was an resonance occurring that i've never seen before. I havent yet been able to replicate my own work.
I have noticed, to keep something in resonance from dying out, you give it a slight push, and it keeps going.
I would still like to have that pic, but anways, here is a tip, "for the alternator setup". and, self resonance..
Axial Leaded TVS Diodes Axial Leaded TVS Diodes Data Sheets » What is an axial leaded TVS diode,? Axial leaded TVS diodes or transient voltage, suppressor diodes are a discreet, fast switching, semiconductor devices that can respond to overvoltage, events faster than most other types of circuit protection devices. Axial leaded TVS diodes feature low clamping voltages and quick response times that are useful for protecting against very fast and damaging voltage transients, such as lightning, inductive load, switching and electrostatic discharge. TVS stands for discrete transient voltage suppression. Axial leaded TVS diodes can be used in a wide variety of applications such as protecting data and signal lines, microprocessors, MOS memory and AC power lines. Industry segments where Transient voltage suppressor diodes are typically used are in telecommunications and industrial equipment, computers, peripheral devices, and consumer electronics. Unidirectional, and Bidirectional, polarities are available for most series. Axial leaded TVS diodes are available with a power rating, ranging from 500 watts to 30,000 watts. The reverse standoff voltage,, ranges from 5 to 512 volts. Axial leaded diodes come in DO-15,, DO-41,, DO-201, and P600, package types.
Stevie, if you can search and find my old alternator setup diagram I drew in paintshop , looked like I drew it with a crayon, I will tell all of you a secret... It was also posted on waterfuelcell.org, I can not find it anywhere.
I would like to drop in here and make a quick update on stans VIC. Sorry if i'm not here all the time.
Stan told the truth when he said he pulsed his tubes at 20,000 cycles per second! I'm not exactly sure what he meant by that but due to research I can tell you that at 20Mhz and any wavform will work. You have to have an oscilloscope because you have to tune it anywhere between 13 Mhz and 20 Mhz.
You shall tune till you see whats called "Ringing" at the start of the natural sine wave. Do not tune the ringing all the way threw the entire waveform. The Ringing rides on a sine wave. Let it ring for 1/4th of the timeframe of the sine. Voltage increases production. The fuel cell remains cold. The gas is far less volitile and the cell continues to run. Doesn't matter if you use a transformer or not, A function generator and scope is the only needed tools.
Have fun, later!
BTW, there is no step charge effect, but you will see unique bubbles thats huge. The gas is less volitile!!! Almost like it lacks oxygen.
hello old friend.. im 14 court cases in.. Its been a long going process, and very disturbing doing the custody battle. After 18 years with her and having 3 children, 2 living, they ruled we was not married after plenty $$$.
I cant seem to understand why the people here in the research group hasn't discovered the true answer to water for fuel. If a water heater flys upward, is it not a rocket and was it not fuel that thrusted it? Why, why, why is it so hard to understand that if you raise the pressure you raise its boiling point, and if the water is above its ambient boiling point then, is it not common sense that releasing water at this pressure (125) and temperature (superheated) will thrust the piston downward when injected 5 degrees or even retarded, as it hits the aluminium cooler called an engine.
Still Today nobody has found the answer, Im still here, watching, listening, smiling.. Once I gain, briefly i'll repeat myself, Go disable your pop off valves and shoot from a distance. And, use caution when removing a ratiotor cap.
Water is a fuel that only exist at a certain temperature several times greater than its boiling point and at a pressure greater than that of a cylinder engine but not because of the cylinder it is a fuel because its onlyba fuel under suchbabhigh pressure. Water will not act as a fuel under a low pressure. You can super heat water on xemand like stan did but the presure must be high. The higher the pressure and the hitter the water the more power it will produce when the pressure drops. A pressure drop and temperature change will cause the fuel to convert into a type of exposion.
The power of water is deadly and brutal, the explosion is so brutal its power is ungrasp to the century. Raise your pressure on your water tanks, this will raise the waters boilong point. Raise the pressure to 125 psi. Do not under estimate this system as it will kill you. If handled incorrectly. Do not worry about hydroxy production because it is not even used. At such high pressure it is impossible for the water to reach a boiling point on earth. Feed the superheated pressurized water to a injector that can handle high heat. Inject the pressurized superheated water into a aluminum cylinder if you dare. Once the synthetic reaches its aluminum chamber it will violently explode. If there is a leak in the system run! Run fast and prey! Do not look back. Do not use plastic containers, retrofit ceramic spacers to handle high heat. Use a cell to heat the water. Use your, or your friends mechanicle mind to inject the fuel when needed. Become a team, do not try to perfect this system alone, as it has already been done. I am only a human with a spiratual direction. I was put here by my heavenly father God. Thank you Gabriel the sweet Angel. It is to my belief the Giant came from a empty place in the earth, he was told not to leave that place as he was under Gods instructions not to, but he was clever and did leave but he split hiself in half and he also stayed in the empty place. He was under instructions but became curiouse of his surroundings. He could deroot trees single handedly and he was told to stay away from the water, which he did not do. He is still at the empty place now, and he was also found dead on earth. I do not know why i post this, it is not facts, it is only my text on your computer screen. We are human now, but we are spirats later in our afterlifes and the road to heaven is narrow. Brian Coats 1/8/16
Super-heated Water at One Hundred Twenty Five Pounds Pressure (125psi) introduced into Piston Cylinder from (injector of 125psi) with Cylinder Pressure at just under and almost equal to 125psi is a pressure differential that allows the injector to move super-heated water from one location (injector) to another location (cylinder piston) at just a small pressure differential.
Super heated water now moved from injector (A) To Cylinder Location (B) where piston is located where Momentum Causes a downward force on the piston (crank shaft) and pressure Reduces in (B) where Superheated water now is not allowed to remain a liquid.
A drop in pressure from the piston moving downward just after super-heated None Processed natural water injection will cause a pressure problem on the water molecule which now allows the super heated water to violently boil into its gaseous atom struction and become separated as a steam vapor.
Water is then collected at the output and re-used back into the tank. The Fuel source is the Thermal source used to superheat the water at the or before the injection chamber (A) where aluminum is used threw-out the entire system.
Injection of super-heated water into (B) From (A) should be under pressure greater than the Maximum pressure created at engine cylinder (B) before Fuel can be transferred from (A) to (B).
The System is A Loop System, and the amount of water used is small. The longer run-time of engine, The more efficient the heating source becomes. It is important to realize the block-(B) will eventually become overheated and will need cooled.
(Never take a radiator cap off a car when the water is hot and under pressure) But if you must be stupid, cover yourself from the violence of being burned by the explosion.
My Old Neighbor would tell me storys about a man that would get his deisel hot then switch over to normal water. Said it ran fine, and also said it had to be switched back to diesel before it was shut off to restore the system.
Why would my 80 years old neighbor lie about this, he still runs his own single employed company and welds heavy machines for a living. It is possible he may have not understood what he seen. He is my elder and wouldn't lie for any reason to me.
yeah.... Id say so. I'm far from giving up... I think my woman got an inch and lifes a bitch. My family as fallen apart several times this year, My mind is focused on keeping my family together at this time.
Still Today nobody has found the answer, Im still here, watching, listening, smiling.. Once I gain, briefly i'll repeat myself, Go disable your pop off valves and shoot from a distance. And, use caution when removing a ratiotor cap. 
