Skip to content
Stan’s Legacy

(58)

Resonant voltage-wave

Also written pulse frequency · Pulse-wave · wave-form

Where it is first named

The resultant and newly formed gated Resonant Pulse-train (T1 + T2a xxx T1 + T2n) (58) voltage amplitude (Vo xxx Vn) is, now, attenuated by Sequential Voltage Amplitude Control Circuit (59) once step up Secondary Coil (53) produces a higher voltage level (xxxVL) above incoming pulse-train (210) since Secondary Coil (53) has a greater number of turns of wire.
Water Fuel Injector (Taper Resonant Cavity Chamber)

How it is written

  • (58)

Drawings 4

Where it is named · 5

Water Fuel Injector (Taper Resonant Cavity Chamber)

  1. The resultant and newly formed gated Resonant Pulse-train (T1 + T2a xxx T1 + T2n) (58) voltage amplitude (Vo xxx Vn) is, now, attenuated by Sequential Voltage Amplitude Control Circuit (59) once step up Secondary Coil (53) produces a higher voltage level (xxxVL) above incoming pulse-train (210) since Secondary Coil (53) has a greater number of turns of wire.

    Read it there →

  2. pulse frequency (58)

    This induced voltage phenomenon encourages and therefore prevents resonant pulse frequency (58) from being impaired or altered while being electrically transmitted to Resonant Cavity (180) of Figure (14) via electrical tabs (71) and (72) of Figure (14).

    Read it there →

Funneling Effect

  1. Resonant voltage-wave (58)

    Enhancement of the operational parameters of Hydrogen Fracturing Process (100) of Figure (6) is further exemplified when incoming Resonant voltage-wave (58) of Figure (18) electrically transmitted across Resonant Cavity Zone (35) during water injection cycle...

    Read it there →

  2. wave-form (58)

    This resultant "Funneling Effect" (260), now, allows voltage amplitude (Vn) wave-form (58) to travel the length of Resonant Cavity Zone (35) from Start-Point (85a) to End-Point (85n) increasing voltage intensity (xxx VL = Vn) as parallel voltage surfaces (83/84) diminishes in size relationship (85a ~ 85n), as illustrated in (210) of Figure (17).

    Read it there →

  3. Pulse-wave (58)

    Voltage amplitude level VL of Pulse-wave (58) is predetermined (20,000 V.D.C. typically) to start and cause Electrical Polarization Process (160) at a relative rapid rate of gas production at segmental point (85a) when voltage point (VL xx Va) is reached.

    Read it there →