sebosfato

Back to the VIC, in my point of view this short will create what stan called amp inhibiting coil. And thinking still further maybe they could be combined in one single core having a gap to adjust the coupling.


I was thinking and thinking and arrived on this... What if the shorted part of the coil have a resonant frequency? L/R = time constant and 1/TC = Hz


So here a reason why to use resistive wire: To raise the frequency. The greater the resistance in relation to the inductance the greater the frequency.


I'm saying this because kind of the inductor may have a specific resonant frequency. I think we need the pll to aways match the resonant frequency of the inductor so as we can modify it tuning the variable inductor to find the resonance of water. Basically the transformer will be at resonance aways having the pll. This way you are free to tune in to the proprieties of water.


Seems a complicated experiment but if you think well, being the inductors not part of the transformer you can keep aways the all system and just change the inductors materials or diameter to find the proper range. 

Hello Steve,


I haven't see it before. Seems pretty cool, however i don't really know if they are measuring the power output correctly. For example if you light the bulb at 25 short beats per second you would still have the light bright and would spend less than half the energy to light them up.


I think that related to that one thing that could work would be a spark gap with two combined transformers driving it. For example 1 at 40kv 1ma creating an arc, but on the other side of the arc you connect a 1000v transformer maybe having 40ma output, than this spark would combine the ionized  way to carry a much bigger current than would thus accelerating more electrons thru the gap. Would create a hell of heat. Not sure if useable electricity but very probable if worked out.

Another thing i would like to report is that Stan do show on the patents that the hydrogen is ionized negatively! When he show electron trapped!!! This might be the end for the oxygen electrons.


And another is that in some drawings he do show the connection to the transformer with only one wire being isolated ground and having a resistor to the earth...

I want to raise a question regarding the adjustable inductor in SM technology. 


I'm questioning my self what if the adjustable inductor must or not have a shorted circuit section. If you take a look at all Meyer's drawings of the EEC or the VIC you will clearly see that it always has a shorted section.


I thought about this today several hours and i think that this could definitely change every thing in the game.


I found little info about this, and says that whenever you have a variable inductor you should never leave open circuit turns, because dangerous voltages could be generated there and damage the insulation...


Meyer said that he wanted to restrict the current.


So what if the transformer originally had only primary and secondary windings. Than the two coils are wound in two different cores so they can be placed in different space relationship to the other as to have adjustable coupling, and having the variable inductor connected as he show with short circuited section variable.


?


I would like to try this, and will.


I have a toroidal core made of powdered iron with the same size stan said 1,5" diameter by 0,25" thickness, I don't really know if its permeability is the same so i'm trying to find the cross reference...


Anyway i will do for the sake of certainty again the transformer having 600turns secondary and 200 on the primary and the two inductors with means for adjusting the coupling and test it again....


What you think about?

to make this kind of ceramics is not a simple task is not possible to do at home if you dont have a extreme very high temperature oven .. and yet the ceramic to get out with some good characteristics it kind need to be made in bigger size than machine i imagine.... the pieces i tried to do all was to britle and broke up but i could reach something arond 3000 er

to be able to measure it i needed to use graphite on the dielectric to make its surface electrical compatible...

 

the material is a kind of barium titanate or some other high dielectric ceramics
 
i almost build it... i even managed to made the barium titanate powder but didnt finished the prototype because i came across the following

the electric field is not only determined by the set up of charges but also on the current and resistance of the medium


is true that if we apply 50 kv most of it will be on water if the dielectric is much higher.. however when the water (resistive medium) terminate the flow of the electrons the electric field will be almost zero...

so i felt it was not worth

but instead recently i started to have more interest in this but have no time or money to finish that...

i also tried the fracture cell with no success or at the time not so much effort or knowledge

i think we should try

my idea about the tayhe is that it first charges the capacitor than discharge to keep it aways having a changing electric field..

last but not least there is also that other patent that uses a kind of graphite layer over the capacitor and has some structure to let the ions discharge to prevent the screening of the charge...

I read some, but it was already few months ago and i would not be so certain of all.. but from the papers i found on GTo[s and Siths i found that the thiristor is something that is good for trigering a pulse... never a switch...

the mosfet you see in series is what allow the current to stop and allow the sith to stop the current... it won't stop the current even if you trigger it if the current don't fall below a certain level first...

the advantage of this specific part is that the structure of the gate and the current it allow to flow thru the gate is enough to block the high voltage that would kill the transistor..

thats what i remember of it... i doing lot of stuff now related to getting the money for my probe... the video of my project to get the crowd funding to help...when i will be more relax with all going i can go back there and find this papers for you... but is nothing that can't be found on internet...

sorry massive i think you dont understood well the sithyristor block the voltage but it can only do that if you first stop the current it wont triger alone...

A totall of 3 cents 

Almost enough for yr hv probe 

oh man we will get there...

i bought some tyristors few months ago to try this idea but didn't used yet because probably it would burn up without the correct protection too... so i thought whats the point..

it only block the peak that the transistor would receive,,, the idea of the sythyristor is that this voltage is blocked into its structure.. without current flow or minor theoretically..

theoretically for the field to collapse fast cols needs  a high resistance than the charge path...

thats why i have no diode shorting my primary...

my one cent is that this static induction tiristor plays the same as my pulsing circuit... allowing the pulse to collapse///
 
my question is how fast the core can really collapse its field?

I had here many tests and from many different setups

I had tap water at 220 volts dc starting at 10 amps and than when it boil (1 minute) it than goes down to 2 or 2,5 amps. Using tap water and distilled water however distilled made much more hydrogen before boil and took about 1 minute more. The two plates were 20x10 about 1 cm far away from each other. Changing the distance didn't change much. The container had 4 liters of water and consumed about 1 liter every 15 minutes.

At low voltage about 1,4 volts and using sodium hydroxide i got up to 20 amps with my resonant scheme and water didn't heat up not even a little. However the wire heated up a lot and also the resonant capacitors. Voltage was about 300v with that conditions starting from 12v battery.

Hello


I discovered how to get ultra pure water.


I found that there is a resin witch are very tiny balls witch you can put inside a tube and if you pass water thru it all ions (impurities) will remain in the resin...


The water can become very pure...


If you add an osmosis reversed membrane than in series you will get ultra high purity...




The ideal would be to have water coming from the tap going to a activated charcoal filter and than pass thru this resin and than reversed osmosis...


This way 1 liter of resin (about 20 euros) will make up to 400 liters of high purity water...


I thought that would be a good idea to have a pump recirculating water from the cell thru this resin and osmose reverse membrane to keep the water as pure as possible..


I have just changed the water here and got for 112 vdc across the water i have now 32ma flowing ... So its more than 3000kohms in my case for a capacitance of about 1,2 nanofaradays




If i want to charge the water to 3kv i would need only 1 amp flowing thru it... I guess


I think that if i wash my cell again some times this resistance will become greater... My water have not being reversed osmosis purified...


only passed twice into this resin the guys who sold me the water told me... he also told me the conduction was 3 micro siemens...   






SO


if you want a cell that keeps its resistance it must be closed... and if you want even better you need to recirculate the water thru this filters....

The main problem with plain electrolysis is this BEMF which is caused by the hydrogen and oxygen acting like fuel cell.

Hi Steve,

I have being thinking about how to make the output of the car to be gas ions instead of Plain H20... maybe OH-, If you think about If our output from the exhaust could be OH we would double the number of reactions of the H2 we are injecting in the motor thus we could have instead of 18 grams reacting we would have 34 grams. This is almost the double of the mass reacted so if we have an increase in mass according to the relative theory Ein Gas // DET  Md  Cˆ2  you will also have an energy increase...

I was thinking about and i was thinking about a video i saw in youtube that was about electrostatic induction, and i was thinking about if it in base is't related to magnetism some how... well, i was thinking that what we are really having to do on what we call ionizer (gas processor...)  could induce charge on the gas by electrostatic induction for almost free because if you don't touch the conductors you won't discharge the dipole of the high voltage field.. . Meaning if you don't reach a spark ... That to say, maybe the gas processor didn't took much electrons of it just gave a charge on the gas as much as positive as it is possible, thus there would be the history where Meyer told us "hey i'm the big oxygen atom, you hydrogen come here lets bound together, but remaining the oxygen with an overall positive charge it won't allow other positive hydrogen to bound... OH+

Maybe?           

To give the gas a high positive charge, we should have a dielectric material such as aluminum oxide or something like to act in the negative voltage zone splitting the dielectric in two allowing the positive zone to be where the gas is passing...

I read about this on many ozone patents...

So we still need a considerable amount of hydrogen to run the car right ...

Well maybe if we could create O4 or O5 O6 i don't know maybe we could create molecules in the output like O2H O3H having a huge gain in mass, having a enormous amount of energy exceeding many thousand's barrels of oil with one liter of water...   Maybe .. LEts do the calculation to see if it works

E= m* c ^2

lets take 1 liter of water 1000g

the amount of gain in mass of oxygen if it would just become OH would be 888g so that would become 1888 grams, so we take

E = 1888g * c^288000000 m/s

E= 8.94e+16 I don't know the unit maybe joules...

 


 

What test did you passed?

congratulations

Who know what was his first patent? or the order in witch he patent them? I think that maybe the canadian was the firsts...

I can only tell you that he ran his buggy only with the Gas Electrical Hydrogen Generator and his tube cells.

The GEHG i only the energy source i might guess. As he states in his patents that it is a energy source that uses the pressure as counter acting force against back electromotive force caused by the extraction of the electricity from the force.

The pressure he talks on the video is generated by the BMF inside the GEHG.

I'm going to prove this too.

However there is another ways.

One is by creating a OU device using permanent magnets to cause a permanent vortex where you can extract electrical energy directly. Or you can create a permanent magnet motor connected to a generator.

We have what i believe to be the best way but as haven't being ever mentioned in any patent i'm not allowed to share.

But i can tell you that OU multiplication can derives from cascading this ou devices.   

The plate or tube cell is not ou until it is plugged into another invention.

Thats what he meant by dividing the technology in many patents to be able protect the technology, hes over unity comes from the combination of the patents. 

Until you understand this you wont see no ou.

Hi you all,

Yes steve he is saying that will work like a piano in a wood room. Can be who knows...

But however he is not getting oxygen out of that because the diode is oxidizing.

Regards

Hello guys


I think is possible to absorb this energy using a coil, but we need to know where the fields are going (direction)... We should also want to know why there are this fields and what create them to understand why is the frequency so low.


Well I think that the coil also must be Very big..


I think tesla builded the winderclift for extracting energy from the electrostatic field of the earth.


He might have created a resonant tank able to support millions of volts and huge amperage and it would just resonate by itself charging from the sky...


Than he created another tank tuned to receive the electro magnetic energy irradiated from his giant coil.


Do you remember Benjamin Franklin discovering the atmosphere electricity with his kite?