Fuel-Cell

In almost all cases of scientific accomplishments, spin-off technology occurs. The Water Fuel Cell is no exception. For every cause there is a reason and for every reason there is an answer and for every answe…

An patented Electron Extraction Circuit is incorporated into the Fuel-Cell circuitry to produce Electrical-Energy directly from water which, in turn, aids the Voltage Stimulation Process (Electrical Polarizati…

…ng applied to primary coil (26) of Figure (3-21); and secondly, regulates gas pressure of Fuel Cell (120) of Figure (3-22), as graphically depicted in Figure (3-15). Figure (3-21) Figure (3-22) Each regulatory…

…witch-off" power loading to Electronic Control Unit (B) ...electrically de-energizing the Fuel-Cell ...stopping gas-flow to engine. Oil Pressure Switch (SW2) is activated when engine oil pressure "Drops" to a…

…erived from and supplied by the water bath) back into the sustained hydrogen gas-flame or Fuel-Cell causes the gas-flame temperature to be "changed" or "altered" by way of the Gas Retarding Process, as illustr…

Spark-Ignition of the Fuel-Cell gases (B/D) is prevented when the "Gas Retarding Process" is used in conjunction with a "Quenching Circuit", as illustrated in Figure (2-3), (2-4), (2-5) and (2-6). The non-comb…

…d injection technology help ensure performance reliability and usage ... especially since Fuel Cell (120) of Figure (3-24) is miniaturized to Water Fuel Injector Plug (40) of Figure (4-2), as further illustrat…

To further ensure proper Fuel Cell optional performance during frigid or below freezing weather conditions, Steam Resonator assembly (450) of Figure (3-46) is inserted into Fuel Cell (120) of Figure (3-24) and…

…from water bath (68) ... producing purified water bath (156) which is recycled back into Fuel Cell (120) of Figure (3-24) since Resonant Action (170) also function as and performs as a water-pump (Gas rising)…

…gure (3-1). This "shut-down" or "Switch-off" condition helps provide a fail-safe operable Fuel Cell (120) of Figure (3-20) by negating acceleration beyond driver's control.…

The Quenching Disc is extended into a Flexible Tube to transport the Fuel-Cell gases safely over long distances, as illustrated in Figure (2-7). The Spark-Arresting Gas-Line is, hereinafter, called "The Quench…

…the resonant frequency properties of water bath (68) of Figure (3-22), as illustrated in Fuel Cell (120) of Figure (3-24). Figure (3-22) Figure (3-23) The resultant interfacing voltage circuit (190), now, exp…

…Port Disc compensates for increased Gas-Velocity while "preventing" spark-ignition of the Fuel-Cell gases. The overlapping Flame-Pattern re-ignites the expelling hydrogen gas-mixture (B/D) should Flame-Out occ…

…_19900913_english_1&df=11&dt=20 Stan Meyer, Grove City resident and inventor of the Water Fuel Cell technology which allows an engine to run on any type of water, has been preaching for the past ten years abou…

…e have not. But one Grove City man may have the greatest invention of them all—the "Water Fuel Cell." Stan Meyer appears to have the answer for the most difficult question ever asked: What will the human race…

…r molecule and the use of voltage zones for splitting water into hydrogen and oxygen, the Fuel Cell is easily adaptable to all types of energy needs. Not only that, but the Water Fuel Cell is a retrofit system…

WATER FUEL CELL Quenching Circuit Technology on how to Render Hydrogen Safer than Natural Gas by Stanley A. Meyer, 3792 Broadway, Grove City, Ohio 43123 Copyright © 1981 By Stanely A. Meyer© under UCC 1987 By…

THE NEED TO RENDER HYDROGEN SAFE: Not only can the Fuel-Cell economically produce. a huge amount of hydrogen gas on demand, it can also adjust the burn rate of the hydrogen gas to co-equal the burn rate of fos…

…become actively involved in it. His name is Stanley Meyer, the man who invented the Water Fuel Cell, recently attended a Pentagon visit with Lt. Gen. James Abrahamson, the man in charge of the program. "The pu…

…ventor Stanley Meyer of Grove City is creating a great deal of excitement with his "Water Fuel Cell" that efficiently extracts hydrogen from natural water for use as fuel. Meyer first released his technology t…

…y_19900125_english_7&df=1&dt=10 Stan Meyer, Grove City resident and inventor of the Water Fuel Cell, a means of obtaining energy from water, has been working for over nine years on the development of the techn…

…n of Grove City resident, Stan Meyer. The 1984 copyrighted story introduced Meyer’s Water Fuel Cell technology to the public and told how Meyer was developing a new energy source using the hydrogen and oxygen…

…_19871029_english_1&df=11&dt=20 Stan Meyer, Grove City resident and inventor of the Water Fuel Cell technology, which allows an engine to run on any type of water, has been preaching for the past ten years abo…

…t happened last Friday. That is when he drove his water-powered car, powered by the Water Fuel Cell, in a road test for the first time. Among the witnesses were the Grove City Record; several friends and relat…

…announcing that land has been acquired for Phase I and II of the... ...the proposed Water Fuel Cell Product Development Trade Center and that construction of facilities is scheduled to begin soon. The land is…

…ions free from dependency on OPEC oil. He did this by inventing and perfecting the “WATER FUEL CELL”. The Water Fuel Cell uses natural water (such as tap, lake, river, snow, rain, distilled, reservoir, pond, o…

…tronomically from natural water. This is simply done through the use of a Resonant Cavity Fuel Cell, as so illustrated in Figures 12, 17, 19 and 20. RESONANT ACTION AND THE PHENOMENA: The Resonant Action (as g…

…ecomes potential energy since the flow of amps is restricted across the plates. Since the Fuel Cell uses voltage potential (remember, voltage is pressure or force within an electrical system called potential:…

ENERGY of the FUTURE WATER FUEL CELL Copyright © 1990 by Stanley A. Meyer - Rahm & Zeit WFC Hydrogen Gas Management System - Part I The WFC Hydrogen Gas Management System encompasses many processing patents in…

…all the processing patents on the complete technology of a major invention like the Water Fuel Cell technology. "The ramifications are unbelievable," Meyer said. Meyer is referring to his solution as the Water…

Preface On Development: The Water Fuel Cell technical approach is based on the design philosophy that the same engineering design criteria of one system applies to all systems regardless of size...being a retr…

…ough Meyer, who believed he was close to perfecting the formula, died Saturday, his water fuel cell technology is expected to be carried on by his twin brother, Stephen. Stanley Meyer, 57, was pronounced dead…

…s. He needed to develop a system that conformed to his development specifications for the Fuel Cell. These specifications would allow the device to be constructed easily and economically, without the aid of hi…

Inherently, the Water Fuel Cell allows the "Burn-Rate" of Hydrogen to be "Changed" or "adjusted" from 325 cm/sec. to 42 cm/sec. (Co-equalling Natural Gas Burning levels) since Non-Combustible Gases (such as Ni…

…reality than it was this time last year. Stan Meyer of Grove City, inventor of the Water Fuel Cell, a new technology that would allow vehicles and other internal combustion engines to run on water, has announ…

Water Fuel Cell Technical Base (graphically illustrated in Figure A) is a sophisticated integration of many energy systems integrated together to form a versatile energy package… utilizing sun, air and water t…

…y_19910731_english_1&df=1&dt=10 According to Stan Meyer, Grove City inventor of the Water Fuel Cell, the nations of the world are polarizing to the technology and doors are opening up worldwide. "My objective…

…r. In a demonstration, Meyer showed a flame that was supported by hydrogen from his water fuel cell. The flame was intensely hot. As the flame burned he demonstrated that with the fuel, four gallons of water i…

…the electrolytic process. PRACTICAL DEMONSTRATIONS Many practical demonstrations of Water Fuel Cell technology have already been made and more are planned.Most of Meyer's patents were filed under a particular…

…atened, but he says that even if something should happen to him, he’s made sure the Water Fuel Cell technology will still be developed. Because I’ve written articles and news releases since 1986 about Meyer, I…

…Stanley A. Meyer. For Written approval, fax (614) 871-8075 or send request to below Water Fuel Cell address. Information presented in this WFC Technical Brief is not to be used for manufacturing purposes witho…

Water Fuel Cell Electrical Particle Generator How To Use Magnetized Gas To Produce Electrical EnergyOn Demand Water Fuel Cell(Job 38:22-23)Jesus Christ is Lord Inventor:Stanley A. Meyer3792 BroadwayGrove City,…

The Water Fuel Cell is a patented process that utilizes an solid-state electronic control system to produce hydrogen gas on demand from water by way of voltage stimulation called "The Electrical Polarization P…

…ed by science-fiction writer Arthur C. Clarke and aired on the BBC, focuses on his "water fuel cell" invention. James Robey wants a permanent place for Meyer in his Kentucky Water Fuel Museum. "He was ignored,…

…rgy Generator” is the word group that best describes the process, as applied to the Water Fuel Cell Technology of Inventions, that has resulted in 26 U.S. and international patents with many more pending. Scie…

…ernal combustion This meant that it would have to be stored in either liquid form or in a fuel cell, both of which involved substantial weight or safety problems. Nuclear fusion appeared to be too distant and…

…resultant and on-going Gas Modulator Process (320) of Figure (3-36), now, allows hydrogen fuel cell (120) of Figure (3-24) to be retrofitted to any conventional internal combustion engine (55) of Figure (3-1)…

…renders hydrogen gas as safe as Natural Gas or any other Fuel-Gas ... allowing the Water Fuel Cell to become a Retrofit Energy System.…

…performance, non-combustible gases from the engine exhaust system is meter mixed with the Fuel-Cell Gases under control means, as illustrated in Figure 5. The engine provides the non-combustible gases on deman…

…be altered or change (controlled independent of each other) to obtain peak performance of Fuel Cell System (100) of Figure (3-5).…

…B). Gas Bleed-Off Valve prevents unwanted gas pressure during engine "turn-on stage". The Fuel-Cell Assembly of Figure (7) is directly retrofitted to the car engine without engine-change since the patented Hyd…

WATER FUEL CELL Electrical Particle Generator The Electrical Particle Generator capitalizes on and uses a Magnetized Gas to produce Electrical Energy. Manufacturing the Magnetized Gas required the development…

…supply gases. The utilization and recycling of the non-combustible gases allows the Water Fuel Cell to become a Retrofit Energy System. The Quenching Circuit Technology is systematically activated and performe…

…In almost all cases of scientific accomplishments, spin-off technology occurs. The Water Fuel Cell technology of Inventions is no exception to this rule. For every cause there is a reason and for every reason…

…eable — therefore it's not costing me anything, is it? Consumer Cost Savings of the Water Fuel Cell [60:56] Now if I don't have to change the internal combustion engine — to retrofit the one you're already run…

…was some of the advanced circuitry that had to be developed in the evolution of the Water Fuel Cell technology. This shows the electronic cage with a lot of the electronic components in the testing and develop…

…world and then the end time will come. And that's the purpose and direction of the Water Fuel Cell technology — to set up the financial base capable of completing Scripture. Five Design Criteria for the Water…

…s where this electrical pulse voltage frequency generator will be required to hook to the fuel cell, and I have the patent on that. That now completes this stage of the Water Fuel Cell technology. Two Thrusts:…

…985 - Part 4 (90-120 min) Stanley A. Meyer - Sterling, OH 1985 Water Contaminants and the Fuel Cell as Water Purifier [90:01] Until the water goes out of the fuel cell or reduces down below the exciter element…

…ership system. And the reason I want to do this is because it'll tie back into this water fuel cell deal, so to speak. So let me just talk about that a little bit. It started when I was in high school. It was…

…ct of an overall system provides a source of fuel gas including hydrogen, such as a water fuel cell, 7, described in my United States Letter Patent No. 4,936,961 including water capacitor 8 immersed in a volum…

…ct of an overall system provides a source of fuel gas including hydrogen, such as a water fuel cell, 7, described in my U.S. Pat. No. 4,936,961 including water capacitor 8 immersed in a volume of water 9 which…

…ct of an overall system provides a source of fuel gas including hydrogen, such as a water fuel cell, 7, described in my U.S. Pat. No. 4,936,961 including water capacitor 8 immersed in a volume of water 9 which…

…ollable manner. OBJECTS OF THE INVENTION: A first object of the invention is to provide a fuel cell and a process in which molecules of water are broken down into hydrogen and oxygen gases, and a fuel gas mixt…

…2, 183.1 2 Claims, 3 Drawing Sheets HYDROGEN WATER GAS OUTPUT DISSOLVED GASES WATER LEVEL FUEL CELL rf WATER . CAPACITOR Page 2 Drawing sheet — no readable text. Page 3 D.C. POWER SUPPLY \ PULSE \ GENERATOR GA…

…rollable manner. Objects of the Invention A first object of the invention is to provide a fuel cell and a process in which molecules of water are broken down into hydrogen and oxygen gases, and a fuel gas mixt…

…rical resonant circuit. 2 Claims, 3 Drawing Sheets GAS OUTPUT DISSOLVED GASES WATER LEVEL FUEL CELL WATER - CAPACITOR GAS OUTPUT HYDROGEN DISSOLVED OXYGEN a GASES © 6 ° WATER LEVEL B cl qin WATER. y FUEL CELL…

…f This invention relates to electrical circuit systems useful in the operation of a water fuel cell including a water capacitor/resonant cavity for the production of a hydrogen containing fuel gas, such as tha…

…equency of resonance is identified, by varying applied pulse voltage to the initial water fuel cell assemblies, 2, 3, the ultimate explosive energy output is likewise varied. By varying the pulse shape and/or…

…y to control the gas production rate the method and apparatus of the invention provides a fuel cell that is a constant energy source. In practical application, there is no need for secondary storage medium for…

…In my patent no. 4,936,961, "Method for the Production of a Fuel Gas," I describe a water fuel cell which produces a gas energy source by a method that utilizes water as a dielectric component of a resonant el…

…In my patent no. 4,936,961, “Method for the Production of a Fuel Gas," I describe a water fuel cell which produces a gas energy source by a method that utilizes water as a dielectric component of a resonant el…

…ntermixed with ambient air to produce an extra supply of gases beyond the capacity of the fuel cell. The combustible gas mixture enters into the combustion chamber and by spark ignition acts upon a mechanicall…

…gure 11. Each of these factors have been taken into consideration in the development of a fuel cell to provide optimm results for a preferred embodiment. As stated above another factor affecting the gas genera…

…yright© 2001-2004 by Stephen F. Meyer, All right reserved. BACKGROUND OF INVENTION [0002] Fuel cell and auto industries have been looking for methods and apparatus that can supply a source of hydrogen and oxyg…

…uration. Each of these factors have been taken into consideration in the development of a fuel cell to provide optimum results for a preferred embodiment. As stated above, another factor affecting the gas gene…

…uctor coils (9 and 12), made of resistive wire, act as DC current limiters during initial fuel cell charging; the low-Q resonant charging circuit of the fuel cell (10, 11) in series with choke-coils (9, 12) st…

To ensure proper Fuel Cell operation during frigid or below-freezing conditions, the Steam Resonator assembly (450, Figure 3-46) is inserted into the Fuel Cell (120, Figure 3-24) and thermostatically activated…

The water fuel cell (7) includes a water capacitor (8) immersed in a volume of water (9), producing a hydrogen/oxygen and non-combustible gas mixture (10). The Voltage Intensifier Circuit (12) regulates voltag…

When used with a water fuel cell per U.S. Pat. No. 4,936,961, the preferred management system includes a pulse generator for fuel gas production and a phase lock loop circuit that detects and scans a resonant…

When used with a water fuel cell per Letters Patent No. 4,936,961, the preferred management system includes a pulse generator for fuel gas production and a phase lock loop circuit that detects and scans a reso…

The Water Fuel Cell produces a uniform gas-mixture (B/D, browns gas/detonation gas) regardless of the gas flow-rate of the Fuel-Cell, and only when needed.…

A quenching circuit was developed to prevent spark-back into the fuel cell, and quenching tube technology allows distribution of fuel cell gases without spark ignition.…

Since the Fuel Cell utilizes voltage to dissociate the water molecule, the Fuel Cell becomes a multi-gas generator, producing hydrogen, oxygen, and ambient air gases (water contains 17% to 19% per volume of am…

Water purification is performed in three steps: contaminates remain in the Fuel Cell since voltage dissociates the water molecule; the sustained hydrogen flame kills bacteria attached to the Fuel Cell gases; a…

…o switch-off power loading to Electronic Control Unit (B), electrically de-energizing the Fuel-Cell and stopping gas-flow to the engine.…

…rogen storage is not required since hydrogen gas is being produced on demand by the Water Fuel Cell system.…

The Water Fuel Cell generator uses at least a pair of plate exciters within a water-containing vessel, driven by a variable voltage source that converts input voltage to uni-polar d.c. voltage pulses applied t…

The water capacitor of the fuel cell consisted of two concentric cylinders 4 inches long; the outside cylinder was 0.75 inch outside diameter, the inner cylinder was 0.5 inch outside diameter, with a spacing o…

In Example I, the water capacitor of the fuel cell consisted of two concentric cylinders 4 inches long; the outside cylinder was 0.75 inch OD, the inner cylinder was 0.5 inch OD, with a spacing of 0.0625 inch…

Once the resonance frequency is identified, gas output from the water fuel cell is varied by adjusting the applied pulse voltage, pulse shape, amplitude, or pulse train sequence of the initial pulsing wave sou…

The voltage applied to the water fuel cell determines the rate of breakdown of the water molecule into its atomic (hydrogen and oxygen) components.…

The first-stage fuel gas mixture produced by the water fuel cell contains elemental hydrogen and oxygen plus formerly dissolved/entrapped atmospheric gases such as nitrogen and argon, which were dissolved in t…

Water enters a first-stage water fracturing module (water fuel cell) at inlet 1; released gases pass through successive resonant cavities (2, 3, etc.) arranged in series or parallel, with each stage cascading…

The Water Fuel Cell circuit has a high frequency of the order of five kilohertz superimposed through the windings of the field coils, and the circuit is half-wave rectified to allow the capacitor to discharge.…

A gas pressure regulator (13) is positioned proximate the exit orifice of the fuel cell to maintain a consistent back pressure, optimally 15 psi in the preferred embodiment, in the fuel delivery system.…

…system it charges and ionizes ambient air gases (not the combustible gas produced by the fuel cell) on a reduced scale before mixing with the fuel gas.…

…ntroduced at exhaust gate 15, then combined in the intake manifold (35) with gas from the fuel cell (7) at injector port 19, producing a modulated combustion mixture with hydrogen at the correct 2:1 ratio and…

The fuel gas mixture produced by the water fuel cell intrinsically includes the optimum 2:1 ratio of hydrogen to oxygen, which must be maintained uniformly across engine operating speeds to control burn rate.…

…ins constant regardless of engine RPM, even though the rate of hydrogen production by the fuel cell must increase with higher RPM; this is maintained by the tuned gas meter control (18, 19) and the gas managem…

In the Water Fuel Cell, charge from hydrogen and hydroxyl ions builds voltage; the more charge that flows, the more the voltage builds up, and the more ions are pulled out of solution, forming a self-reinforci…

Once the resonance frequency is identified, gas output from the water fuel cell is varied by attenuating the applied pulse voltage, pulse shape, amplitude, or pulse train sequence, including turning the voltag…

In Example I, the water fuel cell's water capacitor used two concentric cylinders 4 inches long: outer cylinder 0.75 inch outside diameter, inner cylinder 0.5 inch outside diameter, with spacing of 0.0625 inch…

The gas released from the fuel cell in Example I comprised a mixture of hydrogen and oxygen from the water molecule plus gases formerly dissolved in the water, such as atmospheric oxygen, nitrogen, and argon.…

The system's fuel gas source is a water fuel cell (item 7, per US 4,936,961) comprising water capacitor 8 immersed in a volume of water 9, producing a hydrogen/oxygen and non-combustible gas mixture (10) fed t…

…age amplitude, pulse frequency and gated pulse frequency associated with operation of the fuel cell 7, and is interconnected to the gas management module (referencing US 4,936,961 Fig.1 and US 4,798,661).…

The gas pressure regulator 13, located proximate the exit orifice of the water fuel cell, maintains a consistent back pressure, optimally 15 psi in the preferred embodiment, in the fuel delivery system.…

…processor (20/40) treats only ambient air gases (not the combustible gas produced by the fuel cell) on a reduced scale — the gases are charged and ionized and energy-enhanced before being mixed with the hydro…

The fuel gas mixture produced by the water fuel cell intrinsically includes the optimum 2:1 ratio of hydrogen to oxygen, per Stan Meyer's Letters Patent No. 4,936,961 process.…

…oduced to the cylinder at intake is the same per cycle regardless of engine RPM; although fuel cell hydrogen production rate must increase with higher RPM, per-cycle hydrogen consumption remains constant, main…

On the charging side of the Water Fuel Cell circuit, ions are pulled out of the dielectric water and moved toward the metal electrodes; on the discharging side they may go back into solution, and a portion of…

…states that the utilization and recycling of the non-combustible gases enables the Water Fuel Cell to become a Retrofit Energy System, implying integration of the Quenching Circuit Technology with the WFC for…

The Water Fuel Cell inherently allows the Burn-Rate of Hydrogen to be changed or adjusted from 325 cm/sec to 42 cm/sec, co-equalling Natural Gas burning levels, as illustrated in Figure 2-3.…

Natural water acts and performs as a Gas-Mixing Regulator when the Fuel-Cell is electrically energized by way of voltage stimulation, i.e. the Electrical Polarization Process.…

The Water Fuel Cell circuit is a novel form of electrolysis in that no net current needs to flow around the circuit; while the voltage applied is zero, ionised charges are able to recombine without flowing aro…

…supply of B/D gases being released from the water bath is terminated and stopped when the Fuel-Cell becomes de-energized, leaving unused water as a non-burnable liquid.…

The gases (B/D) that accumulate above the water bath in the Water Fuel Cell are vented for safety purposes.…

…by the water bath, is captured and recycled back into the sustained hydrogen gas-flame or Fuel-Cell, causing the gas-flame temperature to be changed or altered via the Gas Retarding Process (Fig. 2-4 vs Fig. 2…

…rocess, the gas flame-temperature remains constant regardless of the gas flow-rate of the Fuel-Cell.…

The Gas Combustion Stabilization Process automatically changes the Burn-Rate of the Fuel Cell gases (B/D) in order to obtain the desired gas-flame temperature.…

Spark-ignition of the Fuel-Cell gases (B/D) is prevented when the Gas Retarding Process is used together with a Quenching Circuit, as illustrated in Figures 2-3, 2-4, 2-5 and 2-6.…

…iameter prevents the moving gas atoms from re-grouping, which stops spark-ignition of the Fuel-Cell gases.…

The alignment of the Fuel-Cell gases (B/D) inside the tubular passageway is called the Quenching Circuit.…

…s-Port Disc compensates for increased Gas-Velocity while preventing spark-ignition of the Fuel-Cell gases.…

The Quenching Disc is extended into a Flexible Tube to transport the Fuel-Cell gases safely over long distances, as shown in Figure (2-7). This Spark-Arresting Gas-Line is called 'The Quenching Tube.'…

…chmitt array (2a...2n) produces a similar shut-down, providing fail-safe operation of the Fuel Cell (120) by negating acceleration beyond driver's control.…

…voltage potential (32) applied to primary coil (26), and it regulates gas pressure of the Fuel Cell (120).…

…33), preventing Fuel Gas production beyond a predetermined gas pressure level (34) during Fuel Cell operations, and maintains constant gas pressure to Fuel Injectors (36) regardless of engine RPM.…

…ates Safety Control Circuit (14), which switches off applied electrical power (28) to the Fuel Cell electrical system (400).…

…) can be altered or changed independently of each other to obtain peak performance of the Fuel Cell System (100) of Figure (3-5).…

…y generator (70)—to match the resonant frequency properties of the water bath (68) in the Fuel Cell (120).…

The Gas Modulator Process (320) allows hydrogen fuel cell (120) to be retrofitted to any conventional internal combustion engine (55) without engine change, simply by metering the proper amount of exhaust gase…

…tatic Filter Process produces a purified water bath (156) which is recycled back into the Fuel Cell (120) of Figure 3-24, since Resonant Action (170) also functions as a water-pump (causing gas rising).…

…s as a water-pump due to gas rising, enabling circulation of purified water back into the Fuel Cell.…

The efficiency of the Water Fuel Cell process depends on the tuning frequency of the LC circuit and having this balanced with the mobility of the ions and the spacing between the plates; a relaxation time afte…

The Water Fuel Cell is a patented process using a solid-state electronic control system to produce hydrogen gas on demand from water through voltage stimulation, called the Electrical Polarization Process (Fig…

The Fuel-Cell is composed of Resonant Cavities pre-arranged to maximize Fuel-Energy delivery to the car engine, as illustrated in Figures 2-4.…

The Fuel-Cell Assembly of Figure 7 is directly retrofitted to the car engine without engine-change, because the patented Hydrogen Gas-Mixture matches the burn-rate of Alcohol, dropping from 325 cm/sec to 44 cm…

…ance, non-combustible gases from the engine exhaust system are metered and mixed with the Fuel-Cell Gases under control means, as illustrated in Figure 5.…

…en a car crash occurs, forming part of the Safety Control Circuit (H) that shuts down the Fuel-Cell system.…

Drop-out Relay-Switch (SW4) is activated when the Electronic Control Unit (B) senses a Fuel-Cell malfunction, part of the Safety Control Circuit (H).…

Retrofitting the Water Fuel Cell to a vehicle does not compromise safety integrity but promotes driver safety since water is a non-burnable fuel-liquid, unlike conventional flammable fuels.…

…f Argon (Ar), the dielectric gas used in the Electrical Particle Generator, not the Water Fuel Cell.…

…en and oxygen gases from water; dissolved ambient air gases are also released, making the fuel cell a multi-gas generator.…

…he resonant cavity (44) and gas attraction zones (57) are submerged in natural water, the fuel cell housing is composed of electrical insulating material such as plastic or spun glass; positive and negative te…

The resonant cavity fuel cell can produce more than 115-cc/min of gases at one amp leakage.…

…ing transient startup, unidirectional diode (14) is non-conducting and isolates the water fuel cell from the high-voltage multiplying component (8), allowing the cell to take a positive charge during each high…

System setup requires filling the water fuel cell, adjusting excitor plate distance/volume, connecting to the VIC, then tuning to the resonant characteristic of the total system by adjusting the pulse frequenc…

The water fuel cell can produce more than 100 cc/min of gas output while only 1 amp of current leakage occurs, demonstrating high gas yield with minimal amp flow.…

By using voltage attenuation with the fuel cell, ambient air is allowed to uniformly mix with the liberated hydrogen and oxygen gases, reducing the hydrogen gas burn-rate from 325 cm/sec down to less than 47 c…

The fuel cell sustains a constant, high-temperature hydrogen/oxygen flame beyond 5000°F, with flame size controlled by amp flow, unlike prior art which requires a continuous gas-ignitor to maintain combustion…

In adapting the Water Fuel Cell for use in an ordinary car, Meyer utilises laser light to stimulate the transfer between energy levels and increase the efficiency of the hydrogen-formation process.…

A self-cleaning fuel cell was developed by way of voltage application: voltage pulses perform a scrubbing action on the plates that prevents an oxidizing coat/film from forming (by retarding chemical interacti…

During the bench demonstration of the Water Fuel Cell, dissociation of water into hydrogen and oxygen by pulsed voltage stimulation was observed to begin at about 10 volts and increased markedly with increasin…

…t of ambient air gases, and this ratio remains the same regardless of the gas rate of the Fuel Cell.…

…are captured, flow-regulated by a gas valve (11), and recycled back into the flame and/or fuel cell prior to ignition, allowing the flame temperature to be lowered below that of burning paper.…

The Quenching Nozzle (20) prevents spark-back into the Fuel Cell during gas ignition; fuel gases pass through a small elongated gas port (5) smaller than .015 inch diameter but equal to or greater than 1/8 inc…

Multiple Quenching Circuits (5a...5n) are used to prevent flame-out when the Fuel Cell gases exceed a certain gas velocity, and quenching circuits are prearranged so an adjacent flame can re-ignite expelling f…

Hydrogen gas released by the Water Fuel Cell was initially a cool jet, but when lit by a match the flame melted stainless steel wire at a temperature of about 3,000°F, demonstrating the high combustion tempera…

…elf-regulating, storing water in a catch basin (18) for drinking or recycling back to the Fuel Cell.…

…er gas output (Figure 7), with variable voltage fields exceeding hundreds of volts during fuel cell operation.…

As ionized gases accumulate inside the Fuel Cell, the resulting electrical charging effect (G) can become greater than the applied voltage itself, further accelerating the Electrical Polarization Process.…

…ormation from natural water, the electrically charged gases (1/2) are expelled out of the Fuel Cell and enter into the Electrical Polarization Generator (90), as shown relating Figure 20YAA to Figure 3B and Fi…

Testing equipment included a Variable Flat-Plate (Water Fuel Cell) labeled E1A paired with a Solid State Amp Inhibiting Circuit labeled 8XA, measured using a TIF Instruments 1000 DC Digital Clamp-on Connection…

The Tubular-Array Water Fuel Cell (E2A) was tested at an electrical power loading of 12.5VDC @ 40 amps = 500 watts.…

The power to the Water Fuel Cell circuit comes from an alternator connected across a stainless steel capacitor with water between its plates; the dielectric water itself provides the charge that charges up the…