Dynodon

Here are the schematics to replicate the variable plate controller vic.I got this info directly from the control box.
Enjoy!
Don

For anyone who ordered the dvd and didn't receive the excel spreadsheet in an email,pm me your email address and I will send it to you.
 
stanmeyerlives, the slots are where the water and gas enter and exit. The water flows in up through the bottom hole in the negative rod and comes out through the slots in the bottom,then it passes up through between the tubes.Then the water and gasses go through the slots into the top of the negative rod and goes out through the hole in the top.Water is constantly flowing through these tubes.
 
Sharky, the wire gauge is 29.It was measured with the coating.I seen all of the wire Stan had,and he had alot of 29 gauge.Every company that make wire,has a minimum and a maximum that the wire can be.
 
Don
 
 

I sent out everyones photos today that has paid.They all went out priority mail,so for those in the states,expect 2-3 days and overseas 6-10 business days.
 
Ali,with everyting I sent,one should be able to replicate the whole resonant cell and circuit.All the info for the vic coil packs is there,pictures, wiring and sketches as to how it was wired. Remember there's over 400 pics.
 
Thanks again everyone,and I hope you all enjoy them.If you have any problems with reading any of the info,or get a damaged one, let me know and I will take care of it.I checked every copy and they all copied fine.
 
Don

Just a note for everyone who purchased my pictures and notes,Once you recieve your order,I will delete all of your personal info from my computer.I won't keep anyones info after  I know you got what you order.I also won't mention or give out anyones names or info.I have everyones shipping labels made up,and just need to get them to the post office tomorrow.
Don

I have all of the photos and drawings I have all in one place.I am now burning the DVD copies.
I now have 9 people paid in full, and 2 sending their payment by mail.I have enough paid up now and I will be sending everyones copy out monday by USPS priority mail.So some of you that are closest to me should see them as early as tuesday.The overseas guys may take up to 2 weeks,sorry.Hopefuly it will be faster.
 
Thank You everyone for your purchase.I think you will all love this information.
Don

Thanks to everyone here for the fast responce.I now have the 10 people ready for purchase so you can now start sending the money and add a note with the type of media you would prefer.I have heard from a couple of you already.I will get everything together today and I will start sending out the media monday as I recieve your money.
 
Yes I will sell them one at a time now and I won't need them in lots of 10 anymore.
 
Just remember to add the $10 for shipping (in US, $20 overseas) for the DVD or CD's and $20 for the 2 gig usb stick for shipping (US, $30 overseas)
 
If anyone receives a bad disc or broken I will send a replacement or fix any problems that may come up.You will get what you paid for,I Promise.
 
For those who want to use paypal my account is
 
dynodon64@verizon.net
 
anyone who needs my mailing address just PM me here or to my email address,same as my paypal above.
 
Thanks again everyone
Don

Thanks to everyone so far,you won't be dissapointed.
Don

I have about 400 pictures of Stans equipment.I have given you all a few of them here.I am now ready to give out all of my pictures  for a price.
 
I have put alot of time and energy into researching Meyers work,and have collected alot,and given alot.
 
I also have some of my own schetches that show all of the VIC connections to the switches on the panel,as well as all of the connections for the coil packs.I have all of the schematic for the whole VIC system from the patent.I have an Excel spreadsheet with alot of very important info on it that no one else has.
 
Some of these schetches have all of the measurements for the demo cells, and the resonance cell.
 
There is alot of information here, and is worth alot more than I will be asking for.You will not be dissapointed if you purches this.
 
This is a short list of the photos:All three cells opend up,VIC cards,GMS cards,8xa box and the alternator box,EPG's,Steam resonator heater,buggy,alternator winding shots.There is multiple pictures of them all.
 
Everything that I have that is my own,and not anything from the net is in this deal.
 
Now for the price.
This will not be a one only sale.It is available to anyone for a very resonable price.The only catch is that there is a minimum number that will need to be sold before I will sell.
 
I will sell this material when I have 10 confirmed offers to buy.Only after I recieve payment from 10 people will I send them out.
I will not take any payments until there are at least 10 confirmed offers.Then I will collect payment.
I will sell as many as there are people willing to buy,there is no limit,but a minimum of 10 to start with.
 
Now for the price!
 
$100 US !!! Plus shipping
 
There will be three kinds of media available.Cd's, about three,DVD, or memory stick about 2 gig.
 
Now the Cd's and DVD plus shipping will be $10 US,$20 overseas
The memory stick plus shipping will be $20 US,will need to check overseas maybe $30
 
As for payment I would prefer Paypal.I will give the account when I have enough buyers.
If you want to mail a payment,it will have to be a bank check or a postal type money order.All orders will go out US postal.
Any payments sent by mail will hold everyones shipment up untill all money is collected for the first 10 orders.After which any other orders will go out when recieved.
 
Once you get this info,you can do anything you want with it,I don't care.
 
All I want to do it collect a little something for all my work over the last 4 years,and to get back some of the money I have spent.
 
So let me know here by post or PM,and I will let everyone know when I have the first 10 offers.
 
Don
 
 

Shawdow, it isn't that critical on how you cover the tubes.I have pictures somewhere on this site of my single tube set up.
The negative rod only needs drilled to the bottom of the slots in the sides.They don't need to be deeper than that.
 
The Tube set needs to be set in a delrin base,so you need four sizes of countersunk holes.
 
1st hole would be @ 3/8 inch say 2 inches deep.This would be the water inlet.
2nd hole would be 1/2 inch and 1-1/2 inches deep.
3rd hole would be 3/4 inch and 1 inch deep.
4th hole would be the outside diameter of the cover of the outer tube,say 1 inch and 1/2 inch deep.
 
Your first hole would need to go into your chamber for the water to enter.
Anything in that set up will work fine.Donaldwfc has a nice drawing on here somewhere.
 
Don

The resonant cavity has a 2-1/2 inch hole in the center,and the caps were 1 inch O.D. and 1-1/2 inch long.
The center rod was 4 inches long and the outside tube was 2-3/4 inches long.
That should help.
Don

Has anyone taken a good look at the choke coil readings in the spreadsheet that came with the pictures I sold?
I'm talking about the resistance readings taken at different test frequencies.
If you look at the loose coil readings,you'll see that the readings taken with a Fluke,measured @76 ohms.
Then look at the test readings taken at 10khz. You now see 1200k ohms.

That just goes to show how much resistance there is on the coils when resonance frequencies increase.So now we can see that at resonance @ 10khz,you have alot of resistance,which then leads to amp restriction.

Thought I would point this out.
Don

HMS,
My setup is pulling around 200-300ma into the primary.I will test across my diode as you have,and see what I get.

Webmug,
I'm using my delrin cover tube set,that's all I have.
I'd have to look up the cores ui,I don't know it off hand.
The core is a Ferroxcube U core,the largest one they make.The legs are @ 3/4 inch in diameter.
The chokes are in the 10-11 Henries ech,very high.

I'm going to make some new chokes with larger gauge wire and just a couple  hundred turns,to see if more current will help.I'll also try the same idea with the primary and secondary.

Don

In all of my testing,I keep seeing the same effect.The blocking diode doesn't seem to be doing anything,as far as blocking goes.

From what I've read,diodes limit CURRENT FLOW to one direction only.

So the question becomes, If we are restricting too much current with our choke coils,will the diode even work?

How much current does a diode need to switch on and block current from flowing in the reverse direction?

In my testing the signals going into and out of any diode I test is the same signal.No blocking effect.

Any thoughts on these questions.
Don

Ali,as you can clearly see in the pictures of the coil packs,the secondary coil is alot larger than the primary.It is also evident in the readings taken of the coils as well.All of the coils were traced out to their connections.
Don

Nothing Stan invented will work without the basics of amp restriction to allow voltage to take over.I've said it before also,you can't get anything else to work without first making gas with voltage only.Everything else is a waste of time.It can't be done if you don't have the basics of Stan method working first.I don't know why people think that they can make any of his later systems work without the basics.
Don 

HMS-776,
That picture you posted with all the coil packs and white container is the resonace cavity, which has the 11 resonance cells in it.It's not the steam resonator.
Don

Take a look at the scematic,and you will see the amp meter and the volt meter are hooked up at the cell.
This demo unit is meant to show,that restricting amps will allow voltage to go up.That's all it is.Amp restriction so voltage will go up,and that exactly what it does.
Don

sampojo,
The 8xa circuit is a benchtop test unit.It uses ac line voltage of 110 volts.It needs the 120 hz thats generated by the ac voltage through a full bridge rectifier.The only way to use it in a car is with an inverter.Needs ac input.
Don

I just finished testing sebos extra diode on my setup.If my choke coils are on the same core as the primary and seconary,it doesn't work.
But if I have my choke coils on a seperate core, than yes I get half rectified unipolar pulses at the cell,but not the double frequency unipolar pulses.
More testing needs to be tried.Which brings me to another question,I'll post it in a new post here.
Don

it came from Stan's stuff. The core material also came from Stan's collection. I just need to wrap the secondary so I can test it.

So does this mean that you know someone inside Quad City Innovate?