Skip to content
Stan’s Legacy

Aaron

188 posts · 28 threads started · 1,767 more in threads this archive does not carry · writing between Apr 2007 and Aug 2019

An identity on Energetic Forum as it was harvested, not an account on this site. Nobody here has claimed it, and nothing connects it to a person by name.

any magneto plasma results?

Has anyone had ANY success whatsoever using the stock magneto to get the plasma effect?
magneto plasma

Aaron wrote:

The magneto has 2 leads from it.

One is a skinny lead (positive) that goes to the body of the motor.
One lead is fat and (negative) and goes to the top of the plug.
I had this wrong, the skinny lead is basically a shorting wire. When it is in contact with the body, it is shorting the magneto so that it will not run. The lawnmower handle, if disengaged will cause that wire to connect to the body and shut off the motor.

When disconnected, it isn't shorted and the motor will run.

Origin of Oil

#1 ·

This discussion started on
fetch?filedataid=22491

so I started this to keep on topic:

mrbreau wrote:

It sometimes bothers me that with the discovery of petroleum no one has ever undertaken the task to find out what purpose the oil serves the planet.
My idea is that it is tectonic plate lubrication. When there is enough lubrication, the plates can slide more easily. With less, they can get more friction, build tension then release it in earthquakes, which are occuring more and more.

It seems that it can be Earth generated and nothing to do with dinosaurs - one of the biggest hoaxes probably.

But if it possibly came from elsewhere, then the below idea.

In the Kolbrin Bible, it discusses the Great Destroyer (basically describing Planet X or Nibiru) coming close to Earth and full details of what happens to the Earth, the atmosphere, etc... dripping black liquid from the sky to the ground, etc...

Also, check this reference on Immanuel Velikovsky:
immanuel velikovsky oil - Google Search

"Worlds in Collision"

Earth Generated Water

#1 ·

Wow! Thank you and welcome to Energetic Forum Shanjaq!

Shanjaq shared this post on Imhotep's thread:
fetch?filedataid=22491


Talk about ABUNDANCE!

Here is Shanjaq's post, check this out - 2 links at bottom!

Where did the water come from?? Regarding the localized accumulation/formation of water, has anyone read about the work of Stephan Riess?

"In the North American West an important clue to the mystery disclosed by Riess came when, working late at night in a mine shaft, he heard a peculiar hissing sound, similar to that produced by a leaky air tank, accompanied by a trickling of water. What he was observing, he believed, was virgin water being liberated from ore-bearing rock by crystallization processes within the rocks themselves."

"At no time is water static. It is a constantly changing form. It is either liquid or gas, or it is bound up in crystalline form in rocks and minerals. The cycle of gas to liquid to crystal is repeated over and over. Oxygen and hydrogen combine under the electrochemical forces of the earth to form liquid water. Not only is water being constantly formed within the earth, but also rocks, minerals and oil. What I seek is water in its liquid state."





web.archive.org: Stephan Riess | MERLib.org
Infinite Energy: Stephan Riess: Earth-generated Water: a Potential Solution - Rare Article by Morad Eghbal | MERLib.org

Making blank water

#14 ·

Dr. Horst Felsch

Dr. Horst Felsch states of his research into Grander's revitalized water: "it is known that liquids can be primarily activated in the way that part of the inner energy is transformed by means of refrigeration, so that a higher energy content is impressed. Like this, water in its electromagnetic structure has been successfully transformed in the way that -- both by modifying the magnetic nuclear resonance properties (modification of the spin-spin coupling constants), and by the induction and formation of the supermolecular complexes between the single water molecules -- the electromagnetic state of oscillation was modified. These electromagnetic oscillations are responsible for the formation of an electromagnetic field of defined frequency, phase and amplitude, which spreads evenly in all directions. Surprisingly enough, it turned out that, in such an electromagnetic field, larger particles and molecular groups are decomposed into smaller molecular groups, which results in a reduction of viscosity, the dissolution of harmful molecules and the like. And it is also highly surprising that the energetic state of the activated liquid is preserved, i.e., it does not ease off."

Making blank water

#13 ·

Dr. Felsch

IndianaBoys wrote:

Aaron, it is a good reference and starts back on page 161. It is Dr. Felsch.

Searching Google on this topic this interesting subject was located:

Reflection of Mind Projected Thought into Water Photographed

LAB NOTES
Thanks IndianaBoys! I'll reread it if I can find my copy.

That letter G test is interesting!

Making blank water

#10 ·

On the Track of Water's Secret

Jetijs,

In Johann Grander's book On the Track of Water's Secret...in the back by some scientist..can't recall name off hand...had a great explanation of how homeopathy works. Very interesting!

Spiritual Nutrition: Six Foundations ... - Google Book Search
this link isn't what I'm mentioning but is just a reference...check out that page though.

Revitalized Water - Dr. Johann Grander

Universal Tao: Track
this one has the reference. This page has a lot in SMALL but has the Ludwig references.

Johann Grander has one of the most effective ways to erase water's memory. I personally have the mini Penergizer and it is incredible!

Making blank water

#9 ·

heat shock resistant glass

Hi Jetijs,

The Pyrex glass is made specifically for temp changes. You can pull it out of a hot over after baking something then immediately put it into the refrigerator.

Pyrex is a popular glass brand name for this kind of glass and most people in this country probably have a quart measuring pyrex "pitcher" in their kitchen.



Whether or not it will stand up to being filled with ice and having the flame on it, I don't know but it is cheap enough to find out. Probably less than $10 US for a quart or so size or more.

There are pyrex lab glass or other brand of glass for lab use that are for rapid temperature changes available.

Check this out:
Borosilicate glass - Wikipedia, the free encyclopedia

Making blank water

#6 ·

homeopathic diesel

Jetijs wrote:

Some Russian scientists had some methods of erasing the structure of water so that it will take any structure you want. They took a bottle of such water and dropped some drops of diesel in it. Then shacked the bottle and let it rest for some minutes. After that, the water had taken properties of diesel and did burn. So if you can erase the memory of the water, you can make it "think" that it is gasoline or wine or whatever you want and it will act like that. Maybe this was how Jesus turned water into wine


Aaron, it will condense on glass, but as the glass gets warm, the condensation stops and you can not cool the glass because it is a good insulator.
Sounds like homeopathic diesel! Take it and don't just shake it but pound a closed jar of it pretty hard against a leather pad like a baseball mitt. Do it a few hundred times minimum. That is called succussion. That is your 1X mixture.

If that does work, then you can take a 1 part of that mixture and add it to 9 parts of fresh batch of "blank" water. Do the succussion process again and it should get STRONGER. This is your 10X mixture...you can continue many times.

After the 13th dilution, there are no more molecules of the original diesel left and each dilution gets stronger and stronger. (Avogadro's number - I think this is the correct reference. You can only fractionate it so many times until there isn't any left of the original molecules.)

Maybe if you used pyrex glass, you can fill it almost full with ice cubes and put the flame on the outside and let it drip down into a clean glass. Maybe the glass will stay cool enough until the ice melts then pour out the melted ice and replace with ice.

Making blank water

#3 ·

reset water

Will it condense against clean stainless steel? Aluminum is not a healthy metal if you did want to drink it or something. Will it condense against glass? That might even be better than stainless steel.

If you take the hho output without the flame and bubble it through pure distilled water for a while, wouldn't that water take on the properties of being reset?

Powerweld

#3 ·

this patent references the powerweld patent

THIS IS NOT THE POWER WELD PATENT - IT SIMPLY REFERENCES THE POWER WELD ONE IN CASE THERE IS A CLUE....THE POWER WELD PATENT PICTURE DOES NOT COME UP.

This Philippine patent references the power weld one:
Electronic Gazette

[21] Application Number:1 -2005-000588 [54] Title:HAND-HELD AC/DC ELECTRIC WELDING AND SOLDERING MACHINE [72] Inventor(s): EDGARDO S HERMINIGILDO, OF LAGUNA, PHILIPPINES
[73] Assignee(s): EDGARDO S HERMINIGILDO, OF LAGUNA, PHILIPPINES
[74] Attorney/Agent:NONE [22] Date Filed:12/1/2005 [30] Priority Data:NONE [51] International Class7: B23K 9/10 [57] Abstract:
A welding machine adopted to be connected to power supply (1), a primary power coil (5), a secondary coil (6) connected to said primary power coil (5), a pair of diodes (4, 3) connected at the input sides of the connection and a welding rod (2) holding means.

Representative Drawing(s):
Note: If distorted or out of proportion, pls. click the drawing itself to view its enlarged format with the correct proportion

Search Report
[58] Field of Search: B23K 9/10 [56] Documents Considered to be Relevant

CategoryCitation of Document APH 1200002181 (FRANCISCO ANDRADE) APRIL 28, 2004 (WELDING MACHINE ) APH 30388 (ROGER BENOYO) MAY 24, 1997 (WELDING MACHINE) AUS 4672175 (ROBERT W. NIVEN) JUNE 9, 1987 (ARC STARTER FOR WELDER ) AUS 5283419 (SEIGO HAGIWARA, ET. AL.) FEBRUARY 1, 1994 (ARC WELDING MACHINE AND METHOD ) YUS 6570128 (FRANCO MELA) MAY 27, 2003 (GENERATOR FOR ARC WELDING MACHINES) XUS 6593546 (FRANCO MELA) JULY 15, 2003 (ARC WELDING GENERATOR WITH INPUT VOLTAGE)

I do NOT know if this is even close, but this is the pic of this patent which is NOT the power weld one. Interesting the pic is missing for the power weld one. But maybe useful?


Powerweld

#2 ·

Increweld | Power Weld

Thanks for posting that Boguslaw!

I believe Daniel Dingel in the Philippines got the idea for his water powered car circuit from some welding application. Maybe this is related to it and it comes from the Philippines as well. Incredible little machine. It seems besides the Power Weld name the REAL one is also called INCREWELD:
  • The ORIGINAL, The One & Only Patented World's Smallest Welder
  • All purpose heavy duty Welding Machine
  • It does not OVERHEAT!
  • 100% duty cycle Ensures High Quality because of capability for continuous full welds without gaps.
  • Workable with Stainless Steel, CastIron, Ordinary Steel and C2 Welding Rods.
  • Capable of delivering 200 to 500 Amps.
  • Cost Savings - Meter runs only during actual spark
    Lightweight and Convenient

INCREWELD is the ORIGINAL World's Smallest Welding Machine. The machine was invented by Frank M. Andrade and manufactured by Andravel Incorporated under Patent no 1-200-02181 granted by the Philippine Patent Office in April 28, 2004.



INCREWELD


The INCREWELD welder is a must have for craft artists, metal sculptors, metal fabricators may they be professionals, apprentices or enthusiasts. It is advantageously cool to be used in every workshop.


The edge of the INCREWELD aside from being conveniently small and lightweight (1.6kgs) is its zero heat at prolonged and continuous operation. Quality of welding is superior as duty cycle could be extended as desired. Continuous full weld fusion is very much possible. Moreover INCREWELD consumes less electricity as current runs through it during actual welding only.


The INCREWELD has 2 years warranty and it is expected to last a lifetime as it does not overheat and no mechanical moving parts are present for wear and tear. The first unit assembled in 2003 still runs up to this time being used for demos.












site coming soon:
This Web site coming soon

Patent info brief:

Industrial Property Digital Library for Patents

Category : INVENTION Application Number : 1200002181 Patent Number : 1200002181 Filing Date (mm/dd/yyyy) : 08/14/2000 Date Issued (mm/dd/yyyy) : 04/28/2004 Title : WELDING MACHINE IPC : B23K 9/007 PH Class :
Inventor/s : , of
Applicant/Assignee : FRANCISCO M. ANDRADE of PH
1st Publication Date (mm/dd/yyyy) :
2ND Publication Date (mm/dd/yyyy) :
Abstract : A welding machine comprising a coil of wire being embedded within a cement block, both being enclosed within a PVC pipe, all being contained within a housing, said wire having both of its ends extending from said housing and are connected to attaching members opposedly held on said housing, a cord connected to one of the attaching member for connection to a single line of a power source and another cord connected to the other attaching member for connection to a welding rod, said welding rod adapted to be attached to the object to be welded and a ground metal bar, adapted to be buried on the ground, adapted to be connected to the object to be welded.
Status : Granted Representative Drawing(s) :
The above drawing did not come up for me..it is supposed to be blank here.

Inventor full first name is: (Francisco - not Frank)
CategoryCitation of Document APH 1200002181 (FRANCISCO ANDRADE) APRIL 28, 2004 (WELDING MACHINE )
The purpose of this thread is for discussion about Nathan Stubblefield's work on Earth Batteries, Wireless Telephone and other Earth-Powered devices.

In this forum, this thread has quite a bit about Earth Batteries:
fetch?filedataid=22491


A great resource is John Bedini's pages on Nathan Stubblefield:
Stubblefield
New Page 2

This is the homepage for the book that documents Nathan Stubblefield:
Nathan Stubblefield, Kentucky Farmer Invents Wireless Telephone, Radio by Bob Robert Lochte
opposite voltage polarity

Can you post the context that it is used it? Maybe one short paragraph from Meyer's descriptions?

430 FR inductance wire

#3 ·

ss wire - also different Aaron

Hi, that is also Aaron H you are mentioning.

Also, did you see the Meyer NZ video and hear his comments about the ss wire?
Aaron H

Hi Dankie,

That is another Aaron - Aaron H.
I just skyped a message to him if he wants to respond to this.