188 posts
· 28 threads started · 1,767 more in threads this archive does not carry
· writing between Apr 2007
and Aug 2019
An identity on Energetic Forum as it was harvested, not an account on this site.
Nobody here has claimed it, and nothing connects it to a person by name.
5.5/2=2.75\ so Pi * 2.75*2.75*4.2099=100*2=200 cid
The Stroke ratio I have chosen "from Russ's guidelines was calculated at 5.5/1.306444... the range is suggested as an application guide. ie: Long stroke gives greater HP, I chose Lower HP at any given rpm.
One of the most serious obstacles is in harnessing this rotational energy.
I will design a clutch system that will qualify for this task.
I have started serious contemplations about building some of these engines.
Everything to me seems like a strategy in essence so Lots of thinking before building..
I have a lathe, Most attachments that I need; however, I must to put together a fantastic foundry to cast parts and equipment. I need more space in my shop,
I have talked so a couple of the forerunners in this quest who have serious desires in seeing this technology flourish.
Please get in touch with me if you have any documentation that is relevant.
Plasma Impulse Motor by Aaron Murakami, presents a novel way to power an inductor that appears to possibly have a reduced resistance/impedance effect in the entire circuit.
This may prove out to show how to get a stronger magnetic punch on a coil thereby increasing its power so we can have stronger motors for the same or less electricity.
It is also a 100% mirror image of the Gray Tube circuit, which is though by many to be THE Holy Grail of Free Energy since the output is astoundingly high compared to the input.
If the inductor’s impedance is being reduced, even a little, this is a very important discovery in electromagnetic science.
From Nanobubbles to Ball Lightning by Moray B. King – In an internal combustion engine the big anomalous energy manifests from microscopic ball lightning – not hydrogen combustion.
This presentation shows many resources and academic paper references that are involved with the latest research in this field. You will also learn how you may be able to make your own nanobubbles using various methods of cavitation to create what just may be microscopic ball lightning in your engine.
I've used the little foggers or cold mist devices in a water-mist ionizing device I made once.
However we use laboratory grade ultrasonic cleaners at work and the company "Soniclean" where they are locally made, is a minute or two walk away. I'm familiar with the ultrasonic ceramic transducers used in them, as I often visit their workshop when the cleaners require repairs.
Yes this is what I do, water is very important for life.
I think water is under fire, the rain brings in trash from
the jet stream. Chem Trail ionizing radionuclides bio weaponized
fiber wars, bio warfare using water to bond things.
I also have a 1500 watt ultrasonic head for my welder
that the probe has attachments for other things such as
stirring solutions. Or making emulsions but I never thought
much about breaking up the bonds this way until you
mentioned it.
My 1000 dollar distillation machine went down yesterday
all because the float lever seal began leaking. The pot is
crusty in about 4 weeks but if another process is used first
such as your idea maybe the paper filters will work better
to take out much much more.
Thanks in advance on the results of your findings.
It does what I need though. Will make 1 gallon at a time and that last me a while. I use it for all the battery top ups I do and for medical purposes.
I wipe the minerals out of the container after each use so will never have a build up there. Maybe some will make it to the coils - not sure, but it will definitely last long enough with my limited use of it.
I'm not necessarily looking at breaking the bonds, but wondering if it will change the bond angle. For example, if you can positively charge a water molecule, you change the bond angle to possibly a more obtuse angle because there are less electrons distributed to push the hydrogen closer together.
Just a thought if cavitating water changes anything like this or not.
Have it on my kitchen counter and have been running it on some water from my distiller. I put it in some plants to see if there is any difference - no controlled tests, but will do some with some bean sprouts or something.
I heard about some results with using cavitated water for various things and I want to verify if any of it is true with my own experience.
For sure, I'll use this cleaner to make myself some liposomal vitamin C but that actually isn't what I bought it for.
Just getting warmed up and seeing what anyone else has found out.
If you're just interested in repeatedly spamming about your water cell, that's not welcome. It's fine if you want to post something about your product like in your first post, but please introduce yourself and have a conversation or something and discuss why you think it's the highest efficient one on the market.
Hi Aaron, what ever happened to the September 24 Paul Babcock, Ethanol is Freedom release? Is it still going to come out?
Will the Bedini self-running motor video be available through some venue?
Thanks!
Paul's vid will come out. He and his brother are documenting the full setup including their boiler system, etc... once everything is a full package where it is basically a complete course, it will be released.
Tony Craddock has video rights to John's presentations right now so hopefully he will release it at some point. There was the self-runner and the Kromrey. Someone was there to film it for Craddock and I have no idea the release schedule.
Hello, I have just watched the THE LORD'S PUMP PROJECT video and read Wiseman's pdf and I have a question. Is this pump currently operating in Uganda? Is it lifting water over a 500 foot hill for the grandmas today? Or is it still in development?
Thanks
Garry
They have been working with the village for a while now but the pump is not installed. That is what Al is moving towards - the final version that will be installed. From the early prototypes, he has made a lot of progress in the last 2 years to what it is now and I believe the next build is the one to be installed over there.
That is a total of 15 videos from the 2015 Energy Science & Technology Conference. Vejlko Milkovic's is not an actual conference presentation and that will be offered for free on YouTube later. Both of John Bedini's presentations will be offered at some point through Energetic Productions and the other 12 videos will be offered by us through A & P Electronic Media.
The release schedule so far is as follows with the rest of the schedule coming soon:
August 3, Monday - Paul Babcock, Magnetic Energy Secrets Part 3
August 9, Sunday - Jim Murray, The Dynaflux Concept & Lenz's Law
August 15, Saturday - Eric Dollard, The Power of the Aether as Related to Music and Electricity
August 18, Tuesday - Jeane Manning, Panel Discussion - FREE VIDEO
August 19, Wednesday - Eric Dollard, Versor Algebra Volume 2 - Special Theories of Sequence Operators as Applied to Power Engineering
This is not a conference presentation - it is the second release of Eric Dollard's Versor Algebra book series.
August 25, Tuesday - Aaron Murakami, Plasma Ignition For Wasted Spark Ignition Engines
August 30, Sunday - Al Throckmorton, The Lord's Pump Project (HHO Water Pump)
September 4, Friday - Graham Gunderson, BOTH of Graham's presentations will be released simultaneously on the simple overunity transformer and on the VTA.
September 9, Wednesday - Douglas Lindstrom, ECE Unified Field Theory
September 14, Monday - Stephen P. McGreevy, On the Art of Natural VLF Radio Field Recording
September 19, Saturday, William Lyne, On the Parallel Propulsion Researches of Tesla and J. J. Thomson
September 24, Thursday, Paul Babcock, Ethanol is Freedom
Dr. Douglas Lindstrom spoke on the ECE Unified Field Theory - and amazingly, much was quite understandable to the layman. He did cover some mathematics but also covered many concepts involving overunity processes in cold fusion and even parametric oscillators, which are going to become more and more popular in this field. There are references to some of the parametric work and some has been replicated and verified. His presentation will also include a PDF of the PowerPoint with all the notes. Dr. Lindstrom works with Dr. Myron Evans - Tom Bearden considers him the most important physicist alive.
Al Throckmorton's presentation was very inspirational. This was a very rare appearance. Half of his presentation was really his story about who is he and much of his life experience, which was filled with priceless nuggets of wisdom. He had his special water gas pump, which is detonated with the plasma ignition circuit. We couldn't pump water with it since we were in doors, but he did fill up the chamber and detonated the gas and the pressure gauge was over 200 psi, which is way more than enough to pump a very substantial amount of water. We'll be including some diagrams and schematics for the pump so others see exactly what it is. The first application will be for small village use in Africa to pump water over long distances to improve the quality of their lives, which much of it is spent simply carrying water miles and miles from a remove water well.
Aaron Murakami (I) presented on the plasma ignition. Last year I spoke about the theory, operation, etc... with some demos. This year's talk was to specifically show how I overcame the issue of wasted spark ignition systems and how to put the plasma ignition on these ignitions, which are so common these days.
Paul Babcock presented on Ethanol, debunked a lot of the anti-ethanol propaganda that is so popular and showed some of the designs that he and his brother have developed, which make small scale ethanol production a breeze. Ethanol is freedom and you'll really learn why in this presentation. Ethanol is as good as cash or even better if you have a smart game plan and in these financially troublesome times, this information is priceless.
John Bedini showed his self-running motor - it was the first thing he showed me 16 years ago when we first met. It is really 3 machines in one and operates on one set of old 25+ year D cell alkaline batteries that are corroded, the springs in the battery holder are rusted out and the batteries are just taped in there. He spins the rotor and it starts off slow, turns a rotor with a propeller and blinks LEDs to show what phase the motor is in. By the end of John's talk, it is about 25-50% faster than it was in the beginning - not because it took that long to get to full speed but because it recharged its own running battery over the course of the presentation.
Graham Gunderson showed a simple transformer setup and demonstrated that it not only makes up its own losses, but actually produces a bit more. The overunity is small, but it is something he wanted to share with everyone because if you can't get to unity, you're not going to get to overunity. Since there is an obvious lack of enough replications of several overunity devices that many people are attempting, taking baby steps with this very simple transformer concept is absolutely necessary. Any builder with basic technical skills can make this transformer and by following Graham's instructions and references, they can achieve the same results.
William Lyne gave a fascinating comparison between some of the propulsion ideas of Tesla and J.J. Thomson. Eric Dollard was the one that actually suggested this topic since there are many gems inside of Occult Ether Physics by William Lyne. J.J. Thomson is one of the most important scientists to understanding not just the electrical sciences, but the real physics of the aether.
Paul Babcock's second presentation was on Magnetic Energy Secrets part 3 where he makes it VERY simple to understand what is necessary to create an overunity motor. He breaks it down to 3 very simple principles that almost anyone can understand. Paul covers multiple machines that have overunity results and shows how they are all adhering to these concepts. Back EMF is the bane of overunity and he shares the principles necessary to create a motor that does not generate - meaning there is simply no back emf!
Jim Murray presentation is crucial to the successful replication of his Dynaflux Alternator. Many who have tried to replicate it have failed. He shared the most important secret to understand to making it work as well as disclosing for the first time ever several pieces of information that were never disclosed in the patent. The patent has been expired for a long time now so it is public domain and he wants everyone to be able to understand what it is really about. The COP is over 2.5 on his laboratory bench model, which means it produces over 250% more electricity than it takes to run it.
Jeane Manning moderated this year's Panel Discussion, which included Eric Dollard, Al Throckmorton, Graham Gunderson, myself (Aaron), Jim Murray, Paul Babcock, William Lyne and Douglas Lindstrom. We discuss some common threads between different valid overunity technologies, the creative process and its importance, Graham and Eric discuss Tesla's patent which utilizes Cosmic Rays to charge capacitors to power loads and Eric gives some very clear specifics on this as he has replicated this in the past. There are multiple discussions about splitting water without electrolysis using electrostatics to rip the water apart without running current through it. Al Throckmorton's water fuel cell for the pump that he demonstrated does not use electrolysis to split the water, it is a water capacitor and it works incredibly well. I share one patent on this kind of process that I tried to duplicate in the past and Eric Dollard discusses his friend's work in this area who successfully mastered the electrostatic separation of water. Before we started the Panel Discussion, we gave recognition to the four Electrical Engineering students and two musicians who won the contests to have their conference and lodging costs covered by an Anonymous Donor.
Veljko Milkovic was not at the conference but his team was kind enough to provide us with a video compilation of quite a bit of his work. We played some of this during some of the breaks but did not have time to show the whole thing. Veljko Milkovic is the inventor of the popular 2-Stage Mechanical Oscillator, which produces many times more mechanical work that it takes to run the machine. This will be posted on YouTube at some point so everyone can watch it and learn more about his work.
Stephen P. McGreevy gave a very interesting talk on natural VLF radio recording. The Earth and atmosphere is constantly creating all kinds of music and other sounds, which are not audible to the human ear. Animals hear these sounds building up before an earthquake and that is how they know an earthquake is about to strike so they flee the area. Even if there is no natural disaster coming, these sounds are constantly around us. Stephen shows us many of the places where he traveled to record these sounds, he demonstrates the difference between the sounds and how different places sound different, various antenna methods to pick them up the best and anyone can get the receivers through his website so you can experience this as well. This is a fun and simple way, especially for children, to get in touch with the world around them. There are also schematics to build your own receiver that are open sourced on his site. This talk is highly related to Eric Dollard's Advanced Seismic Warning System.
John Polakowski did not make it to the conference so to replace his presentation, Graham Gundreson gave a one hour presentation and John Bedini followed up with a one hour presentation.
Graham Gunderson went into a lot of detail on his experience with Floyd Sweet's VTA (Vacuum Triode Amplifier) technology. Graham, John Bedini and one other individual has more experience experimenting with the VTA than probably everyone else combined. Graham spent 10-15 years on this nearly full time. The VTA used special barium ferrite magnets and the information that Graham shared about their special properties is rarely known by anyone in the "free energy" community. He discusses how they can be programmed to oscillate at very specific frequencies. Many of the REAL principles involved with the VTA are shared and Graham also shares about someone's work who replicated the VTA type concept using some Bedini SG circuits and barium ferrite magnets to charge the batteries in his electric car. This presentation is a must have for anyone that ever wanted to know what the VTA was really about. You'll also learn quite a bit about permanent magnets in general that is not widely known.
John Bedini surprised us again by demonstrating his Gravity Tuner circuit that measures activity in our spacial environment as well as demonstrating his famous Kromrey G-Field Generator. This was a shocking demonstration for most everyone at the conference because as it ran, the magnets turned cold instead of hot and when he lit bulbs with the output, it sped up. Also, shorting the output made the G-Field generator speed up and it demonstrated the pure white sparks, which are a phenomena of true negative energy circuits.
Eric P. Dollard finished the conference with a presentation that lasted almost 4 hours. If anyone can take multiple seemingly unrelated topics and tie them together with such mastery, it is Eric Dollard. He goes into the fact that J.J. Thompson is the key person when it comes to understanding the real aether physics, morphic fields and golden ratio archetypes all around us, concepts of levitation and musical harmonics and how the waveforms can tie together to give huge impulses that can catapult physical objects, science based on natural principles and how modern times has entered a new dark age with the current models that only serve to maintain ignorance about such principles and what direction we need to go to move back in the right direction. Eric goes into depth about Pythagorean mathematics and how it is key to understanding the natural science that is hidden in this day and age as well as much in depth discussion on various musical scales using the real Pythagorean ratios, which were accompanied with a few audio samples that were put together by Seattle Music Composer Charles Roland Berry. This allowed everyone to hear the difference between the ancient musical scales and today's common scale. Eric even covers a fair amount about Gustav LeBon and covers many comparisons showing the mirror images between some of the music of Bach and polyphase power systems with many examples using his Versor Algebra diagrams. Needless to say, anyone that does not understand the relationship between music and electricity after watching this presentation has not been paying attention. In the end, Eric summarizes this presentation with an in depth discussion of the physics of the aether based on the work of J. J. Thomson including the mathematical equations of the aether that nobody else has been able to figure out because J. J. Thomson convoluted so much of it in his own writings because he never kept a continuity between different mathematical variables so it has always been confusing. If anyone can straighten out this mess, it is Eric Dollard and that is exactly what he has done so for the first time ever, you will be able to see as clearly as possible based on what is in J. J. Thomson's work what he was really after. This presentation is THE definitive lecture on J. J. Thomson and the true physics of the aether.
As requested to Aaron.. Please post also you the video..
A video of that was shown as part of my presentation at the 2014 conference. The demo of that jet was given to a couple angel funders. I might put that segment on youtube at a later time. It is about 8 minutes long and was never intended to be shown to the public.
Ditto on the catalyst comment Dog-One - if there is one significant thing like that left out...
If they use plasma ignition on the generator, they can lean it out even more.
My jet engine runs on tap water with a small trace amount of propane and that is without even using HHO on it yet. I began with 8psi of a certain flow rate of propane to run it and by the time I was done with exhaust recycling, plasma, etc..., the propane psi gauge is at 0 psi because it uses so little that gauge can't read it. My guess is about 90% tap water and about 10% propane if even that much.
Mark McKay was kind enough to give me a couple flow meters that look accurate enough to measure the actual flow at that low level so I'll measure it when I have time, but cutting it from 8psi to 0psi (on the gauge) is quite a cut.
The jet runs so efficiently, I can put my hand about 3 feet from the exhaust and keep it there it is so cool running.
CDI Question - Does anyone know who makes a CDI that is only a SINGLE discharge per trigger? All I can find anymore is all the multiple spark discharge models. I need a single event per trigger. Thanks!
Last year, John Bedini showed his famous Bedini SSG, but with a modification. As the output battery charged up, SO THE THE INPUT BATTERY! The wheel was just spinning away and BOTH batteries were charged. That is what you get to see at the Energy Science & Technology Conferences.
