webmug

Also a merry Christmas and a happy new year to you all!
I hope we have a major breakthrough in 2011!

br,
Webmug

Steve, in my opinion your have the right answer. The H2O is converted to HHO so the capacitor (dielectric properties are altered).
When this happens the voltage drops at the plates (less charge)
The gate operation lets the capacitor restore it's charge capacity.

What I have seen in my first test is that the voltage is max when GATE duty and frequency was adjusted for max potential development (step-charge).
The PULSE frequency is the frequency on the chokes (coils) and wfc when max. amp restriction is occurring.
The gate reduces also current going into the primary coil.

But hey, it's my guess. We must still experiment further on the real thing.

br,
Webmug

For a long time this resonance term has been on my mind.

Has anyone come up with the following term what Stan meant, "tuning into the dielectric properties of water" = "parametric exciting"
http://encyclopedia2.thefreedictionary.com/Parametric+Excitation+and+Amplification+of+Electromagnetic
http://jnaudin.free.fr/wfc/index.htm
http://jnaudin.free.fr/html/paraintr.htm

When you set the LC resonance with PULSE frequency (natural frequency) we get high voltage. If amps are being restricted we are separating water, so capacitance is changing (dielectric between the plates) at the rate we are sending the PULSES. The LC resonance will be tuned (locked) by the PLL, but if we use GATE frequency for amplification of the natural resonance in the WFC on the rate the capacitance is changing we are getting parametric amplification of the natural LC resonance.

Just a thought.

br,
Webmug

I recommend everyone to start reading into puharich his document. It is based on Keely!

There is no current involved only voltage and the right frequencies to make this SM resonance WFC system work!

Br,
Webmug

THE ELECTRICITY MAP: "Static" Electricity versus "Current" Electricity
http://amasci.com/miscon/ele-map.html
Look left bottom in figure CURRENT vs VOLTAGE: "molecular bondings (<<100nA and <<10V)"

The Electrostatic Charge of a Capacitor
http://www.wisc-online.com/objects/ViewObject.aspx?ID=ACE11805

"STATIC ELECTRICITY" MISCONCEPTIONS
http://amasci.com/emotor/stmiscon.html

"CAPACITOR COMPLAINTS"
http://amasci.com/emotor/cap1.html

HOW ARE WATTS, OHMS, AMPS, AND VOLTS RELATED?
http://amasci.com/elect/vwatt1.html

Br,
Webmug

Follow this link: http://www.chipdip.ru/product0/44265.aspx (Russian seller of electronic components).
It's just a ferrite plates (20х3х115mm) that I cut and then glued as I have. Very simple task if you have a dremel 
Here is a link to this amazing tools site: http://www.dremeleurope.com

Do you think NiZn ferrite 400HH is good material? Also check ebay for [FERRITE BARS]
The only shape/type I could find are 400HH plates.
http://www.ionizationx.com/index.php/topic,1305.msg21636.html#msg21636

Br,
Webmug

Hi everyone,

Just wanted to share that I was able to get the pulse doubling effect using my 5 coil VIC and VIC driver.
Although I am getting the doubling it's not exactly as Meyer's shows. The problem I am having is the pulse lengths on the secondary side of the circuit are much shorter than the primary pulse lengths. So the doubled pulses are not meshing together as they should. I think this is due to the impedances not being matched and too little current flowing through the circuit.

What is interesting to see though is the pulse doubling reduces the capacitors voltage drop between pulses. When the double frequency pulses mesh together as intended the capacitor voltage drop between pulses is minimized. This allows the cap to charge to a high voltage will the least loss in the shortest amount of time.

http://www.youtube.com/watch?v=QRDD1yreOSQ&feature=plcp
http://www.youtube.com/watch?v=ysY_oDMfayo&feature=plcp

I see you're using crocodile clamp cables for connecting the transformer.
Use them carefully because they have lots of capacitance. If you tune for SRF resonance at the chokes your cable is interfering big time!
I noticed when touching my cables connecting the WFC ,amplitude drops. PLL should be handy. 

But I'm afraid sebosfato said it right about the pulse doubling effect. 

Feel free to post ideas!
http://www.ionizationx.com/index.php/topic,2474.0.html

Br,
Webmug

Meyers always stated that the whole package of patents together are telling the truth on how to run a car on water.
That was the only way to do so, because otherwise he wouldnt get the patents in the first place......

So, look at all patents. Look at the order in which it was written down.

I think the name of the buggy was a great hint! Solar water car........
Memo WFC 424 explains the solar part, from my point of view.
Everybody is working on VIC's, but the basis starts with the proton energizing process of the waterbath.
If you look carefull on the Dynodon picture of the waterfuelcell and look into the white bucket with all tubes in there, you also see room for a device in the middle of it.
You fill in the blancs......


Steve

Hey Steve,

That's just the collector space for waste particles falling to the bottom in the water tank reservoir. Think not?


Br,
Webmug

Who built the gated pulse gen like in the patent or like Tony and worked?I tried bouth crkts on breadboard and pcb and none of them worked....

http://www.ionizationx.com/index.php/topic,2523.msg23643.html#msg23643
Check if you have version 1 pcb of Tony.

Regards

Allthough i have been mostly observing, reading and learning on this forum for the last months, i also have started to design, simulate and build my own wfc. Since i have a background in electronics and computer science i decided to base my system on a microchip PIC processor. I think that by using  a micro processor you not only reduce the part count it also greatly improves the possibilities to test and debug your wfc since i am able to change parameters or even the entire configuration with in system programing in very little time from software instead of changing entire electronic circuits. I hope to show some early results soon ..... (why doesn't a day have more than 24 hours  )

That's great Sharky, looking forward for your results.
 
What is your solution for a PLL function in the controller with electronics and computer science background?
Are you clocking the PIC clock dynamically or do you use Software PLL (ADC/DAC) solution. Should be (0Hz - 20kHz) range.
My idea is to build a 12bit SPLL using a ADC or PULSE counter to generate GATED PULSE signal from the DAC on a STM32 SoC.
I don't know if a microcontroller could do 0.01Hz or 0.001Hz steps accuracy for resonance PULSE adjustments.
Maybe a FPGA chip could be handy?

It would be great if you also use a SPPL or have other solutions.

br,
Webmug

Quote from: webmug on February 23, 2010, 15:59:15 pm

You can use a one phase freq regulator to a three phase motor like I've used in my setup:
http://www.ionizationx.com/index.php/topic,1074.0.html
Works great and uses less energy because its only using that much energy to keep the rpms stable.

Looks interesting , can you buy them off the shelf ?

Yes! I use a "Schneider Electric Altivar 12"   ATV12HU15M2



http://www.schneider-electric.com/sites/corporate/en/products-services/automation-control/products-offer/range-presentation.page?c_filepath=/templatedata/Offer_Presentation/3_Range_Datasheet/data/en/shared/automation_and_control/altivar_12.xml

See my version: http://www.ionizationx.com/index.php?action=dlattach;topic=1074.0;attach=4236

The motor is purely for testing purposes , i will be using the setup on a car . I know single phase motors are not the best . There is a way of using a three phase motor on a single phase using caps ....

You can use a one phase freq regulator to a three phase motor like I've used in my setup:
http://www.ionizationx.com/index.php/topic,1074.0.html
Works great and uses less energy because its only using that much energy to keep the rpms stable.