Steve

I just want to jump in here...
The most convient way of raising resistance is to create first the milkey water filled with hho.
That means that you have a 2 step proces.
1. create with electrolysis a milkey waterbath.
2. after that, raise the voltage up. The amps stay low.

Thats what Meyer did, i think.

His brother called it the cell with little explosions.
Which i can understand as i also did a test with low voltage and high voltage in a 50 50 arrangement.
The high voltage thru a cell with a milkey hho cloud is actually very DANGEROUS.
My cell exploded......
Water filled with hho is actually very conductive...

just something to think about...

but maybe we are all wrong here and we should listen to good old Bob Boyce and setup a pulsing system that collects power from the aether

just my two cents on this technology is that the wfc always returns some voltage / current, when you switch the power off.
It acts a bit as a capacitor.
If you can pick up that charge then your second pulse will be maximum twice the voltage as then your powersupply is giving...

Go have a look!

well, my current view on that part is:
Herman clearly said that the spark system was not in the cell.
So, the corona wires cannot have been in the water at all. Just the two electrodes. I tried.
I almost blew myself to heaven.
The corona wire, the spark system and the magnetisme are related, as well as the current flow thru the watercell.
Both parts create a magnetic field.
If you put current on an cable, you create a magnetic field.
So, i think that the basic part of 7 hz pulsing thru the cell was creating a magnetic field in the electrodes.
The other part with the corona wire and spark is also creating a magnetic field, as soon as the spark occurs.
I high current will flow thru the wires, shortly.
If you wrap that corona wire around the drum, that magnetic field will influence the water/gas.
Just have to figure out the polarity, but that is easy tested.....

I hope to have add something to the thought process, Kevin 
Hope you find some time to re start the whole thing.
Do you think Herman was also injecting waterdrops in the cylinders?

cheers

The good thing is that the available lasers are way more powerfull then at the time Meyer was working on this...
If you make a shiny spherical cell, then you should be able to run some tests and see if the gas is powerfull that comes out or maybe the cell is more energy efficient.

My 2 cents.

I always thought that the epg was powerd by the pressure of the produced hho gas....


Cheers

Interesting

I ran some tests with an hydrogen generator in a lab in the Netherlands.
Costed me a lot, but the results where unpayable :-)

The materials are the biggest issue.
Copper slag is a waistproduct?

From which country are you, if i may ask?

Steve

Bob used 3 frequencys, yes.
The bob setup in a couple of words:
He used a bias DC voltage of 1.3v a constant strait DC.
The pulses of the three frequencies are very very short pulses. The theory is to use non herzian charges.
These scalar waves are very good in charging water....

cheers

Helium is concentrated in stars, where it is synthesized from hydrogen by nuclear fusion......

The nucleus of every helium atom contains two protons, but, as is the case with all elements, isotopes of helium exist. The known isotopes of helium contain from one to six neutrons, so their mass numbers range from three to eight. Of these six isotopes, only those with mass numbers of three (helium-3, or 3He) and four (helium-4, or 4He) are stable; all the others are radioactive, decaying very rapidly into other substances.


As Anderson clearly stated, Neutrons neutrons and neutrons....
He added neutrons to the hydrogen to create an isotope...deuterium....
However helium with two protons and neutrons are also possible...

As i start thinking..is shooting a photon from the gas also some kind of extracting?

Anderson and friends did create rf radiation by using a spark. A car ignition coil of 70kv discharging into a sparkplug, but the sparkplu wire was wrapped around the cell.....
Feeding the rf into the cell.
I have not found any info on extracting that rf out of the cell.
The only info on extracting a charge is from Stan Meyer,s EEC.

Nature is never so exact...it might have given some good reactions....
Yr new system might have been a more developed system.
As Anderson said, he needed soft x rays...photonic energy....feeding it into the watercell.

Yr new system started to produce photons as well, is it? Rf made the H glow....photons

Hmmmm
Some stuf to think about

Extracted? Like when you have resonance between a coil and capacitor and then specific when the coil charge flows towards the capacitor?
There should be a collapsing magnetic field then, is it?

Can you draw how you think the coils are wrapped?
A resonance between what parts?

Sorry, I forgot which thread this subject was originally discussed on.    He had a sealed glass sample tube - around one inch by three or four inches - of USP grade Hydrogen.  He had an rf Helicon coil wrapped around the tube, and energy from this coil converted the internal gas into plasma.  This had a bright red appearance.  During the several minutes of operation, the color gradually changed to purple (red plus blue), which indicated the formation, and presence of, Helium, inside the sealed tube.  He said this was due to spontaneous fusing of H into He.  And this happened because he had a second coil loosely wrapped around the outside of everything else, with this coil resonating at a specific frequency.  The fact that this secondary tank circuit would 'ground' the fusion energy is what allowed the reaction to occur.

He also said that he was informed during an official visit that he had stumbled onto a state secret.  (In England).   He did not say he was ordered to not talk about it.

During our entire discussion at the private group, he never would say what the extraction frequency is, but this might be deduced by examining his equipment.  The outer pick-up coil's inductance would be easy to estimate, but the tank's capacitor was around 10" in diameter, with a vacuum dielectric, and a large number of plates.  So what was it's value?  He wouldn't say.

In my opinion, his demonstration proved that fusion isotopes can form spontaneously when the right frequency of energy is EXTRACTED from a plasma, rather than input.  So the only input which is needed is for ionization.

A state secret.....
Thanks for explaining, ET.
It is highly intresting. I am curious if that technology works with in an ambient environment where the gas flows thru a glas tube and not in a ststionairy closed tube.

Can you post his posts here or at least the pics?
And did he use any modulation on that signal? Am or fm type?

https://nanoconvergencejournal.springeropen.com/articles/10.1186/s40580-021-00254-x

more electrodes:

https://www.ebay.de/itm/174906072199?hash=item28b936dc87:g:I74AAOSwfwphJGbd

electrodes for sale:
https://www.ebay.de/itm/174235107036?hash=item289138bedc:g:nGcAAOSwzRlegUs0

Voltage normally used in electrolysis is a minimum of 1.23v
With this electrode, it is 1.07v.....

Researches on electrolysis have attracted great attentions in recent years as a promising technology to convert renewable energy into chemical energy, and many studies on water electrolysis, (1,2) CO2 electroreduction, (3−5) N2 electroreduction, (6,7) and so on (8−13) are addressed to develop a sustainable society. Electricity derived from renewable energy can be used directly to operate these electrolyzers. In addition, the rates of electrochemical reactions would be easily controlled by the electrolysis current in accordance with the energy supply situation; therefore, electrolyzers can follow daily and seasonal fluctuation of renewable energy unlike the conventional thermal reactions. In recent years, it is known that electrohydrogenation of toluene (TL) to methylcyclohexane (MCH) is one of the promising technology as the hydrogenation process in an organic hydride hydrogen storage system. (14−32) Water is oxidized on an anode (eq 1), and TL is reduced to MCH with electrons and protons on a cathode (eq 2) which is widely known as a transportable hydrogen carrier. (33−36) As presented by eq 3, the theoretical electrolysis voltage of the reaction (1.07 V) is lower than that of the water electrolysis (1.23 V). Thus, the direct electrohydrogenation process has significant advantages in energy conversion efficiency for the hydrogenation of TL to MCH to compare with a conventional 2-step hydrogenation process, which consists of the water electrolysis and the catalytic hydrogenation of TL. (16) In accordance with the demand of energy, hydrogen is extracted by a catalytic dehydrogenation of MCH to TL and used as an energy source. (33−36)
source:
https://pubs.acs.org/doi/10.1021/acsomega.9b03757#

Stepherson showed us the isotopes form spontaneously when the USP gas container is placed at the center of the air core rf transformer.  Perhaps you can pull electricity from the resonant circuit as it's being produced.  Using the visible size of his pickup coil (the larger, secondary winding) and estimating the vacuum capacitor value would resolve the fusion operating frequency.

This is a very important quote from you, E-tec..At least for me...." Stepherson showed us the isotopes form spontaneously when the USP gas container is placed at the center of the air core rf transformer."

Stephen Horvarth and Herman Anderson both used sparks to create rf radiation......
Both claimed to create isotopes...

Do you have more info from this Stepherson,s system?


cheers!