Skip to content
Stan’s Legacy

Figure (2-3)

Gas Mixing Regulator

Also written Water Inlet Housing

How it is written

  • (2-3)

Drawings 2

Where it is named · 5

Gas Mixing Regulator

  1. ... sustaining and maintaining an Open-Air Flame beyond 5000-degrees F, as illustrated in Figure (2-3)

    Read it there →

Flame Temperature Adjustment

  1. By capturing and recycling the expelled non-combustible gas (D) (derived from and supplied by the water bath) back into the sustained hydrogen gas-flame or Fuel-Cell causes the gas-flame temperature to be "changed" or "altered" by way of the Gas Retarding Process, as illustrated in Figure (2-4) as to Figure (2-3).

    Read it there →

  2. Figure (2-3)

    Read it there →

Quenching Circuit

  1. Spark-Ignition of the Fuel-Cell gases (B/D) is prevented when the "Gas Retarding Process" is used in conjunction with a "Quenching Circuit", as illustrated in Figure (2-3), (2-4), (2-5) and (2-6).

    Read it there →

Quenching Nozzle

  1. Figure (2-3)

    Read it there →