kinesisfilms

"Some bifilars have adjacent coils in which the convolutions are arranged so that the potential difference is magnified (i.e., the current flows in same parallel direction). The magnetic field created by one winding is multiplied with that created by the other, resulting in a greater net magnetic field. Others are wound so that the current flows in opposite directions. The magnetic field created by one winding is therefore equal and opposite to that created by the other, resulting in a net magnetic field of zero (i.e., neutralizing any negative effects in the coil). In electrical terms, this means that the self-inductance of the coil is zero."

"An early example of the bifilar coil can be seen in Nikola Tesla's United States patent 512,340 of 1894. Tesla explains that in some applications (which he does not specify) the self-inductance of a conventional coil is undesired and has to be neutralised by adding external capacitors. The bifilar coil in this configuration has increased self-capacitance, thereby saving the cost of the capacitors. It is notable that this is not the kind of bifilar winding used in non-inductive wirewound resistors where the windings are wired anti-series to null out self-inductance."

yes i have also had no success also....it's not that simple.

i think it has to do with producing the double pulse.....the frequency of the double pulse production .

tomorrow i will have johns coil and will try the last bifilar connection.

i always have my fingers crossed.

i seem to have the same problems demartin faces with the 2 different connections.......so it is narrowing down very precisely.

???no comments on your new posts?

haha your right but i know what you mean

that 1hz pulse is very looong.

but you get the concept.

hell yeah! exactly!

and that is what pulses the primary!

thank you electrojolt for helping me.....i kept visualizing hertz although it is in kilohertz......this is reflected in my drawing.

thank you very much i appreciate it.

Quote from: kinesisfilms on May 03, 2009, 02:04:45 am

so if he is using a wave then the reason for gating would make sense...... i am seeing it as a 5 thousand cycles a second meanin one positive pulse and one negative pulse....(a cycle)......super imposing a half hertz gating signal will then create a 2500 UNIPOLAR pulses with a 50% duty cycle since the gating switches off on the negative half of the cycle....he uses the word discrete which means seperate so 2,500 seperate pulses.......interesting.

any comments on this electrojolt?

-----> Well, by using a .5 Hz Gating on a 5Khz pulsing, that means the circuit will be pulsing 5Khz for  1 second, and during that one second, there will be 2500 On pulses.

alright so let me clear this up here.....so there are 5,000 cycles a second but the gating is half a cycle a second (let's say the negative half of the cycle) so there will be then 2,500 cycles in between every half cycle of nothing.

so then if meyers is using pulses as input then there are 2,500 on pulses with 50 percent duty cycle for half of the cycle and the other half of the cycle is off.


sooo:   _________2500 with 50% duty cycle_________2500 50% duty cycle_________2500 50% duty cycle

and the above image would be 3 full cycles.

and that is what is going into the primary....and that IS the gated cycle......i kept confusing myself with visualizing hertz although it is kilohertz.


so my drawing is terribly confusing seeing that i simplfied it down to 3 hertz when in reality there are 15,000 cycles going on in that drawing.

oh and the images below actually only show 3hz...but just pretend they are 5khz.

(http://i2.photobucket.com/albums/y2/kinesisfilms/pulses1.jpg)
(http://i2.photobucket.com/albums/y2/kinesisfilms/pulses2.jpg)

a very good statement
(http://i2.photobucket.com/albums/y2/kinesisfilms/hiitspermolecule.jpg)

so basically everything comes down to the coils resonant frequency....the coils resonant pulse in this case would be the 2,500 input pulses which would turn into the 5,000 pulses.

the resonant frequency would be the 8 times a second over all pulse.....that is resonance between the inductor and capacitor.

no your are correct in your drawings but that is not what is happening.....yes that can happen.....but that is not what is happening.....the signal isn't rounded....make it square so the amplitude is constant and that would be the input wave into the vic primary....i am scanning the images.

ha no that is wrong.

i will draw what i am talking about.

you cannot take a small frequency and make it a larger frequency....IE 4 hz pulse and make it a 16khz pulse.

you can take a large frequency.....like in the tesla coil video a frequency of 135,000 hz and by pulsing it on and off (GATING) you can create audio waves which are in the range of 20HZ to 20,000HZ that entire range is much much smaller then the coils resonant frequency so YES.

YOU CAN TAKE A HIGHFREQUENCY AND GATE IT TO A VERY SMALL ONE....BUT NOT A LOW FREQUENCY AND GATE IT TO A HIGH FREQUENCY....that cannot be done.

that is how they got the tesla coil above audio frequency range to work with the bass guitar's very very low audio range.

each pulse would not have a different amplitude if you are switching it on and off.....it works like a square wave.....if you faded in and faded out the pulses like a sine wave then yes each pulse would have a different amplitude.

but in meyers work he takes a unipolar pulse (which is basically unfiltered dc pulsed on and off to make a square wave) and then gates that with a much larger square wave. IE switching instantly on and instantly off GATING.

i can draw this if you still can't see it.....the radio works exactly like this....this is frequency modulation or FM......where AM is amplitude modulation.....and meyers technology uses both (in a sense)

wow you can gate a 120 Hz frequency and get 500 Hz out?

that is interesting and useful knowledge

aghh no i meant to write "let's say...."  sorry.

but yes you can just like in the tesla coil where they turned the 135khz resonant frequency into audio! (20HZ-22KHZ)

that is correct and relevant....now in stans older work he full wave rectifies the signal from let's say 60 hz ^v^v^v to _^|^|^|^|^|^_ making it 120 hz or twice the original frequency and now it is unfiltered DCthen he gates that signal for his lc resonance....the gating of that signal on and off might make the overall signal let's say 500hz......it depends on the L and C.


in his more recent work he uses single unipolar pulses let's say 60 pulses a second_^_^_^_^_ (sort of like ac but unipolar this can be accomplished on a signal generator with a dc offset or a pulse mode).....are sent into the bifilar inductor and the emf release produces _^|^|^|^|^|^_ 120 pulses a second or at this point unfiltered DC becuase of the diode and it's direction....that signal is then gated for LC resonance.

but you are correct.

so if he is using a wave then the reason for gating would make sense...... i am seeing it as a 5 thousand cycles a second meanin one positive pulse and one negative pulse....(a cycle)......super imposing a half hertz gating signal will then create a 2500 UNIPOLAR pulses with a 50% duty cycle since the gating switches off on the negative half of the cycle....he uses the word discrete which means seperate so 2,500 seperate pulses.......interesting.

any comments on this electrojolt?

i hope this is correct.

but if that is the case then that is still not gated....ugh......so then the 2,500 unipolar pulses with a 50% duty cycle would now enter the inductor and once passing the inductor it would be doubled with a frequency of 5,000 unipolar (double) pulses would enter the water cavity.

then i think those pulses are switched on and off......this creates the pulse train......the on and off switching is the LC resonant frequency.

each patent he has a new way of explaining it......it is always the same situation though.....just like what is going on in the video  the coil has a resonant frequency of 135khz but they make audio waves by gating it anywhere from 20hz to 22khz.......just like andrija puharich said......even in meyers older patents he uses unfiltered dc which are pulses then gates the pulses!.....now we are creating unfiltered dc from a 50 percent duty cycle pulse and then gating the unfiltered dc to make pulse trains.

so this is a huge part to it.......THERE ARE 2 RESONANT FREQUENCIES.....A RESONANT PULSE AND A LC RESONANCE.

and i like the statement from WO 92/07861 "Also, at a resonant condition harmonic effects occur."....i can only imagine what will begin to happen on the step charging and decay times of the wfc....almost like a sustained ringing inside the tubes....not a physical ringing but an energetic one.....so the cell will be doing plenty of work on the gated off pulses as the enrgy is dissipated into the cell thus you need half the energy to do twice the work.

this technology is simply amazing.

nice i have scanned and posted the page on charging chokes from that book that he refers to a while back.......
http://www.ionizationx.com/index.php/topic,683.msg6550.html#msg6550

Tom Valone used to work for the patent office and has started many future energy conferences and magazines.

He speaks around 24 minutes into the video about stanley meyer and what stan told him....another damn good and lucky find!

http://www.consciousmedianetwork.com/members/tvalone.htm

yeah i will eventually go that route......but for now i just use my function generator which has an amplitude of up to 20 volts and a mosfet to provide my power.....it works well.

i can guarantee that it iis in with all the boxes and the rest of stans collection that that one guy is in possession of.

ctrl F will allow you to search.....

"Note, the claim by Stan Meyer about his acoustic spark plug, idea stolen from Dale Pond 6 years before, see; Doctor X Experiment."

the phase conjugate and stanley meyer are not related in this article......they both appear on that page but have no realtion to each other.