Faraday88

heysoundude wrote:

The few times I've met with George Wiseman of Eagle Research, he has encouraged me to extend my fuel efficiency gains with water injection. Water injection before HHO is what he encouraged me to try, but I haven't yet gotten to it. I can't say why, when I was (and am!) clearly willing to buy an electrolyzer from him, but he is quiet to the point of cryptic in sharing what he knows which I interpret as encouragement to study more and learn more so that you can be on his level in a discussion.

AMPPMEUPP wrote:

Stan Meyer took his secrets with him and I once read that the Arab Oil Producers offered 1 BILLION in cash for his patents(s) and that tells you that it did what he said. Of course he refused and was most likely taken out after that with the heart attack device they tried to use on Tom Bearden.

I think the Meyer invention had a small window of opportunity and was complicated to get it right and I also believe this about the John Searle device. It seems that Mr. John Bedini has given us a much larger window for success and a less complicated learning curve, that can also help those interested in building a Brown's Gas generator that is way over 1 COP or even burning water as Stan Meyer did. Last time I checked a car still has a primary and secondary coil system to fire the spark plugs!!!

We shall be finding out as we all progress forward.

Richard.

IonStatic wrote:

Wah very good info..

Aaron Murakami wrote:

I haven't experimented with this exact concept but I recall talking to "Tutanka" about it years ago. The UV seemed to have a very narrow window to work.

This looks like someone trying to utilize this concept in an engine - not sure what progress they've made so far:

https://www.facebook.com/photo.php?f...type=3&theater

Aaron Murakami wrote:

That's very interesting!

Can you give the exact protocols you used to do this experiment?

A full video of the entire process would be very helpful. I downloaded the paper, but a video walk through of your particular experiment would be valuable.

Are you one of the writers and experiments of the paper?

tree Of Meraki wrote:

https://www.researchgate.net/publica...4uWRObOhNZBcJw

Using this process to dissociate water with sodium chloride electrolyte and 10-25% NaOH or KOH mixture would catalyze the sodium ion to be transverse between the chloride and OH group. Rendering the chlorine to bubble off with greater redox flow than normally witnessed. The benefit of this is the photochemical reaction of Hydrogen with Chlorine gas. If the HHO stream is passed through an electron extraction mesh electrode, the resultant gas can be subjected to UV light and cause the spontaneous photoelectrochemical reaction between Chlorine and Hydrogen. Roughly 14 times the combustive force than gasoline of equal volume.

see here:

With water injection into the exhaust all chlorine radical can be purified out of the exhaust stream.

tree Of Meraki wrote:

https://www.researchgate.net/publica...1MBbptQ70U9mt0

This is essentially just creating a optical oscillator and putting conductive ions in the path of the oscillating wave. In theory by using high voltage pulsed current would be more effective than constant current or AC.

What do you think?

tree Of Meraki wrote:

https://www.researchgate.net/publica...4uWRObOhNZBcJw

Using this process to dissociate water with sodium chloride electrolyte and 10-25% NaOH or KOH mixture would catalyze the sodium ion to be transverse between the chloride and OH group. Rendering the chlorine to bubble off with greater redox flow than normally witnessed. The benefit of this is the photochemical reaction of Hydrogen with Chlorine gas. If the HHO stream is passed through an electron extraction mesh electrode, the resultant gas can be subjected to UV light and cause the spontaneous photoelectrochemical reaction between Chlorine and Hydrogen. Roughly 14 times the combustive force than gasoline of equal volume.

see here:

With water injection into the exhaust all chlorine radical can be purified out of the exhaust stream.

Georg Seema wrote:

Yesterday I started converting one of my lead batteries with magnesium sulfate (Epsom salt). I'll post here when it is done and how it turned out...

tree Of Meraki wrote:

The two switches are because the thyristor is necessary to carry high current loads into the coil primary, while the FET acts as a gate switch for application of a current frequency. By increasing the frequency that the FET is triggered the current applied to the coil increases. While the Thyristor simply carries the high current load and keeps the pulse width within 300nano-seconds

tree Of Meraki wrote:

[ATTACH=CONFIG]7136[/ATTACH][ATTACH=CONFIG]7137[/ATTACH][ATTACH=CONFIG]7138[/ATTACH]

Circuit for High Frequency Ultra-short Pulse Width DC Voltrlysis. Where the decomposition of the water molecule is the result of HF Virtual break down in a resonant-step-charged capacitor. The resulting gas can be used as seen fit. The overall circuit will maintain it's efficiency even as applied current is increased. This cell system is designed to operate high efficiency, low power consumption and consolidate storage, purification, and pressurization requirements within one device. (This only only for the version of this device where special metal alloys are used at the negative electrode. Standard HHO gas can be created otherwise).

Normal water would work in this setup, any water would work. Normal, sea, urine, rain, waste water, etc etc. This circuit prevents the Electron Double Layer and Electron Diffusion Layers from forming, which prevents brute-forcing and instead allows for Virtual breakdown

For circuit estimations, the total current moving through the circuit will be maximum 350W generally 12V @1-6amps depending on how many "cells" are connected to the power supply.

For device design, i'd go more for germanium diodes, a Static Induction Thyristor, and a standard FET fit for the current you plan on running through the circuit. For coil winding numbers i gave give you theoretical values for each coil that would suit as good starting points.

Primary can have between 1-560 turns
C2: (@P=560) 2,880 turns
C1:3,000 turns
S:3,020 turns.

The voltage and circuit resonance can be changed based on the turn relationships, and the applied frequency. the Pulse Width is 300ns but the pulse frequency is between 2-25Khz up to 40+Khz. The circuit is experimental, so the values are completely open to be seen. I know what the theory says is an appropriate starting point, but who knows how the circuit will behave once built.

What do you think?

Richard wrote:

T. T. Brown's 1965 patent copy that I have shows high voltage DC.
Would you be so kind as to show us yours plans or recommend a source?

wrtner wrote:

Interesting, but what is the address?

PaBloM wrote:

What i don't understand why in some places we can find a comments of Tom Bearden like he is a desinfo.

Bung-ee wrote:

Hi Tom C, all contributors, I'm taking Peter Lindeman's forum topics for two reasons :
- 1st, I learned a lot from his video about the electrical motors, his article about colloidal silver which allowed me to kick start on this before discovering Robert C. Beck and even clarifying the purity of silver question;
- 2nd, the heat application that can be used from what follows, since this is related to Peter's saving home energy ebooks he sells;
- 3rd the OU.

I have the pleasure to let you know that a great inventor, by the name of Jean-Christophe Dumas, has released , april 2014 in public, the secret of a non-patent mechanism of instant water boiling (less than 10 seconds) with a 500-600 watts input.
The effect has been expertised by independant researchers as authentic and demonstrating a 116 percent Over unity efficicency.
Two immediate applications :
- Potential Cheapest home heater
- Water desalinizer of unprecedented efficiency.

I am currently building one such machine , quick, easy, and not dangerous.

A collective association of researchers have built up around the inventor to deliver this to the world, for free.
They call it revolution, I do so too.

The facebook page

Log into Facebook

https://www.facebook.com/pages/Effet-Dumas-Energie-libre/270688943092791?fref=nf

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

the inventor's home page

http://www.effetdumas.org/

youtube presentation of the principle :

https://www.youtube.com/watch?v=VFVRhfm0pSI

https://www.youtube.com/watch?v=VFVRhfm0pSI

https://www.youtube.com/watch?v=UT36PaqqfTU

https://www.youtube.com/watch?v=UT36PaqqfTU

two inventor's interviews:

https://www.youtube.com/watch?v=pbGnX2GSsAM

https://www.youtube.com/watch?v=pbGnX2GSsAM

https://www.youtube.com/watch?v=e9xEgDyhv4A

https://www.youtube.com/watch?v=e9xEgDyhv4A

This has been reported in the local newspapers, and aired on the TV regional.
Most, the OU has been independently measured and observed.

The effect has been named the Dumas bowl or the Dumas effect and is related directly as per assumptions to Pr. Casimir 's effect.

It is also similar looking to Peter Davey's machine, for some of it's specifications.

This is a , IMHO, 100 percent hoax free research project you can step in right now.

Have a lot of luck and let's share results as soon as the first replications will start !

Have a gr8888 day !!

Allen R. wrote:

Your welcome! I really hate it when things disappear like that. For some reason I'm not remembering a Stan Meyer documentary but if there is one it is probably somewhere on youtube or vimeo.

al

Allen R. wrote:

Hi all. Since the movie Newman has disappered I decided to go find it. Use an adblocker. I'd also suggest grabing it with a video grabber just in case it goes away.

http://1movies.tv/film/newman-2015/

al

Aaron Murakami wrote:

Joseph Newman is a legend in the Free Energy field and is one of the pioneers of the movement. Geoffrey Miller of Energy Bat Labs worked with Newman for about 10 years in the last 80’s and early 90’s and is one of the few people that ever gained Newman’s trust.

Geoffrey was the one who helped guide Newman’s Energy Machine construction so that they developed more torque and were simply built better. Newman was not much of a builder but more of an intellect.
Newman died of a heart attack about a year ago but his secrets will not go with him. Geoffrey Miller will be giving an exclusive disclosure at the upcoming 2017 Energy Science & Technology Conference and will show the CORRECT way to build a Newman Machine.

FULL YOUTUBE INTERVIEW AT BOTTOM OF THIS POST: Joseph Newman's Secret Disclosure Coming by Geoffrey Miller - A & P Electronic Media

Aaron Murakami wrote:

2017 Energy Science & Technology Conference and will show the CORRECT way to build a Newman Machine.

FULL YOUTUBE INTERVIEW AT BOTTOM OF THIS POST: Joseph Newman's Secret Disclosure Coming by Geoffrey Miller - A & P Electronic Media

Aaron Murakami wrote:

Today, we released the Bourke Engine Documentary - the Bourke Cycle Edition.

It is difficult to find an original copy of this book (at a decent price) that was assembled by Louis Bourke, Russell Bourke's wife. It is one of the most important pieces of work when it comes to engine science and being that Russell Bourke created the world's most efficient engine, it's highly credible.

The Bourke Cycle Edition means that there are other documents included discussing the real Bourke Cycle, which were absent from the Bourke Engine Documentary. So this is a RARE book with rare documents that accompany it.

If you study this book closely, you may see that it is possible that Stan Meyer received his original inspiration from this book when you study the concepts of nitrogen as explained.

When you read the concepts about the Thermonuclear Engine - you may see that Papp may have received his own inspiration from this work.

There are too many powerful concepts to discuss in one single post, but if you have any interest in combustion or actually hydrogen detonation science in the context of running an engine, this is THE most authoritative work on the subject ever produced.

Go here to get your copy: Bourke Engine Documentary - Bourke Cycle Edition