sebosfato

Yes it is = to charging by induction. The house wiring is like a capacitor or you can say like a part of a resonant tank, one witch the transformer from the line make part of. If you add a capacitor with the right capacitance for the line you will create a resonance on the line. Anyway all this to say that the line transformer have probably very high current capability, maybe up to 1000 amps... so if you think of the wires as capacitive plates you can see that you are messing around with the charges on the wire. This distribution of electric field being connected to the primary of the transformer will create a movement on the electrons on the wire. All this in my point of view not connected to the work necessary to push and pull the charge on the wires as is not a closed circuit.


Don't add such a capacitor to the line or you will or can create a disaster.

I tried and every time i connected it the fuses blowed up. is very strange indeed. If you have a water capacitor of particular shape (steel tube inside an acrylic tube. (the one you ca see in my youtube channel on the prototype video) And connect to the line thru a dc full wave bridge rectifier to it with only one of the wires and than disconnect the first and connect the other wire, you will create a very high pulse that will burn the fuses without even closing the circuit just touching one wire and than disconnecting and than touching the other at least in my house in milan this happened aways every time, i repeated many times. The explanation i found is that the electric field on the line charged the water by induction like, and than the other wire saw it as a short circuit.

SOmething i found thinking about today is that if you have a capacitor charged and than take out the dielectric from inside of it or lower the dielectric value magically, you will raise the energy stored in the capacitor.
Like if you raise the separation of the plates while already charged.

We could think of a capacitor that changes its capacitANCE by action of the gravity field. Like having two charged spheres one on the top of the water. You charge the spheres and than make the under sphere to drop. Doing this the charge will remain the same but the voltage will raise up so as its energy all this by action of the gravity. When the sphere arrives in the "ground" having a spring some of the kinetic energy could be used to push the sphere up again with some more energy coming from the gain...
Don't know maybe is possible.

Than get a vic like transformer having a secondary and choke and diode and a capacitor connected in series and connect he the primary to the line, and the other side of the primary connect to a big mass of copper or aluminum or anything metallic. Will work as long as you connect to the one of the hot lines generally there are two each one bringing 110v and one being the grownd, or sometimes can be 2x 55v out of phase to make the 110 v... if is the first case the chance to get it to work is greater.

If you add a capacitor in parallel with the primary to match the resonant frequency of the line should give better results in my opinion. also if the secondary side is tuned somehow.

charging by induction.

Interesting, here in my country they are used a lot and i never saw or heard about this. Maybe is consequence of the switch. The switches for house or any other type of common equipment only connect or disconnect one of the wires. His transformer in his case is oscillating with the remained connection, as there is a frequency. Probably the current is so low for it is supposedly switched off (maybe there is a parasitic ground closing the circuit), thus depending on how the circuit is arranged it can be that is a charging pump arrange like the stan vic, so this capacitor will aways charge every oscillation but as in the primary there is only a very very low current "induced" it will takes long for reaching the voltage at witch the gas ionizes into the bulb and thus discharge the capacitor. This would explain why it flash periodically and interrupt you friends sleep. Suggest him to make a double switch to turn of both the wires of the line from the lamp and check if it happens again. This way we could determine if i'm right.

I think it could have to do with my theory about the induction of the motion of the free electrons of the copper (deflection) by effect of electric field force, by charge density or absence.

I think that if we could find a material in witch this electrons could flow at a high speed we could get benefit of this effect.

What you think about that?

Best Regards =)

Yes this is one of the many patents about this. Cool one though.

Happy to help.

This illustrates what i'm saying about the pressure YouTube - Agua que no cae, fundamento físico

The system will consume some energy but in the end you will have more energy than you put in.

Think about this, you have a pump, this pump will need to develop some pressure to overcome the water pressure to let the air get out of the tube to be able to fill the buoy, this needed pressure is = to the water pressure in the bottom of the tank divided by the area of the air tube port.

When you just overcome this pressure the air will flow out of the tube. When the buoy is full it will float up.

The pressure you need to apply to the tube is smaller than the pressure of the water in the bottom of the tank cause the pipe will be smaller.

When the thing get up to the top there will be still pressure inside of it so you can use this pressure + little more and charge the other buoy to make it buoy up.

Is not very clear the process, and i you fail in balancing the things will never get over efficiency. However can be done.

I think that the higher the tank the greater the efficiency will be. The tank should be closed to help the pressure discharge...

When the buoy is going up the air will start to flow out of the buoy, and you will loose pressure if the tank is open. when you discharge the pressure inside the top of the tank it will actually push the buoy down adding with the gravity force.

like this YouTube - Submarino de garrafa pet. Principios de Pascal e Arquimedes

Yes it works, I read some patents about this buoyancy generators..

The principle is that the pressure under water times the hole of the air tube is the only force you need to win, or the power you need to input. The air will just get in the buoy (while water get out) and it will go up for almost free... On the upside you need to use this air to pump into the other buoy, so you use the remained pressure again obviously will be a smaller however you than just add more energy and you get the pressure for the next cycle.

The fact is that Its cost per watt is pretty much the same as new generation solar panels...

Vickers,

Try the following,

Water with sodium hydroxide and alcohol, into a simple electrolyser.

You add this mix gas into your intake. You will see a big magic.

Actually you can create a burning flame directly over the water.

The hotter the solution get the better the effect so you can use directly 12v and two ss plates if you want less amps use 3 plates in series leaving the central not connected.

If you try this you will notice that for the amount of alcohol you put into the water (few ml) if you burn this same alcohol without this solution it will burn blue and will last only maybe one minute. On the water more than ten minutes big yellow and hot flame just over the water. Like john kanzius.

I tried only dc. I made this test 2,5 years ago... And is just as i said.

You are getting better mileage cause water expand more than air.. so you are using more efficiently the heat, converting it to expansion. Yes like was said, you would get an even better efficiency with higher compression ratio.

Here in Brazil we have still many alcohol only cars and those have higher compression rate cause the alcohol different than gasoline don't make that pre explosion effect (detonation) under higher pressure.

Today cars runs on 3 fuels so they made them less efficient (less compression rate) to be able to run any fuel. Natural Gas, gasoline and alcohol here. Again less efficient.

Wow, what kind of electret, do you know where to find it?

This is very interesting.

Thanks

??? what you mean?

Yes jibbguy,

Your are correct, however is not actually obama fault, he has probably suffered life threats, so he need to obey them. I'm pretty sure of that. He is not the only one, in my country i believe the same happen.

Problem is that those extracting enriching uranium and princes of oil won't let the empire go down, so they would create a nuclear war if needed.

This are companies with millions of stockholders also interested in maintaining their gains. Anyone could contract someone to kill Stanley meyer, so thats why no one get the responsibility.

Companies like Coke-cola comes to amazon for example to open a fabric, they will make a study of how much damAge they will cause to the rivers and how many families will die due to the toxic wastes in the first 10 years, than they calculate the injuries due to indemnities and present to the team that will approve or not the construction of the fabric. For say the gains in the next 10 years will be 10billions, and we will need to pay maybe 10 millions of indemnities to 100 families that will die, are you all in agreement with the implementation of the fabric?

you know the answer is yes.

and no one get responsibility of the hundreds of deaths.

this is the system we are living.

HELLO,

Nice, to heard from you. Meyer always talked about using voltage as a force, and that voltage alone could do work. I found that the only way it can do is by electrostatic induction. He used a bifilar coil, and talked about using the capacitance and inductance proprieties of his coils to transform dynamic voltage potential, into coherent voltage pulses. For me is all about electrostatic induction.

Yes, thanks, now is all about constructing it. I would make it with diesel engine as to be able to extract even more energy due to the higher pressure, I will also modify the inside parts for bronze or cooper parts as to be able to extract even more energy.

I will than use water as expandable fluid as i believe would be easier to compress with a pump and inject directly.

I will probably make a thing for heating the water while creating a bit of h2 and use the pressure developed to pump the water. I think 500 watts is more than enough for this part, as i already made other experiments on the field. Than just need to adjust the valves.

I would like to make it on a small 4 cylinders diesel engine.

Thanks thedude, i will get a look into that.

Lutherman, thanks for the compliments.

I will check this lee rogers engine, thanks.

I don't live in italy now, so i think all we can do to find out this will be on internet. We could ask tutanka thought, he might know this.

My belief is that i'm able to create a better world. We can if we want and believe. Every single action can make a better world for only being in the right direction.

This thing about extracting energy from the ambient to make the engines run, is incredible simple and intelligent in concept. The sun provides a great deal of heat everyday, witch gets lost into space. If we use the ambient heat energy the ambient will not over heat too. Over-unity? The sun?

I created a new thread on ionizationx to discuss this novel way to extract energy from the ambient. How to extract energy from ambient by sebosfato

If anyone is interested in seeing the video i posted it here: Electric field do perform work Concept by sebosfato...

I would like to have some money to buy a diesel engine, and to modify it to run this way, however i would try to add some water instead of air and also some hydrogen to favor the extraction of the ambient energy into movement.


If anyone want to join, few free to help in any way.

Well, i finally understood

An internal combustion engine, when compress the air, it actually is creating a high density of thermal energy from ambient, when you inject air witch is of lower temperature, you are able to extract the energy present in the ambient temperature and thats why the temperature comes out lower than went into the motor.

Very cool indeed.