ashtweth

Guys, i think the open source community should do a fund raising NON PROFIT E-BOOK for a FUND RAISING publication (REAL how too not like Ozy freedom) and show the OPEN SOURCE methods on HOW TO implement the

1) Encopra , SPAD, retro kit, (WORKING geet MODS)
2) Hydroxy
3) Bedini
4) RV

this could ut pollution better then any other, fuel savings are secondary.

By using all these methods to show how to REALLY save on gas and cut pollution ETC. ALL PROCEEDS CAN GO BACK INTO OUR COMMUNITY. We really need R and D done guys, we need to support the energetic and yahoo groups efforts WE are all trying to beat oil subjugation

ll work on this if you guys think its a good idea. Jib is a TALENTED writer and could help write the book, i trust panacea to be NON profit and make sure all goes back to our community, am open to ALL ideas how we can fund raise.

Ash

Open source engineer Peter is not only getting a magnificent 28% and has a nice open source dry cell design, but he has also shown a great publicity angle by demonstrating how his HYDROXY emissions are LOWER then a brand new car.


Peter's Website and Utube Chanel

YouTube - myhydrogencar's Channel

"Ash, I have attached results of a recent Economy test and an Exhaust Gas analysis. You can also find these at my website with explanation comments. Just look in the "HydrogenGallery" page for Test Results.

Interesting to note that my emissions are lower than required by new cars for
2009.Except my NOx due to a faulty EGR valve which is being fixed soon and back for more testing.

My car does not feel the same with Hydroxy OFF..it really lags in response and lacks zing.The exhaust gas smells cleaner and the engine is much smoother and quieter. -End

THERE ARE NO OTHER LOW COST MODIFICATIONS OTHER THEN HYDROXY, ENCOPRA,NANOKIT,RETROKIT, SPAD WHICH CAN BE FITTED TO THE EXISTING TECHNOLOGY AND CUT THE CARBON FOOT PRINT AS SIGNIFICANT!

NONE

PROVEN TECHNOLOGY,
GEET
Hydroxy Gas
(REFRESH)

Note! these variants, SPAD, Encopra, Retorkit, Nano Kit all use HYDROXY!!, they use a reactor to create hydrogen rich vapors, i have emailed the vendors and got this info, its in the "GEET" course". Other then that Dry cells are the best so far. (Do now)

HELLO - Google ten challenge
HELLO- VIRGIN CHALLENGE

Ill be getting them ALL on record , including politicians for carbon
credits/rebate/subsidies. We must show how much of the tax payer monies is
WASTED and how much pollution (lives saved) could of been taking on by using ONE of ANY of these mods at greenfest.com.au (will be on TV then too).

Time for the fire up their BUTTS. well done to the hydroxy/GEET communities Ps, ill have a Encopra kit here soon and will be open sourcing it.

Ash

Stealth gives credence to what we are saying, the ICE is inherently a polluting and in efficient piece of technology, in fact the ICE was never designed for petrol or diesel.

You need a MODIFICATION to meet today's needs and standards that are possible.Endorsements, rebates, subsidies and carbon credits need to be applied to what Stealth and we are are ALL doing, we must create this by public pressure.

Ash

Hi guys, cant believe all the stars on this thread. Doh yes the spark plug, i am working on a presentation for the gov's and Mayor of our city that shows how ONLY then open source designs out there (SPAD/Encopra/Retrokit/GEET/Hydroxy/Sparkl) are the ONLY low cost modifications in the world which can be fitted to the existing technology and cut the carbon foot print as significantly.

Even a new HEMP electric car would take over 5 years to replace all the existing ones, in reality those technologies ARE THE ONLY ones that can reduce the pollution as much!, we are it, yup open source engineers , yup think about it. Think about it.

The proposed fuel standards in 2012 and 2050! can be reached today in fact in 1918 with hydroxy(patent first appeared then) . I am also adding up the amount of emissions off the road WE are taking off with open source technology, who else gave the EFIE out to the public? I am also going to calculate the amount of tax payer monies we can cut and are wasted not adopting this technology. all to hep create public pressure and implementation.

Big Job, but thanks all of us we can do it easily.

@sucahyo please email me some details of your set up and ill take a look we crammed in space at the front of one car.

According to the MIT research paper on their GEET variant "Plasmatron", (MIT uses electricity to create the plasma where the GEET is self generating)

"If average fuel efficiency of US fleet of cars and light duty vehicles is increased by 20%, yearly fuel savings would be 25 billion gallons of gasoline (equivalent to 70% of oil presently imported from the Middle East)"

A simple 20-25% saving can be done by a OPEN SOURCE basic booster system. Then add the co2 then add the hydrocarbons that could be reduced = public health. The only other modifications which are low cost and can cut the carbon foot print as or more significantly are are the Encopra,Retofit/SPAD (GEET variants are do now kits) and the GEET.

A friend in India recently told me that:

"I am right now in the state of Punjab in India, and there are millions of agricultural pumpsets using diesel and polluting. Since Power is in shortage, every business and household has his own 3/5 kw unit which create so much of noise and pollution that it is impossible to breathe."

Lets get them out there.
GEET
Hydroxy Gas

Ash

Heya Ren, knowing the RPM you will be running them i bet we will need the steal ones LOL

Okay i have a friend in NSW who has one already ill get him to ship it over to you m8 , there are re enforced steal laminates already on this site for them(just for an idea dimension etc),
EcoInnovation
100 VAC by hand imagine the spikes!

Ash

Research and Development
thanks for posting.

Ash

There was recently a 60 minutes show covering it and yes showed proof and validation. This page has it and a solution proposed by us

Please refresh the page
Plasma electrolysis

F and P in the USA
Randy's Workshop and Engineering projects Home Page

Hi guys sorry just got in, K tai61, try this for an easy step by step wind ill conversion The Back Shed There is another site which has metal re enforcing available for it
EcoInnovation

@Matt, i could buy one and ship it up to you, however this thing weighs over 7 kg Ill keep trying to find a link for the usa ones, i think i saw one once Bro. Yup gonna try this no matter what guys, i see Rick just did a new monopole energizer multi coil kit, i want to trial this on a water fuel cell so i have other sinister motives for this

Hi Guys, we just got a Fisher and paykel motor and got thinking , instead of making it into a hot charge windmill (puts out an estimated 400 watts) Why not try and re wire it for a Bedini charge?. Lets get this tested and posted.
That would make them far more efficient in home power IMO.

We already know that the solid state can charge on 4 watts! so it only makes sense to trial this. Not sure how you would re wire it for a Bedini wind mill. I found a good site for re wiring a wind mill hot charge config, i think they typically have to re wire it from 250 volt to 12 volt. YourGreenDream - Hobby alternative energy production education and resources. Fisher and Paykel Smart Drive generators for windmills, wind power and hydro generators. Take a look guys its got some good DIY info there also. If any one has any tips on how to wire this i can get this tested and made for the forum .

Ash

Jib is still the man

Jib Mel is like you, ONE OF US. And how many of them out there are doing what YOU 2 are doing? NONE. Congrats to you my friend, i would have to be a real dumb ass not to recognize the brilliance and contributions in the open source energy community.

Ash

sucahyo- Yup Panacea University
Jib- GOOD POINT typical comment form you
Mark - All info to date Roto Verter

New in the news about the farm conversion
St. Louis Alternative Energy Technologies Examiner: Converted farm has lowest carbon foot print in the world

Well done to all

Aww thanks a lot guys, you are all really the inspiration for these efforts, dont forget if you guys were not posting and working together HERE would we be able to film that?,NO.
You guys deserve all the credit we just cant sit by with out trying to support the movement there are so many of us helping each other and many individuals like your selves who are very inspiring and altruistic. I don't think the cartels counted on us all pulling together really.

@sucahyo

Thanks for the feedback and suggestions KEEP THEM COMING, we will use the farm as make shift MAINSTREAM conduit for this science to both serve the open source movement and help make consensus reality aware of the technology [suppression too]. I have started a permaculture COURSE for the uni site, WHAT IS MORE PERFECT FOR PERMACULTURE THEN VS!.

Now as for the CB stuff, don't worry (not going to make rain) we arefully aware of the CB dangers (making a educational document also), we have 2 experts on CB's helping us for this test, one of them worked with Trevor one of them did CB stuff back in the 70's (Joel) and we asked NOT to create rain, but simply to break up a cloud (This is safe)We did not want to cause rain, as that's not needed to validate orgone science. > But thanks for posting, CB is not for the inexperienced, in fact i have a whole PDF of WHAT needs to be done before even considering it. I say leave it to the experts

Panacea Farm Conversion

This is the first farm in Australia to have all these technologies working in one place (going to be used for educational purposes). This farm is also the first to have the LOWEST carbon foot print in the world as a result of the implementation of these technologies. There are no other modifications like this which can be done to existing technologies and match this energy efficiency and the pollution cutting attributes.

This has come about as a result of the open source energy community(world first), I must say a personal kudos to all of you working together. We will be presenting these efforts of the open source community on the mainstream media this year, the farm will be ONE template used. Yes the OU technology will also get a mention. This Farm features information for technical people and the MAINSTREAM audience.

Technologies featured:

Roto Verter (energy saving and OU R and D)
GEET/SPAD
Hydroxy
SOLAR Bedini technology/Imhotep
HEMP awareness.


The re loaded versions will have updates on the GEET/VHE diesel ute and the HEMP production growing that the non profit org is doing there in the near future. Also we will be doing educational Algae Bio fuel production there (course coming soon). The Farm will also be used for Orgone experiments to help validate the science for the mainstream ethos. We will invite the mainstream press up to cover this farm and pug the open source engineers efforts shortly.

So i think we have a good start here for all. We not only achieved a 40% increase in MPG We also got the premier of our state on record regarding this technology and others. Its jib's Activism influence

Also featured is the most efficient drill in the world (RV). There are many good examples of the open source energy communities research being applied here IN THE REAL WORLD and doing real benefit. There is also valid FACTS showing how we need to create more security and attain more political support (and grant support ) for this technology/FREE ENERGY technology. Plus valid reasoning for the non profit Panacea R and center solution.

There is also a mention of the ZPE aspect of the RV and asks for help for Hector the inventor. BTW two of our engineers (open source ones) were suppressed trying to release the self running designs, ill have more info on that later.

There is a medium here for every one to use to help the cause.More to come all. Please us this info and forward to farmer s and you local politicians if you can.All technologies featured can be found on the no profit open source engineers uni site.
panaceauniversity.org


Ash

Thx Aaron/Gauss we are proud to support the open source community .

Gauss, i spoke to David Wenbert last year and the last i heard he was heading towards Bio fuel and is taking a break from ZPE technology. I am, still talking to Dave Lawton about the Derlin(trying to find a source), i believe that's the last hope to get the cell working after 2 years of trying.

Ash

Its thanks to you guys we have a great open source community, therefore great site , we are lucky to have Aaron and Peter here doing their part also. We are going to build the Milkovic for the mew course, i got given a whole new bit off stuff to add to peter';s already great stuff covering it, this is a PM alternator for power extraction.

Main thing is people can appreciate the energetic forum (listed on the site) as responsible collectively for one of the most fluent R and D groups on the net. Thanks for making great docs guys.

Sincerely
Ash

(refresh page)
Thanks to the contributors, largely to ESA.
Panacea University

Ev and Milkovic courses coming soon.
New Panacea converted farm production coming soon guys.

Ash

LOL he puts the JET in Jetijs, Latvia is lucky to have him

Such a shame these are in French this is the best GEET. Presentation/validation we have seen so far besides the two we have.

----------------------------------
YouTube - Moteur a Eau Invention Marocaine Water Engine Fuel cell gas alternative energy zero point energy

YouTube - Vidéo France 3 national voiture moteur à eau, le plan pantone http://ebooks.soutien.fr

YouTube - Vidéo TF1 Chazal Lorraine voiture moteur à eau, le plan pantone http://ebooks.soutien.fr

YouTube - Vidéo France 3 Lorraine voiture moteur à eau, le plan pantone http://ebooks.soutien.fr

YouTube - Vidéo Pantone France 2 le plan pantone http://ebooks.soutien.fr


YouTube - worldwideeagles's Channel

-----------------------------------------------------