Bench
66 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established GASPROC confidence 0.80
Mat et al. two-phase-flow electrolyzer model + experiment: gas bubbles nucleating on the electrode strongly change mass transfer, flow field, bulk conductivity, and the macroscopic current-density dis...
established GASPROC
The Electron Extraction Process is maintained during gas flow-rate changes by varying trigger pulse (59) in direct relationship to applied voltage level (58); this process also prevents spark-ignition...
established GASPROC
To prevent electron oscillation/deflection during the Hydrogen Fracturing Process, the amp-consuming circuit (180) can connect directly to the Gas Resonant Cavity's positive voltage zone (45) through...
established GASPROC
The Electron Extractor Grid (51) is attached to an electrical circuit (180) allowing electron flow (56) to pass through wire (52) to an electrical load (53, e.g. a light bulb with resistive filament w...
established GASPROC
Liberated, electrically charged and laser-primed combustible gas ions pass through the Optical Thermal Lens assembly, are expelled through a quenching circuit, and reflected through a thermal heat zon...
established GASPROC
The dislodged negative charged electrons are destroyed or consumed in the form of heat when the Amp Consuming Device (S), such as a light bulb, is positively electrically energized during alternate pu...
established GASPROC
Resistive values (R4, R6, R7, and dielectric constant of gas Rg) together with an isolated electrical ground (W) prevent electron-flow or electron deflection within circuit (BB) during pulsing operati...
established GASPROC
The Electron Extraction Circuit (BB), shown in Figure 1-7, removes, captures, and consumes electrons dislodged from gas atoms, driving the gas atoms into 'ion-state' as highly energized atoms with mis...
established GASPROC
A Gas Bleed-Off Valve prevents unwanted gas pressure buildup during the engine's 'turn-on stage'.
established GASPROC
The liberated Fuel-Gases enter and pass through the patented Fuel-Gas Processor (E), which performs as a Gas Ionization Chamber when a Voltage Intensifier Circuit (A3) is activated by the Gas Accelera...
established GASPROC
Incoming ambient air gases become laser primed and ionized when passing through the Ambient Air Ionizer (Gas Processor) (80), since the Electron Extraction Circuit (120) captures and consumes ejected...
established GASPROC confidence 0.80
Resultant sub-critical gas atoms (104a-104n) travel through the air intake manifold (109) past the exhaust gas metering port (370) and injector port (36), combining with metered fuel-gas (88) and mete...
established GASPROC
The LED's light spectrum, extending from visible into the ultraviolet region, can be selected for a given gas priming application, since the gas nucleus is more responsive to coherent rather than diff...
established GASPROC
In terms of assembly, the gas resonant cavity (410), electron extraction circuit (270), and optical lens (121) together form the gas processor (260).
established GASPROC
Laser or light intensity is variable with respect to duty cycle on/off pulse frequency ranging from 1Hz up to and beyond 10kHz, per Eq 17, where light intensity (Le) depends on on-time, off-time, and...
established GASPROC
A solid-state LED cluster-array (118a-118n) mounted on a printed circuit board emits a discrete wavelength of light energy when electrically pulsed via a variable pulsing circuit (125), varying light...
established GASPROC
Emitted laser energy (electromagnetic energy having zero mass) is injected into the Gas Resonant Cavity (410) via optical lens (121), superimposed onto the gas ionization process and absorbed by the g...
established GASPROC
Voltage fields (106/107) are physically configured via skin effect using T304 stainless steel material to form voltage plates (E3/E4), which are chemically inert to the gas ionization process and form...
established GASPROC
Ambient air gases exhibit a dielectric value such that a one-inch air gap resists electron arc-over up to 17,000 volts applied between voltage plates (E3) and (E4), which form the capacitor of the Gas...
established GASPROC
The Electron Extraction Circuit (270) functions in like manner to the Voltage Intensifier Circuit (60), except an amp-consuming device (390), such as a light bulb, is placed between the Resonant Charg...
established GASPROC
As ambient air gases (101) pass through the air filter chamber and air gate assembly, they are exposed to high energy voltage fields of opposite electrical polarity (up to and beyond 2,000 volts) caus...
established GASPROC confidence 0.80
The resultant fuel-gas is transferred through the Quenching Tube (96) and then through and beyond the Fuel Injectors (36) for hydrogen gas utilization.
established GASPROC
The Electron Extraction Circuit (120) of the Gas Processor both captures and consumes ejected electrons (7a...7n) and also prevents electron flow into the destabilizing gas process (180), as illustrat...
established GASPROC
Incoming ambient air gases (5a...5n) become laser primed and ionized when passing through the Ambient Air Ionizer (Gas Processor) (80), preparing them for the Hydrogen Fracturing Process.
established GASPROC
The Electrical Extraction Circuit decreases the mass size of the combustible gas atoms while simultaneously producing 'electrical energy' when the liberated electrons are directed away from the Hydrog...
established GASPROC
The oxygen atom, having less than four covalent electrons due to the Electron Extraction Process, is unable to reach a Stable-State (which requires six to eight covalent electrons) when the two hydrog...
established GASPROC
The dislodged negative charged electrons are destroyed or consumed in the form of heat when the Amp Consuming Device (S), such as a light bulb, is positively electrically energized during alternate pu...
established GASPROC
Resistive values R4, R6, R7, the dielectric constant of the gas (Rg), and an isolated electrical ground (W) prevent electron-flow or electron deflection within circuit (BB) during pulsing operations a...
established GASPROC
The Electron Extraction Circuit (BB), shown in Figure (1-14), removes, captures, and consumes the dislodged electrons from the gas atoms, causing the gas atoms to reach a 'Critical-State' — highly ene...
established GASPROC confidence 0.80
Solid state electrical photon-light sources (Light Emitting Diodes, 1100 xxx 116n) can replace Sun Rays (539) as the energy source; via 'Voltage Tickling of State Space' (770) acting as an energy gene...