Bench
1,315 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established STEAM
To ensure proper Fuel Cell operation during frigid or below-freezing conditions, the Steam Resonator assembly (450, Figure 3-46) is inserted into the Fuel Cell (120, Figure 3-24) and thermostatically...
established
Periodically back-flushing (rinsing out) the Electrostatic Filter Assembly (440) is all that is required to ensure and sustain the Electrostatic Filter Process.
established
Exposing water contaminates (144a...144n) to applied voltage fields (E1/E2) produces electrically charged contaminates (157/158) and also kills bacteria that might be present in the water bath (68).
established WFC confidence 0.80
Resonant Action (170) not only excites the water bath but also functions and performs as a water-pump due to gas rising, enabling circulation of purified water back into the Fuel Cell.
established WFC
The Electrostatic Filter Process produces a purified water bath (156) which is recycled back into the Fuel Cell (120) of Figure 3-24, since Resonant Action (170) also functions as a water-pump (causin...
established
Negative electrically charged contaminates (157a...157n) migrate to and are entrapped by positive electrical voltage post (147), while positive electrically charged contaminates (158a...158n) are attr...
established WFC
During Resonant Action (170), liberated micro-sized contaminates (144a...144n) pass through water inlet line (145) and are deposited inside Electrostatic Filter Assembly (440), where they are exposed...
established WFC
Suspended and dissolved water contaminates (144a...144n) are typically present at 20 ppm to 40 ppm in natural water, and are uniformly released from and superimposed onto the water bath (68) during Re...
established
Opposite or reverse movement of the Laser Accelerator (JJ) decreases Injectors (36) on-time which, in turn, reduces engine speed.
established
As the Laser Accelerator (JJ) advances toward 'Peak' engine performance, the Fuel-Injectors (36) open gate-time (on-time) increases proportionally.
established
Interlocking the Laser Accelerator output (JJ) with the Laser Distributor output (HH) of Figure (3-1) causes Fuel-Injectors (36) to be 'Tuned' with both the Air Management System (350) of Figure (3-2)...
established
Rotating light-gate triggering circuit assembly (430) sequentially activates Pulse Shaping Generator (440) of Figure (3-4) to produce a constant 50% Duty-cycle Pulse-Train (Figure 3-16) fed to Analog...
established
Laser Distributor assembly (430) of Figure (3-44) functions in similar manner as Laser Accelerator (20) of Figure (3-10), except its light-gate (141) rotates in the same direction as Spark-rotor (142)...
established GASPROC confidence 0.80
Resultant sub-critical gas atoms (104a-104n) travel through the air intake manifold (109) past the exhaust gas metering port (370) and injector port (36), combining with metered fuel-gas (88) and mete...
established GASPROC
The LED's light spectrum, extending from visible into the ultraviolet region, can be selected for a given gas priming application, since the gas nucleus is more responsive to coherent rather than diff...
established GASPROC
In terms of assembly, the gas resonant cavity (410), electron extraction circuit (270), and optical lens (121) together form the gas processor (260).
established GASPROC
Laser or light intensity is variable with respect to duty cycle on/off pulse frequency ranging from 1Hz up to and beyond 10kHz, per Eq 17, where light intensity (Le) depends on on-time, off-time, and...
established GASPROC
A solid-state LED cluster-array (118a-118n) mounted on a printed circuit board emits a discrete wavelength of light energy when electrically pulsed via a variable pulsing circuit (125), varying light...
established GASPROC
Emitted laser energy (electromagnetic energy having zero mass) is injected into the Gas Resonant Cavity (410) via optical lens (121), superimposed onto the gas ionization process and absorbed by the g...
established GASPROC
Voltage fields (106/107) are physically configured via skin effect using T304 stainless steel material to form voltage plates (E3/E4), which are chemically inert to the gas ionization process and form...
established GASPROC
Ambient air gases exhibit a dielectric value such that a one-inch air gap resists electron arc-over up to 17,000 volts applied between voltage plates (E3) and (E4), which form the capacitor of the Gas...
established GASPROC
The Electron Extraction Circuit (270) functions in like manner to the Voltage Intensifier Circuit (60), except an amp-consuming device (390), such as a light bulb, is placed between the Resonant Charg...
established GASPROC
As ambient air gases (101) pass through the air filter chamber and air gate assembly, they are exposed to high energy voltage fields of opposite electrical polarity (up to and beyond 2,000 volts) caus...
established WFC confidence 0.80
The Gas Modulator Process (320) allows hydrogen fuel cell (120) to be retrofitted to any conventional internal combustion engine (55) without engine change, simply by metering the proper amount of exh...
established
Liberated and cooled exhaust gases (99) are directed to hydrogen injector system (200), which meter-mixes and superimposes a predetermined amount of non-burnable gases (99) onto incoming ambient air g...
established
As fuel-gas (88) enters engine cylinder (102) and undergoes thermal gas ignition (98), hydrogen (86) and oxygen (87) atoms are consumed forming superheated water mist (103) and non-combustible exhaust...
established
To further reduce hydrogen burn-rate (330) to other fossil-fuel burning levels, additional non-combustible gases (99a...99n), supplied via ambient air (101), are added to gas-mixture (88) during gas i...
established WFC
The Electrical Polarization Process (160) is a physical process using opposite electrical polarity attraction force (qq') to disrupt and switch off the covalent bond between the unlike charged water m...
established WFC
Chemically inert stainless steel (T304 material) voltage zones (E1/E2) submerged in natural water (68), used with the Electrical Polarization Process (160), sustain the gas mixing ratio (88) by preven...
established WFC
Water bath (68) functions as a 'Gas Mixing Regulator' since the highest possible thermal explosive energy yield from hydrogen during normal gas ignition (98) occurs at the exact composition of water,...