Skip to content
Stan’s Legacy

gmeast

7 posts · 48 more in threads this archive does not carry · writing between Mar 2009 and May 2011

An identity on Energetic Forum as it was harvested, not an account on this site. Nobody here has claimed it, and nothing connects it to a person by name.

natural gas reformer

#2 ·

reformer

sherif_imam wrote:

Dear all,
I'm searching for natural gas reformer to produce hydrogen to use it in fuel cell (PEMFC).
The rating of the reformer is:
0.1 Kg/hour ( the production of hydrogen)
could any one help me to find the suitable company which sells this reformer?
thanks
Hi sherif_imam,

You would likely be better off building your own. There are plans and instructions all over the internet. You will probably end up using almost pure platinum mesh as the catalyst because the 'big boys' have the resources to produce their 'alloyed' catalyst ... cause they got the bucks. It's just a combustor that burns kinda rich and sends it's products through the cat to make to increased C and O to form better regulate the balance of CO and CO2 waste. It just strips off as much hydrogen as possible.

I had an intense interest in reformers at one time as well as PEM Cells. I thought they might be the great 'mid-ground' for stripping hydrogen from gasoline to power the fuel cells for all-electric cars. In this way, you could have the range of a gas powered car and the efficiency of an electric and NO weight penalty (you know ... batteries). But 'power cells' are about to take a quantum leap in capacity and low cost, so why don't you just wait for that ... it's a' comin'.

Later

Bill Gates calls for 'Energy Miracles'

#15 ·

wants to do something but doesn't know how to do it

elias wrote:

I think that Bill Gates wants to do something but doesn't know how to do it, for example he wanted to help the poor countries, but he ended up making vaccines for them!

He needs to get information and we are the guys that should guide him, and if he really wants to help, he'd better put his money into developing ZPE/Aether devices. First way is to get him convinced that matter is not the source of energy, energy is the source of matter, and then, and then when you are not dependant on matter, that is when you can go out developing a device that harnesses energy from the fabric of space-time itself.

Somebody has to give him a new pair of glasses.
Hey elias,

You are so right. He is completely out of his element. He is used to the enormous profits made by publishing a bunch of 1's & 0's on some media and charging 1,000,000% of cost for it ... things sure played into his court I'd say. It's a phenomenon that certainly will not be repeated, at least on the same scale.

I'm afraid Gates is too 'mainstream'. It's possible that he cannot think 'outside the box' that he himself built. For him to participate, he would need to hire consultants to advise him. Those consultants would come from ... where else? ... mainstream science and engineering. I thought maybe Dean Kamen might come up with something, but then again he gave us "IT" ... you know ... the Segway ... what happened to that now ? Oh yeah ... nothing !

Bill Gates calls for 'Energy Miracles'

#11 ·

wrong name ... but that's OK

Michael John Nunnerley wrote:

Hi Ted

nice photos, in the last one on the right, is that a methane production plant?


Mike
Hi Mike,

If you are referring to the "Shingles" - "Stand-Alone" photos of PV panel installations, then my name is not "Ted", it's Greg. That being true, the large tank in the lower right of the last picture is the well-water tank and the smaller white vessel is the pressure accumulator.

Greg

Bill Gates calls for 'Energy Miracles'

#8 ·

The Energy Miracle Is Already Here

Hi everybody,

Before I move out on to the street (Thursday some time), I wanted to let you know that the "MIRACLE", that Bill Gates is trying to gain support for in finding, is already here and has been here for over 30 as a practical solution to current and future energy demands and needs.

Place yourself about 100 feet above any local city, town or neighborhood, shopping center. See how much 'rooftop real estate' is there. How about parking lots, easements or whatever ?

I'd like to show you some FREE ENERGY MACHINES I built in the early 2000s. I built them for other people, but 'I still built them' and, if nothing else, can stand proud and say "... I took part, I played a role, and I made a difference...".

Here's just some of them:

Some PV Shingles (Grid Tied)


System with Battery Back-up (Grid Tied & Independent Sub-Panel)


System To Just Support a Millionaire's Swimming Pool (Grid Tied)


Completely Stand-Alone System ... These People are Energy-Independent

Stoopidest Thing Youve ever Tried

#11 ·

Stupid, Stupid, Stupid, Stupid, Stupid !

This isn't actually something I consciously 'tried' but it's something I DID and I think it falls into the spirit of this post.

I was about 25 (33 years ago). My dad was a doctor. He owned a huge powerboat (yacht really) and liked to invite colleagues out for a day of fishing. It was gasoline powered by a pair of 490 (or so) cu. in. something or others ... big fuel tanks and all. Hauled butt too. I was cleaning and touching up a little. I had the fuel outboard overflow vents (pretty little chromie things) temporarily disconnected on the inside of the bilge. The dockmaster called me up to the office, it was my dad, he wanted me to top off the fuel tanks because he had some guests coming into town and that meant a fishing trip off Point Loma.

Well, so I did the procedure, closed the hatches, engines covers, turned on the blowers, started the engines, puttered over to the dock, shut everything down and began filling. When I noticed that the dock pumps had pumped more fuel than the capacity of the tanks, I knew something was wrong. No way could I have forgotten to reconnect the fuel overflows now, could I ?

Instead of burping overboard to indicate a full tank, the fuel was just going into the tank, up the vent line and down into the bilge.

BUT HERE'S THE STUPID PART. I opened the engine covers only to see about 120 gallons of gas in the bilge, 6 inches deep. Then I stepped down into the bilge to look at the vents and while so doing accidentally stepped on one of the voltage regulators bolted to one of the main stingers. My foot slipped off taking the metal cover of the regulator with it and shorting out the contacts inside the regulator in the process. EVERY WIRE GLOWED ORANGE HOT AS THEIR INSULATIONS MELTED OFF.

Thank goodness for the fact that chemistry actually works. Had there been the slightest breeze to waft even the smallest amount of air into the bilges, there would have been an explosion. The harbor police towed us to a location where the bilges could be safely pumped into barrels and the bilges cleaned.

I rewired the boat.

Panacea Farm Conversion

#15 ·

fantastic!

ashtweth wrote:

Panacea Farm Conversion

This is the first farm in Australia to have all these technologies working in one place (going to be used for educational purposes). This farm is also the first to have the LOWEST carbon foot print in the world as a result of the implementation of these technologies. There are no other modifications like this which can be done to existing technologies and match this energy efficiency and the pollution cutting attributes.

This has come about as a result of the open source energy community(world first), I must say a personal kudos to all of you working together. We will be presenting these efforts of the open source community on the mainstream media this year, the farm will be ONE template used. Yes the OU technology will also get a mention. This Farm features information for technical people and the MAINSTREAM audience.

Technologies featured:

Roto Verter (energy saving and OU R and D)
GEET/SPAD
Hydroxy
SOLAR Bedini technology/Imhotep
HEMP awareness.


The re loaded versions will have updates on the GEET/VHE diesel ute and the HEMP production growing that the non profit org is doing there in the near future. Also we will be doing educational Algae Bio fuel production there (course coming soon). The Farm will also be used for Orgone experiments to help validate the science for the mainstream ethos. We will invite the mainstream press up to cover this farm and pug the open source engineers efforts shortly.

So i think we have a good start here for all. We not only achieved a 40% increase in MPG We also got the premier of our state on record regarding this technology and others. Its jib's Activism influence

Also featured is the most efficient drill in the world (RV). There are many good examples of the open source energy communities research being applied here IN THE REAL WORLD and doing real benefit. There is also valid FACTS showing how we need to create more security and attain more political support (and grant support ) for this technology/FREE ENERGY technology. Plus valid reasoning for the non profit Panacea R and center solution.

There is also a mention of the ZPE aspect of the RV and asks for help for Hector the inventor. BTW two of our engineers (open source ones) were suppressed trying to release the self running designs, ill have more info on that later.

There is a medium here for every one to use to help the cause.More to come all. Please us this info and forward to farmer s and you local politicians if you can.All technologies featured can be found on the no profit open source engineers uni site.
panaceauniversity.org


Ash
Hi Ash,

I wish I was there instead of here.

Peace,

Greg