Bench
1,333 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established
These abnormal or unstable conditions cause the combustible gas ions to over compensate and breakdown into thermal explosive energy (gmt); this atomic thermal-interaction between highly energized comb...
established
Absorbed Laser energy (Va, Vb, Vc) weakens the Electrical Bond between orbital electrons and the atomic nucleus; simultaneously, electrical attraction-force (qq'), stronger than normal due to lack of...
established GASPROC
The oxygen atom, having less than four covalent electrons due to the Electron Extraction Process, is unable to reach a Stable-State (which requires six to eight covalent electrons) when the two hydrog...
established
Thermal Atomic interaction (gmt) is caused when combustible gas ions from water fail to unite or form a Covalent Link-up or Covalent Bond between the water molecule atoms, as illustrated in Figure 1-1...
established MISC
Exposing expelling laser-primed and electrically charged combustible gas ions exiting the Gas Resonant Cavity to a thermal-spark or heat-zone causes thermal gas-ignition, releasing thermal explosive e...
established MISC
The Electron Extraction Process (BB) is hereinafter called 'The Hydrogen Gas Gun' and is placed on top of a Resonant Cavity Assembly, as illustrated in Figure (1-17) as to Figure (1-18).
established MISC confidence 0.80
Laser activated or laser primed gas ions repel the dislodged electrons being consumed, as illustrated in Figure (1-8) as to Figure (1-20).
established GASPROC
The dislodged negative charged electrons are destroyed or consumed in the form of heat when the Amp Consuming Device (S), such as a light bulb, is positively electrically energized during alternate pu...
established GASPROC
Resistive values R4, R6, R7, the dielectric constant of the gas (Rg), and an isolated electrical ground (W) prevent electron-flow or electron deflection within circuit (BB) during pulsing operations a...
established GASPROC
The Electron Extraction Circuit (BB), shown in Figure (1-14), removes, captures, and consumes the dislodged electrons from the gas atoms, causing the gas atoms to reach a 'Critical-State' — highly ene...
established MISC
A recurring positive voltage-pulse (k) attracts the liberated negative electrons to a positive voltage zone (E3), while a simultaneous pulsating negative voltage potential (E4) attracts the positive c...
established MISC
The absorbed Laser Energy forces or deflects electrons away from the gas atom nucleus during the voltage-pulse Off-Time.
established MISC
Displaced combustible gas atoms exit the waterbath and pass through the Gas Resonant Cavity (T), then are exposed to a separate pulsating laser energy-source (V) at higher voltage levels (E3/E4), caus...
established MISC confidence 0.70
Injecting 'Electromagnetically Primed' and 'Electrically Charged' combustible gas ions (produced from water) into other light-activated Resonant Cavities further promotes gas-yield beyond voltage/lase...
established WFC
Injecting Laser Energy into the Electrical Polarization Process and controlling light-energy intensity causes the Combustible Gases to reach a higher energy-state (electromagnetically priming the comb...
established
Laser or light intensity is variable as to duty cycle on/off pulse-frequency from 1Hz to 65 Hz and above (Eq 17), where Le is light intensity in watts, T1 is current on-time, T2 is current off-time, a...
established
Ohm's Law is applied for the LED circuit in a parallel array, where (It) is the forward current through the LED cluster-Array and Vcc is the applied voltage, typically 5 volts (Eq 16).
established
Laser/light intensity is linear with respect to forward current through the LEDs. The specified forward current (I_led) is typically 20mA per diode, and the LED voltage drop (V_led) is typically 1.7 v...
established
The absorbed Laser Energy (Electromagnetic Energy) causes many atoms to lose electrons while highly energizing the liberated combustible gas ions prior to and during thermal gas-ignition.
established WFC
Light-emitting diodes arranged in a Cluster-Array (Figure 1-11) emit a narrow band of visible light energy into the voltage stimulated water bath, as shown relating Figure 1-13 to Figure 1-12.
established WFC
Attenuating and adjusting the pulse-voltage-amplitude with respect to the pulse-voltage-frequency produces hydrogen gas on demand while restricting amp flow.
established WFC
Ionized atoms and free floating negative electrons are deflected by pulsing electrical voltage fields of opposite polarity through the Electrical Polarization Process, imparting a second physical part...
established WFC
Subjecting the water molecule to even higher voltage levels causes the liberated atoms to go into a 'state' of gas ionization, with each liberated atom taking on its own net electrical charge.
established WFC
Dissociation of the water molecule by way of voltage stimulation is called 'The Electrical Polarization Process' in this document.
established WFC
The liberated and moving atoms (having missing electrons) regain or capture free floating electrons once applied voltage is switched off during pulsing operations, becoming electrically stabilized wit...
established WFC
Once negatively charged electrons are dislodged from the water molecule, covalent bonding (electron sharing) ceases to exist, switching off or disrupting the electrical attraction force (qq') between...
established WFC
At the same time, the stationary 'negative' electrical voltage field (E2) attracts the positive charged hydrogen atoms.
established WFC
The stationary 'positive' electrical voltage-field (E1) attracts the negative charged oxygen atom and also pulls away negative charged electrons from the water molecule.
established WFC
Placement of a pulse-voltage potential across the Excitor-Array (ER) while inhibiting electron flow from within the Voltage Intensifier Circuit (AA) causes the water molecule to separate into its comp...
established VIC
Inductor (D) in relationship to inductor (C) electrically balances the opposite voltage electrical potential across voltage zones (E1) and (E2) within the Voltage Intensifier Circuit.