SkyWatcher

Hi all, going in a new direction with the flywheel project.
Decided to get rid of belts and pulleys and integrate the generator into the flywheel itself.
Picked up a 10 lb. cast iron weight lifting plate and was glad to find the center hole is accurate from manufacturing.
Then made a shaft adapter for the center hole, which is a tad over 1 inch, using steel epoxy putty in a mold, then drilled 5/8" shaft hole and lathed to fit cast iron plate.
The flywheel rotates very true.

Will then use bedini style pulse motor circuit for propulsion and probably air coils around the rotor/flywheel, for power generation.
This should be more efficient, as the intention is not to generate big power, just power some lights and charge some batteries for this design.
Will be attaching neo magnets to periphery of flywheel to start with, though a separate wood rotor could be made also and have plans to add more flywheel weight if needed.

Working on the structure at the moment.
peace love light

Hi all, Hi rakarskiy, thanks for sharing the information, the added weight to the edge of the wheel is a good idea, though would need to use another method for that, as the long v-belt is currently around the edge of the flywheel.
And the low speed generator current is comprehended, though not entirely clear about the flywheel flow rate aspect.
My interpretation, you mean the flywheel needs to be able to maintain it's rpm for a bit with the power off, to be able to attain good effects.

Hi alexelectric, yes good response.
This means, will be posting here from now on, though will observe and read the things shared on the other forum thread, as it does have value.
Though the behavior is not of value to me, though when I have any results to share, it will be posted at both sites, regardless.

peace love light

Hi alexelectric, it does exist, it's from 'hydrogen appliances'.

Finished mounting the motor and aligning all the belts.
At 12 volts input, which is too low, will be testing 24 volt input tomorrow, as it needs some more rpm.

Also am aware the flywheel needs to achieve a certain threshold speed for the effects we are looking for.
So am aware of the possible need to add an additional pulley system to increase the flywheel speed, we shall see.

Yes, sharing is beautiful, though as long as it is done with kindness and respect, otherwise what is the point, which was an issue at the other forum.
Will be continuing to experiment with this, look forward to learning more about these types of flywheel, etheric energy devices.
peace love light

Hi alexelectric, thanks for the positive reply.

I bought this permanent magnet alternator awhile ago, it is meant for wind or hydro generation.
It is rated at 48 volts, has full wave bridge built into it.

It is meant for lower rpm generating, so it should work well for this.
peace love light

Hi all, hi rakarskiy, it is a modified alternator, with neodymium permanent magnets inside, used for wind generators.
So it does not need anywhere close to 4000 rpm, maybe 400 rpm to make some good juice.
Flywheel is 24" diameter at around 18 lbs.

Hi alexelectric, yes, though this is a continuation of a project that I never followed through with.

Thanks for the video link.
Yes, that is the idea, good video showing a good simple design and a better designed flywheel than mine.
peace love light

Hi all, Have been working on a flywheel generator, similar to the Chas Campbell device and other similar devices by others.
Powered it up today at 12 volt input, though it is a 24 volt input motor.
It still should have started the flywheel turning at 12 volts, with the permanent magnet alternator in place, though with no load on it.
So the pulley ratio arrangement is not suitable for the small 100 watt scooter drive motor.
Then had to redo the pulley setup and at the moment, still finishing remounting the drive motor in the new position.
Positive, kind and helpful comments welcome.
If you think these types of devices have no merit, then please talk about it in your own thread.
peace love light

Here is a pic of the project at the moment.

Hi folks, hi ufo, i would rethink the sheeple term, that is what it looks like, though i have seen enough in this world to come to the conclusion, that there is some invisible malevolent energy that can influence people, not just the conditioning, programming the groups in this physical world use.
And this energy knows all we do and write on the internet, etc. and they use those around you to try and intimidate you.
Now, if the cabals have that kind of technology, then it explains everything.
If not, then we have some interloper intelligences, messing around with this world.
Though have also witnessed a similar unseen energy influence humans in positive, benevolent ways, so it could very well be, we each make a choice to be unconditionally loving and our individual reality morphs around us based upon what kind of energy we wish to embody.
Ironic it is, that all this applies completely to all this suppression, negative unseen energy beings feed off anger, stress, anxiety, hate, fear.
So what better way to create that fuel supply for them, than to get humans to oppress one another in hopes people will respond in a negative fashion on a daily basis.
peace love light
tyson

Hi folks, hi ufo, from what we are told of his-story, peace love and kisses has never worked because many of humanity chose to do the opposite.
Whatever the reasons, that is the facts and so peace, love and kisses has not even been given a real chance in most cases.
If everyone stops helping these few oppressive groups and instead, serves the highest good of all humanity, these small groups will disappear in the blink of the eye.
Humanity is the power, one and all, be the change and it will come, hehe.
peace love light

Hi folks, by all means, seek what one feels is truth, though lets look at this from another angle for a moment.
What ultimately do these type of humans or groups actually need from us, they need our dependency on them.
In almost all scenarios of suppression, oppression, the oppressing individuals or groups almost always invariably engineer circumstances to try and cause the oppressed to be dependent on them, either by manipulation, coercion or force.
Soo, maybe we have far more power than some would have us think.
Give your dinousaur automobiles away or more ideal, have them crushed and stop using what gives them power and claim our infinite power.
After all, these same groups have engineered most societies to believe they need gas guzzling beasts and miles of horrid concrete and pavement.
We will call the method they use, PROBLEM NEED SOLUTION.
Maybe some have heard of David Ickes, problem reaction solution.
Well, the real mainpulation method that actually affects our daily well being of providing for our basic needs, is PROBLEM NEED SOLUTION.
For example, they may slowly create human living systems that maybe space people apart too far from where food is grown, thereby creating a PROBLEM, which creates the false NEED for heavier, larger, longer endurance transport to areas that need the food.
Then they introduce in this case, automobiles, SOLUTION.
They are then able to control the fuel source to supply these automobiles, creating a dependency that transfers power to these small groups, by our use and continued belief of the need.
This is my perspective of how we extinguish this power we have given to these small groups, simply stop empowering them.
All rationalizations and excuses of why we can't stop empowering them, are only manifestations of fear or believing in that which appears real, though is in TRUE reality, false.
peace love light
tyson

Hi folks, Hi velacreations, well it's rather hard for most to replicate an idea that is suppressed, that was kind of the message.
It is the intent within, that creates the outer world.
So, if the few are given power to dictate to the rest of us, we get things we have to pay for and as can be seen, devolves into inferior technology, with designed in expiration times, that enrich these few that do not have the highest good of all at heart.
To speak of a lack of certain technologies, without looking at the whole picture and all the evidence that proves an agenda of suppression has been going on.
It is provable fact, that solar panels are intentionally kept at a low efficiency level, by these few dictators, wherever they are in the shadows.
I'm all for replicating and innovating, though it should be acknowledged.
We as humanity, have an issue that should be dealt with, the only problem is, this issue is inside of us, call it a spiritual issue, call it a greed issue, call it a fear issue, call it a control issue, call it a power issue, call it what you will.
It can be seen in almost everything around us, from paying for dirt and paying for the house on the dirt, paying for food, paying for energy, paying for, paying for, paying for.
Who are we ultimately paying anyway and why?
These human vessels did not come with pockets for very good reason.
For any real discussion about the needs of human beings or devices that may serve those needs, a hard look within, is a great start.
Hi duncan, thanks for sharing the pdf, that seems like it might work with a vande graff type generator or dirod or something, which takes next to nothing to rotate.
peace love light
tyson

Hi velacreations, this may not be the answer you are expecting to hear, as it might seem counter intuitive to the programming or conditioning that we as humans, have been exposed to since our seeming birth.
It is only with the heart, that one can see clearly, all that is essential, is invisible to the eyes.
The decoding of this is, all is energy or consciousness and the heart has a connection to our original energetic form of self (one).
This true self (one) is aware that all so called physical manifestations, including these vessels we currently animate, are constructs of this energy or consciousness.
All seeming problems or lack of solutions are a byproduct of how well this connection from the heart to the true self is communicating between one another.
At the level of the true self, one knows we are all one and from the same source and the seeming separation at this human level is seen for the illusion it is.
All solutions to all seeming problems are within, they do not exist outside of us, for that is illusion.
For example, lets say a replicator technology has existed for along time, dug up in an archeology find or perhaps given to us by another race of beings from the cosmos.
This replicator will create anything one needs to live a life of comfort and abundance and is easy to construct this device.
Now, if certain groups of human beings prevented our use of such devices by withholding this information for whatever reasons, is the solution truly outside or external to us, as in a technology, heater, free energy device.
It should be apparent, that the solution is within us and always has been.
peace love light
tyson

Hi folks, would not let me edit my post, just wanted to add, that pulsing may not be a requirement, only that the flywheel is allowed to rotate for a few minutes to cohere or polarize the space the flywheel sits within.
My research shows, that even simple geometric shapes can cohere or polarize this invisible medium we all sit within, such as pyramid shapes, cone shapes, etc. and different effects occur when these shapes are rotated.
peace love light
tyson

Hi folks, I posted this also in bizzy's thread.
At least in the stationary setup, i think this effect is at play and probably why when a flywheel is pulsed, it can self run and power other loads.
The massive flywheel coheres the ether space and when mechanical loads are applied to wheel, it takes much less energy to maintain rotation speed, due to the coherence of this invisible medium, which is probably similar to polarizing a permanent magnet and i feel is the same source for the homopolar mechanical generators.
peace love light
tyson

Hi joe, I know you have shared this information before and i still feel it is worth testing, as many other similar devices seem to have used similar principles.
Here is your pic and another setup from another that claims similar results.


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us
Tilley - Wilson Machine as secret? - KeelyNet 01/12/03

peace love light
tyson

Hi cikljamas.
I would guess hes using a 120 volt drive motor.

He could be using the same motors, one for drive and one for alternator, then stepping down alternator voltage.

If washing machine squirrel cage motors have permanent magnets then it would work for the alternator. Though drive motor doesn't need permanent magnets.

I have a 120 vdc 2 HP treadmill motor and i have a car alternator that was converted with neo magnets and outputs 24 volts I could use for this. Though the alternator has a bit of cogging, so may not be ideal.
peace love light
Tyson

Edit: Though i do have my garry stanley motor air-core coil still in tact, that can be used as a no cogging generator.
Then i could use my treadmill motor and attach a wheel with magnets to treadmill motor and place at edge of stanley motor to interact with the neo magnets for an experiment. Though the stanley motor has axial magnet placement, that's why i'm wondering if it will work the same, only way to know is try it i guess.

Hi folks, Hi cikljamas, thanks for sharing this video and information and your video as well.
If what mindfreer has shown in his video is truthful, then it works and one has to get the geometry and magnet strength and spacing correct or it probably will not work.

Also, he probably powered his primary drive motor with a 12 volt battery powering a 120 volt inverter then input 120 volts to main motor.

Then if the generator outputs 120 volts ac, he stepped it down with a transformer to charge the 12 volt battery or the alternator is 12 or 24 volts then rectified to charge battery and maintain loads.

I have a bunch of 1" diameter neo magnets, this sure is looking tempting to replicate.

Thanks for sharing that video ibpointless2,
i seem to recall an experiment that showed a rotating flywheel when spun up to speed for a few minutes steady and after stopping required far less input to rotate up to the same speed as if space was somehow agitated and space itself is put into motion.

Maybe magnets can help augment this effect, which seems likely based on your results of it increases and decreasing based on which side you placed the magnets.
peace love light
Tyson

Edit: i wonder if this would work with axially placed magnets.
Also i seem to recall Dennis lee, who came up with the sunshine generator i think, he showed a video where he had two wheels with magnets on periphery like mindfreers video and when he spun one they both interacted and both rotated for way longer than what one would expect, i think he was showing these effects by that demonstration.

Hi jibbguy, thanks for sharing the information that I hope most here are already aware of, though the issue still needs to be healed for the sake of life. Though I have come to a realization about this, people will not listen to you or me unless they have the eyes and ears to hear, otherwise it's like spitting in the wind, nobody's home so to speak. It seems like a spiritual consciousness awareness battle to me, where the manipulators (whatever their origins) are well trained in how the human mind and psyche functions and unless a human being breaks out of the conditioning they have received, odds are they will go to their grave in ignorance, which to me ignorance is what evil really is. We can only hope this consciousness awakening is occurring and then people will naturally see through the actually poor attempt at mind control and will naturally realize how fake this reality has been for awhile now in terms of real progress with regard to all things that would raise the quality of life for all. I have told everyone I know about technology suppression and other things over the past few years and they mostly just revert back to the old program conditioning. Though I am seeing people become more loving as well, so all is not lost. Love is what needs to flourish in the hearts and minds of all, for this suppression situation to change, otherwise, without love foremost in their hearts and minds, they either will not care or will be apathetic or will be the manipulators. Love is our savior, nothing else.
peace love light
Tyson

Hi folks, thats funny dankie. Heck not mention who has the money anymore to build anything elaborate, considering the time required at a job to get this worthless ink paper.
I used to build more elaborate motors and such and learned a lot, now i realize other things need to change and we would have had and will have excess energy devices coming out of our ears.
peace love light
Tyson

Hi folks, i cant locate the elecret thread so i posting this here. I'm noticing something so far which others have noticed when batteries have gone dead and become like low voltage elecrets. I had these generic 2400mah nimh AA's laying around 3 of them and were almost 0 volts, then i decided to try and rejuvenate them with bedini style solid state charger using flyback diode method. It was working fine, i was getting maybe 60-70% capacity then i accidentally left them to discharge to long in discharge cycle and they were almost at 0 volts again, however when disconnecting load they shot up quickly past 3 volts and settled around 3.68 volts, well they wont go below that voltage, they keep climbing quickly back up to about 3.7 volts, i've been pulse lighting multiple led's, then i thought i'd try charging another duracell 2650mah nimh AA and its charging this single cell and now the voltage has climbed even higher on the generic nimh AA's to 3.73 volts. Anyone else see this behavior with batteries as i've read others have.
peace love light
Tyson

Hi folks, well i have yet to do in depth analysis of COP on my setup, however i have been able to rejuvenate lead acid gel's and recently rejuvenated a nimh 3600 mah rc battery pack that would not take a normal charge anymore and after pulse charging from flyback diode, now takes a full rate charge on normal fast charger. So these devices have a high practical value to me even without considering COP values.
peace love light
Tyson