elias

RESONANCE is a key to free energy

Rhozzi,

I am not very experienced in this area (I am a Computer Engineer) and this document and this thread is meant to be a start for experimentation with this device. So don't expect to hear professional advice from me in this area!

Well, what I can tell you is that you can go study what RESONANCE is? and how it is formed in the world around us. I can describe resonance as this:
The frequency at which applying a natural force through a natural medium to a natural element makes oscillations of the element add to the applied force is called the RESONANCE FREQUENCY.

For resonance you can see these links:
Resonance - Wikipedia, the free encyclopedia
The Physics of Resonance

To understand how this heater works and to maximize the heat output of it we must understand what resonance is and how it is formed. It does not matter what materials we use for constructing the heater, but it does matter how we can build and tune it to make it resonate at a particular frequency of 50Hz, 60Hz of else.

I think that tuning the device will be much easier with a device that generates input power at a particular frequency. So by adjusting the frequency one can understand how this device resonates.

The document describes two physical factors for making it resonate:
1- The thickness of the bowls.
2- The distance between them.

So don't worry about the elastic pipe.

Another thing I noticed is that the distance between the two bowls must not be small, because it decreases the impedance and makes it draw more current.

As I have understood from my research in the free energy field, RESONANCE plays an important role for taping the zero point energy of nature.

Hope you'd be able to build one, The heater heats because water becomes partly a resistor in the circuit and starts heating up.
I am working on it sometimes and I am going to build a power supply to adjust the frequency to learn how to tune it and when this resonance occurs in this heater. I will post pictures with some test data when I really get by calculations COP > 1.

With Love
Elias

Peter,

I constructed a simple Davey heater by using two metallic bowls and it works!! But I don't know if it has COP > 1. It boiled two liters of water pretty fast. I am looking for a way to tune it to get the most out of it.

As you have extensive experience in this area can you recommend an easy and affordable way to measure the efficiency of heaters?

I'll post some pictures and videos later.
Thanks
Elias

Hello,

A simple device that the inventor claims that has a COP of around 20.
It simply consists of two bell shaped bowls within each other not touching. Alternating current of 50Hz or any other frequency is applied across the two bowls, while the bowls are in water. The water heats up so fast and quickly reaches to boiling point.

The trick as it is claimed to tune the bowl so that 50Hz or any other frequency applied is the resonant frequency of the system. The tuning is done by adjusting the distance of the two bell shaped metallic bowls from each other.

This is quite interesting if it works as claimed. The full document is attached.

I wonder what will happen if we pulse the bowls? Will it heat the water too or make Hydrogen?
Maybe I'll experiment with it later to see what's its capabilities.

Good Luck
Elias

Has anybody replicated a gray tube yet?

Hello Daniel,

Thanks for your useful websites on free energy. My first curiosities in this field arose when I read about Peter's Edwin Gray descriptions and that fascinated me a lot because I thought that's it to free energy. I am pretty sure that it can be replicated. The problem is that I have not encountered anyone who claims that he's done it. Or maybe they're afraid to tell this. I think that there is more than enough information out on this subject, and if it WORKS then that's amazing. As I have understood from my studies, the secret of the tube lies in three things: 1. Sharp Impulses of High Voltage, 2. A Carbon Spark Gap 3. A good conductor with some tiny holes on it wrapped around the spark gap to capture the radiant energy. Splitting the positive is another issue which makes use of the high voltage to both drive the load and charge the battery.

I have not attempted to replicate these stuff yet but It is one of my future plans. I hope that one day, someone brave enough will come out and tell us loudly that yes I replicated it and it works and you can do it exactly like this.
I personally think that the main threat is towards those people who keep things secret!!! If you release whatever you know to the public, then why would anybody want to kill you unless you want to mass produce it.
It is not so difficult to see this when one browses through the free energy history. I think that Tesla was afraid to release it because he thought that these info may get into the hands of the evil. But what happened? He kept most of his work secret until those evil people apparently murdered him and got the documents they needed to produce weapons and etc...

Now is a time with the advent of the Internet that anybody can disclose secrets at a mass scale and can protect himself.
If anybody has replicated the Gray tube please speak out.

With Gratitude
Elias