Bench
422 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established WFC
The geometrical gas production rate peaks out or stops when water flow rate into the resonant cavity becomes constant or reduced during gas production.
established WFC
Geometrical gas production (Figures 13, 14, 15) occurs when resonant cavities are stacked exit port to inlet port, or as a singular cavity unit; charged gas particles are injected into additional reso...
established WFC
Since liberated electrons carry a negative charge, the positive voltage pulse causes them to move uniformly at the pulse voltage frequency, further aiding the compounding (resonant) action.
established WFC
Because ions are in motion, particle collision occurs when ion particles strike water molecules undergoing voltage separation, increasing gas yield; particle collision also ionizes other liberated ato...
established WFC
Formed ions are deflected by high-intensity voltage pulses (53/54); increasing pulse voltage frequency increases ion movement, decreasing frequency slows it, constant frequency yields constant movemen...
established WFC
As liberated gases are exposed to a pulsating laser or light-emitting source (45), gas atoms absorb light radiation and lose electrons, becoming positively charged ions; an electromagnetically primed...
established WFC
Water molecules, having polar charges, are subjected to a high-intensity voltage pulse that separates the water molecule atoms by opposite polarity attraction, liberating hydrogen and oxygen gases fro...
established WFC confidence 0.80
The absorbed electromagnetic (light) energy (45) by the atoms forming the water molecule helps disrupt the electrical mass equilibrium of the water molecule atoms when subjected to the high-intensity...
established WFC
Liberated gas atoms are momentarily entrapped to impart a physical particle-impact force on the water molecule being split apart; this process, in which liberated atoms are moved/oscillated uniformly...
established WFC
The water molecule is disassociated by way of voltage stimulation, as described in Sections A through M of the document.
established WFC
The resonant cavity (44) can take on different shapes and sizes to meet a predetermined gas need, with spherical and longitudinal resonant cavities given as examples.
established WFC
The resonant cavity, identified as element 44, is formed using Stainless Steel T304 material.
established WFC
An oscillating voltage zone is formed around another voltage zone of opposite polarity, creating a water gap between them; the resulting voltage zones take on a cavity-design shape due to the skin eff...
established WFC
Per U.S. National Bureau of Standards reference cited in the text, water is 2.5 times more powerful (gtnt) than gasoline, underlying the hydrogen-fuel equivalence calculations used for water-fuel inje...
established WFC
At 3000 rpm, engine produces 50 revolutions/sec, divided by a 2:1 distributor turn ratio gives 25 rotor revolutions/sec, multiplied by 4 water-fuel injectors yields 100 injection cycles/sec. Dividing...
established WFC
On-road testing showed 111 ml/min gasoline consumption at 65 mph; using 2.5x hydrogen-fuel equivalence of water, this equals 44.4 ml/min water flow rate, or 0.740 ml/sec water-fuel consumption rate at...
established WFC confidence 0.80
The Energy Yield Enhancement of water is increased beyond the Natural Gas burning rate via the Hydrogen Fracturing Process, which prevents and/or retards reformation of the water molecule during therm...
established WFC
Retrofitting the Water Fuel Cell to a vehicle does not compromise safety integrity but promotes driver safety since water is a non-burnable fuel-liquid, unlike conventional flammable fuels.
established WFC
Drop-out Relay-Switch (SW4) is activated when the Electronic Control Unit (B) senses a Fuel-Cell malfunction, part of the Safety Control Circuit (H).
established WFC
Jar-switch (SW3) is activated when a car crash occurs, forming part of the Safety Control Circuit (H) that shuts down the Fuel-Cell system.
established WFC
Oil Pressure Switch (SW2) is activated when engine oil pressure drops to a predetermined level, forming part of the Safety Control Circuit logic.
established WFC
Safety Control Circuit (H), shown in Figure 6, is automatically activated in case of engine failure to switch-off power loading to Electronic Control Unit (B), electrically de-energizing the Fuel-Cell...
established WFC
The engine provides the non-combustible gases on demand because Ambient Air is used in firing the Gas Combustion Process.
established WFC
To fine-tune or adjust the hydrogen burn-rate for maximum engine performance, non-combustible gases from the engine exhaust system are metered and mixed with the Fuel-Cell Gases under control means, a...
established WFC
The hydrogen gas-mixture burn-rate remains constant regardless of gas flow-rate since water acts and performs as a Gas-Mixing Regulator.
established WFC
Non-combustible gases supplied by the water intermix with the liberated hydrogen and oxygen gases to form the hydrogen gas-mixture that burns at 44 cm/sec.
established WFC
The Fuel-Cell Assembly of Figure 7 is directly retrofitted to the car engine without engine-change, because the patented Hydrogen Gas-Mixture matches the burn-rate of Alcohol, dropping from 325 cm/sec...
established WFC
Hydrogen storage is not required since hydrogen gas is being produced on demand by the Water Fuel Cell system.
established WFC
The Fuel-Cell is composed of Resonant Cavities pre-arranged to maximize Fuel-Energy delivery to the car engine, as illustrated in Figures 2-4.
established WFC
The Water Fuel Cell is a patented process using a solid-state electronic control system to produce hydrogen gas on demand from water through voltage stimulation, called the Electrical Polarization Pro...