Bench
1,304 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established VIC
The blocking action of L2's field prevents and inhibits electron flow from passing through or arcing over the capacitor water-gap (Cp); this is termed the 'Electron Inhibiting Effect' (631).
established VIC
Inductance Field L1-FL1 performs the 'Capacitance Charging Effect' (628), while at the same time Inductor Field L2-FL2 restricts electron movement through the VIC Impedance Network Circuit by locking...
established VIC
Adjusting the programmable pulse-waveform input signal frequency 'tunes-in' to the dielectric property (Re) of water, reducing amp flow to a minimum while allowing voltage potential to rise toward inf...
established VIC
Both Inductors L1 and L2 are bifilar wound in equal length so their electromagnetic field intensities are equal (FL1 = FL2), promoting the 'Electron Bounce' phenomenon.
established VIC
Inductors L1-L2 (Figure 7-6), placed on opposite sides of the water-capacitor ER, act as Resonant Charging Chokes (614/615) and together form the Resonant Voltage Effect Circuit (670).
established VIC
Inductance Reactance occurs when resistance (Rs), capacitance (Cd), and Inductance (FL) interact during D.C. Pulsing, increasing voltage across the water-capacitor (ER) beyond the applied Voltage Pote...
established VIC
All dielectric coatings on the VIC wire have an effective 3KV per mil dielectric value and are formulated to endure the automotive temperature range from -40°C to 155°C.
established VIC
Both magnet wire sizes (622/623), the Primary and Secondary Pickup Coils, use solderable Nysol (Polyurethane Nylon Jacket) insulation enamel coating as an electrical shield-material.
established VIC
The stainless steel resonant charging choke wire (614/615) is coated with the 'Pyre-ML' trade name 'Himol' polymer coating-material to impart thermal and mechanical resistance.
established VIC
The Secondary Pickup Coil (623) of the VIC uses 35 AWG (.007 in) copper wire equal to 13K ohms per pound weight.
established VIC
The Primary Coil (622) of the VIC uses 22 AWG (.028 in) copper wire equal to 5.1933 ohms per pound weight.
established VIC
Resonant Charging Chokes (614/615) are made of 430F/FR 36 AWG (.006 in) stainless steel (s/s) wire, which equals 60 micro ohms per centimeter.
established VIC
The series resistance value (Rs) of the VIC choke/coil windings is determined by the composition of the wire material in terms of its ohmic value (electrical resistivity) per given length and diameter...
established VIC
The circular-spiral turns of wire in the VIC choke, forming parallel electrical surfaces, are separated by an Insulated Dielectric Coating Material which forms a series of capacitors (Cda-Cdn) when ma...
established VIC
Inductors (614) and (615) of the VIC are wound or coil-wrapped, per the multi-layer equation (Eq. 20), to increase magnetic flux intensity between the turns (618a-618n) of the coil-wrap (640).
established WFC
The Resonant Cavity forms capacitor (ER) when the dielectric liquid of water (85) is placed or injected between electrical conducting plates (E9/E10) while applied voltage Potential of opposite polari...
established WFC
The resultant Surface Polarity Effect (skin effect) (624) supplies a residual atomic Electrical Charge Field that helps maintain molecular alignment of water atoms (617) during pulsing operations.
established WFC
After the applied voltage forms molecular electrical orientation (625a-625n) in the plate material, this orientation remains in electrical atomic alignment after pulse off-time (T2), aiding transferen...
established WFC
The stainless steel (s/s) T304 material forming Voltage Zones (E9/E10) undergoes particle alignment of its atomic structure when exposed to applied electrical voltage fields (66/67), producing molecul...
established WFC
Applied voltage Potential (66/67) causes and sets up Molecular Polarization Alignment (617) via electrical molecular rotation, positioning each water Molecule (85a-85n) under opposite electrical attra...
established WFC
Rain water (85f), being almost free of contaminates due to the Water Evaporation Process, is a resistive liquid having an ohmic value of 78.54 ohms and acts as a liquid-insulator restricting the flow...
established WFC
The Water Gap (616), which forms the Taper Resonant Cavity, is occupied by a dielectric liquid identified as natural water (85) having no electrolyte added thereto.
established VIC
Distilled water is generally lab-tested at 1 ppm or less contamination, as illustrated in Figures (7-15) and (7-14).
established VIC
Electron interaction (movement of electrons through the liquid medium of water) is further inhibited since natural water contaminants (144a...144n) are normally less than 20 ppm.
established VIC confidence 0.80
The stabilized water molecule structure (85) maintains molecular stability by opposing the exchange of electrons from an external electron source (amp-inducing circuit) beyond its molecular structure.
established VIC
The established Dielectric Value of Water (85) is 78.54 ohms, attributed to the electron 'L' orbit of the water molecule occupying the maximum allowable eight electrons upon covalent linkup of one oxy...
established VIC
Distributed Capacitance (Cda...Cdn) and Distributed Inductance (D1a...D1n) of Inductor Coil (614) interact with the dielectric value of the water bath (85/Re), producing the 'Electrical Charging Effec...
established VIC
Component Reactance to D.C. pulsing transforms the Inductor (614)/Capacitor (E9/E10) LC circuit into a Resonant Charging Choke, which steps up a unipolar oscillation at a given charging frequency, usi...
established VIC
Capacitor (E9/E10) as to (720) of Figure (7-11) is formed when outer tapered surface (66) and inner tapered surface (67) create Water-Gap (616), with Dielectric Water Bath (85/Re) placed between them,...
established VIC
Inductor (614) is an insulated wire wound in a spiral pathway around Bobbin Cavity (580) of Figure (6-1) to form the Voltage Stepping Coil (710) of Figure (7-10).