Bench
1,304 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established VIC
Inductors (L1/L2) should always have larger Reactance than Capacitor (ER, Figure 7-2) in order to maximize amp restriction, enhancing 'Voltage Deflection' (SS'-617a...617n-RR') shown in Figure 7-4.
established VIC
Plate Inductance (Lc) is the Inductance Reactance of Inductor (L1) and Inductor (L2) in series with the Resonant Capacitor (140-170 of Figure 7-6, corresponding to 690 of Figure 7-8).
established WFC
Water temperature (Rt), kept cool-to-the-touch, keeps insulation resistance (Re) constant since amp flow remains minimal.
established WFC
The dielectric property of water opposes amp leakage (Re), while another property of water takes on an 'Electrical Charge'.
established VIC
Capacitance Reactance is determined by the insulation resistance (Rs+Re) and Inductance (L1/L2) interacting together during D.C. Pulsing.
established WFC confidence 0.80
Circumference surface points (E9a - E9n) are determined from the diameter cross section (D) of the cylindrical surface using the mathematical constant (x) = 3.1416 (pi), per Figure 7-11 (720).
established WFC confidence 0.80
Surface Area (A) of the Resonant Cavity is expressed via longitudinal length (h) of the tapered resonant cavity, exit pan circumference surface point (a = E9d), and cylindrical circumference surface p...
established VIC confidence 0.80
(Eo), the Free-Space Permittivity of Water, is established by the VIC Circuit's ability to restrict amp flow; the ratio (e/Eo) is the Dielectric Constant of Water.
established WFC
Capacitance (Cp) between Electrical Voltage-Plates (E1/E2 - E9/E10) is determined by the surface area (A) of the plates, the distance (d) between plates (in inches), and the permittivity (Eo) of water...
established WFC
The dielectric property of water (78.54 ohms @ 25°C) permits storage of Electrical Charge when a potential voltage difference exists between Electrical Voltage-Plates (E1/E2 as to E9/E10).
established WFC confidence 0.80
Each resonant cavity design functions as a Voltage Wave-guide (570) with a gap-size (35) sufficient enough to allow the 'Quenching Effect' to take place, as illustrated in Figure 7-12 (730) and Figure...
established WFC
Excitor Plates (E1/E2) can be configured as: linear cylindrical resonant cavity (Tubular Cavity 730A) producing a Traveling Constant Electrical Voltage Wave; taper cylindrical resonant cavity (730B) p...
established WFC
Electrical Voltage-Plates (E1/E2), called Excitor Plates or Voltage Zones, are made of Stainless Steel T304, which does not chemically interact with liberated hydrogen, oxygen, and non-combustible gas...
established WFC
Capacitor (ER) is automatically formed when dielectric liquid water (Re) is placed between Electrical Conducting Plates (E1/E2), per Figure 1-1 (Memo WFC 420).
established VIC
The inductance formula uses N (number of turns), A (mean radius in inches), B (length of coil in inches), and C (depth of coil in inches), with L expressed in microhenries.
established VIC confidence 0.80
By optimizing distributed capacitance (Cda...Coo) and distributed inductance (Dla...Dln), the coil's Inductance Field Strength (FLa...FLn) is intensified so the coil functions as a voltage multiplier...
established VIC
Inductance (L, in microhenries) of a multi-layer coil of rectangular cross section is computed from turns (N), mean radius (A, inches), coil length (B, inches), and coil depth (C, inches). Optimizing...
established WFC confidence 0.80
Dielectric gap-spacing, denoted (Cp), is one of the parameters (along with voltage amplitude, duty cycle, gated pulse-frequency, and inductor/coil lengths) that determines the thermal explosive energy...
established VIC confidence 0.80
The text identifies a Secondary Pickup Coil (523) with a Length parameter denoted (FL3a xxx FL3n) as one of the factors influencing thermal explosive energy-yield from water.
established WFC
Thermal Explosive Energy-Yield (gtnt, 16a-16n) instantly produced from water (85) is determined by Voltage Amplitude (Vn), Duty Cycle of Pulse Train (T1-T2a...T1-T2n), Gated Pulse-Frequency of applied...
established VIC
Inductor (L1) acts and performs in like manner to Inductor (L2) since both Inductor (L1/L2) are physically the same size and shape.
established VIC
Inductance Reactance determines the voltage swing from the highest voltage level (Vn) to the volts switch-off point (Vff), and establishes Impedance (FL) which minimizes heat loss of electrical input...
established VIC
Inductance Reactance effectuates the 'Step Charging Effect' (680, per Figure 7-7) when the Pulse off-time (T2) is less than the Pulse on-time (T1).
established VIC
Inductance Reactance doubles the input frequency (64a * 64b) when a 50% Duty Cycle Pulse (T1 = T2) is inputted, while also increasing applied voltage amplitude (Vo-Vn).
established VIC
Inductance Reactance directly determines Stored Energy (Wa), which is controlled by the input Voltage Potential as attenuated or varied via Voltage Amplitude (Vo, Va, Vb-Vf, Vg-Vn, per Figure 7-13) an...
established VIC
Stored energy (Wa) in Joules (Watt-seconds) is a function of Inductance (L) in Henries and current (I) in amperes, per the stated energy relationship for Inductance Reactance.
established VIC
Lengthening the Inductor (L1/L2) lengths applies an even higher Voltage Potential (66/67) across the Resonant Capacitor (140-170, labeled ER), because Inductance Reactance stores energy.
established VIC
The electromagnetic coupling fields encourage the Voltage Inducement Process across the VIC Impedance Network Circuit without amp 'influxing' (i.e., inhibiting amp flow) between the Positive Voltage P...
established VIC
The Electron Inhibiting Effect combined with the Voltage Enhancement Effect is achieved because stainless steel 430F/FR wire-material is electromagnetically inductive to incoming flux lines without th...
established VIC
At elevated voltage amplitudes, the primary electromagnetic coupling field (Rp), transmitted via the Inductance Pulsing-Core through the VIC Coil Assembly, passes through both Inductors L1 and L2 simu...