Bench
1,304 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established VIC confidence 0.80
In practical operation, a minute amount of amp leakage is present due to Electronic Component Limitations, but it is negligible to the overall performance of the Hydrogen Fracturing Process when subje...
established WFC
The physical force-yield (Fy) produced during gas-ignition is directly related to the liquid volume of water (85) per injection cycle and the applied Resonant Voltage Intensity (Vo-Vn), as illustrated...
established WFC confidence 0.80
During pulse on-time (T1), electron clustering occurs within the Copper Wire Zone (52), inhibiting electron flow to maintain opposite voltage potential across the Resonant Water Gap (616), which is pa...
established VIC
Electron Bounce Phenomenon, Voltage Coefficient of Inductance (FL1/FL2), Voltage Coefficient of Capacitance (Cd1/Cd2), Voltage Coefficient of Resistance (Rs1/Rs2), and the Dielectric Coefficient of Wa...
established VIC
The Electron Bounce Phenomenon (EbP) sustains and maintains the induced voltage potential without 'electron discharge' through Choke Coil (62), while simultaneously inhibiting additional electrons fro...
established VIC
Magnetic field coupling passing through the Secondary Coil-winding (52) dislodges electrons from copper atoms in the copper wire, producing positive copper ions that create positive voltage potential...
established VIC
The resultant dynamic voltage potential of difference is balanced in equal electrical intensity of opposite polarity because the Voltage Coefficient of Inductance (FL1/FL2), Voltage Coefficient of Cap...
established VIC
The total inductance of the Choke Coils (FL1, FL2) is derived with L1 and L2 (choke coils 56 and 62) in series with Secondary Coil (52), both exposed to the same Voltage Transformer (26-53-52) magneti...
established VIC confidence 0.80
Magnetic flux from the closed-loop pulsing core (53) penetrates inductance coil-windings (52, 56, 62) during each pulse on-time, with the pulse-train tuned to the dielectric property of water (Re), ca...
established VIC
The Capacitance Charging Effect (628) prevents amperage from influxing away from the Water Gap (Cp), and together with both Choke-Coils (56/62) conducting positive/negative voltage potential during pu...
established VIC
The Electron Inhibiting Effect causes 'Electron Clustering' to produce a Negative Voltage Potential (B-) at one side of the Water Gap (Cp); this occurs via low electrical power input when Choke-Coil (...
established VIC confidence 0.80
Aiding Inductance Fields (FL1-FL4) produce an Inductance Charging Effect and a Resonant Voltage Effect that interact with the dielectric properties of water (Re) to cause and inhibit electron flow (IF...
established VIC
The VIC Coil Assembly (580), comprising Inductor Coils (26, 52, 56, 62), is constructed and rotated so all coils share the same electromagnetic polarity orientation (indicator mark 'e'), allowing thei...
established VIC
The total inductance of the Choke Coils (Lt cc, fields FL1-FL2) is derived from the individual inductances of choke coils (56) and (62), in series with the Secondary Coil (52) voltage potential, with...
established VIC
Total inductance (La) of the Primary Coil (26) and Secondary Coil (52) is calculated with their fields aiding via Coupling Inductance (Rp), using individual coil inductances (L1, L2) and mutual induct...
established VIC
The impedance ratio of the VIC transformer is determined from the sum of the magnetic field strength (FL4) of the primary coil (26) and the induced magnetic field (FL3) of the secondary pickup coil (5...
established VIC
Secondary Coil-Wrap (52) is formed from turns of wire in each bobbin cavity (505), with the bobbin cavities electrically connected in series arrangement (505a-505n), each adhering to equation (Eq 20),...
established VIC
The turns ratio of the VIC Transformer (26/52) is determined by an equation relating Np (primary turns on spool cavity 504) to Ns (secondary turns summed in series across bobbin cavities 505a-505n for...
established VIC
Magnetic Induction (71a-71n) is determined by the Inductance Permeability (μL) of the core material (53) together with VIC circuit geometry, which together enable step-up of Voltage Potential (Vo-Vn)...
established VIC
The Secondary Pickup Coil-winding (52) has more turns of wire than the Primary Coil-winding (26), producing step-up transformer action via magnetic flux lines induced by pulsing of the Primary Coil.
established VIC
The Inductance Core (53) is composed of 'Grain Oriented' Electrical Steel laminations that step up applied voltage when magnetic field coupling crosses over from the Primary Coil-winding (26) to the S...
established VIC confidence 0.80
Total VIC 'Circuit Resistance' to D.C. current flow is expressed and determined by combining Rl (secondary pickup coil resistance), Z2 (choke-coil L1 impedance), Z3 (choke-coil L2 impedance), and Re (...
established WFC
Re, the dielectric property of water in the VIC Circuit Resistance formula, has a typical resistive value of 78.54 Ω, since rain water (85f) contains less than 20ppm of any type of contaminants due to...
established VIC
Rl, the resistive value of Secondary Pickup Coil 52 (Figure 7-8), is combined with the magnetic field strength of primary coupling field 71 in direct relationship to inductance field strength Rp, whic...
established VIC
Coil-wraps 56 and 62 (choke coils L1 and L2) are Bifilar wound together onto a single spool-bobbin, giving each choke-coil the same impedance value.
established VIC
The two VIC choke-coils L1 (coil 56) and L2 (coil 62) are wound from stainless steel (s/s) wire, each with a typical resistive value of 11.6 KΩ, determined by inductance field strength (FL1, FL2) when...
established WFC confidence 0.80
When thermal atomic agitation occurs at gas exit port (32, Figure 4-5), it spark-ignites expanding water gas-fuel (45/46/47, Figure 4-5) during the water inject cycle (70, Figure 4-5), releasing therm...
established WFC confidence 0.80
Voltage Ignition Process (90, Figure 5-5) utilizes Dynamic Voltage Potential (600, Figure 6-3) of opposite electrical stress (SS'-617-RR') to cause thermal atomic agitation (90, Figure 4-7), i.e. kine...
established WFC confidence 0.80
The Hydrogen Fracturing Process (390, Figure 3-42) is brought on and triggered once liberated and expanding water gases (100, Figure 4-8) pass beyond exit port (E9d).
established WFC
Capacitor (ER) should remain relatively small due to the dielectric value of water, in order to obtain maximum Thermal Explosive Energy-Yield (16a...16n, Figure 4-5), which subsequently establishes th...