Bench
1,304 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
established
Interlocking the Laser Accelerator output (JJ) with the Laser Distributor output (HH) of Figure (3-1) causes Fuel-Injectors (36) to be 'Tuned' with both the Air Management System (350) of Figure (3-2)...
established
Rotating light-gate triggering circuit assembly (430) sequentially activates Pulse Shaping Generator (440) of Figure (3-4) to produce a constant 50% Duty-cycle Pulse-Train (Figure 3-16) fed to Analog...
established
Laser Distributor assembly (430) of Figure (3-44) functions in similar manner as Laser Accelerator (20) of Figure (3-10), except its light-gate (141) rotates in the same direction as Spark-rotor (142)...
established GASPROC confidence 0.80
Resultant sub-critical gas atoms (104a-104n) travel through the air intake manifold (109) past the exhaust gas metering port (370) and injector port (36), combining with metered fuel-gas (88) and mete...
established GASPROC
The LED's light spectrum, extending from visible into the ultraviolet region, can be selected for a given gas priming application, since the gas nucleus is more responsive to coherent rather than diff...
established GASPROC
In terms of assembly, the gas resonant cavity (410), electron extraction circuit (270), and optical lens (121) together form the gas processor (260).
established GASPROC
Laser or light intensity is variable with respect to duty cycle on/off pulse frequency ranging from 1Hz up to and beyond 10kHz, per Eq 17, where light intensity (Le) depends on on-time, off-time, and...
established GASPROC
A solid-state LED cluster-array (118a-118n) mounted on a printed circuit board emits a discrete wavelength of light energy when electrically pulsed via a variable pulsing circuit (125), varying light...
established GASPROC
Emitted laser energy (electromagnetic energy having zero mass) is injected into the Gas Resonant Cavity (410) via optical lens (121), superimposed onto the gas ionization process and absorbed by the g...
established GASPROC
Voltage fields (106/107) are physically configured via skin effect using T304 stainless steel material to form voltage plates (E3/E4), which are chemically inert to the gas ionization process and form...
established GASPROC
Ambient air gases exhibit a dielectric value such that a one-inch air gap resists electron arc-over up to 17,000 volts applied between voltage plates (E3) and (E4), which form the capacitor of the Gas...
established GASPROC
The Electron Extraction Circuit (270) functions in like manner to the Voltage Intensifier Circuit (60), except an amp-consuming device (390), such as a light bulb, is placed between the Resonant Charg...
established GASPROC
As ambient air gases (101) pass through the air filter chamber and air gate assembly, they are exposed to high energy voltage fields of opposite electrical polarity (up to and beyond 2,000 volts) caus...
established WFC confidence 0.80
The Gas Modulator Process (320) allows hydrogen fuel cell (120) to be retrofitted to any conventional internal combustion engine (55) without engine change, simply by metering the proper amount of exh...
established
Liberated and cooled exhaust gases (99) are directed to hydrogen injector system (200), which meter-mixes and superimposes a predetermined amount of non-burnable gases (99) onto incoming ambient air g...
established
As fuel-gas (88) enters engine cylinder (102) and undergoes thermal gas ignition (98), hydrogen (86) and oxygen (87) atoms are consumed forming superheated water mist (103) and non-combustible exhaust...
established
To further reduce hydrogen burn-rate (330) to other fossil-fuel burning levels, additional non-combustible gases (99a...99n), supplied via ambient air (101), are added to gas-mixture (88) during gas i...
established WFC
The Electrical Polarization Process (160) is a physical process using opposite electrical polarity attraction force (qq') to disrupt and switch off the covalent bond between the unlike charged water m...
established WFC
Chemically inert stainless steel (T304 material) voltage zones (E1/E2) submerged in natural water (68), used with the Electrical Polarization Process (160), sustain the gas mixing ratio (88) by preven...
established WFC
Water bath (68) functions as a 'Gas Mixing Regulator' since the highest possible thermal explosive energy yield from hydrogen during normal gas ignition (98) occurs at the exact composition of water,...
established
Dissolved air gases (97), primarily composed of non-combustible gases (74) such as nitrogen and argon, act as a 'Gas Modulator' during thermal gas ignition (98) by physically retarding the rate at whi...
established WFC
The Fuel-Gas mixture (88), formed from hydrogen (86) and oxygen (87) released from water bath (85) via the Electrical Polarization Process (160), has a hydrogen gas burn-rate of approximately 47 cm/se...
established
Under normal gas ignition/combustion, the released fuel-gases net a thermal explosive energy yield of approximately 2.5 times greater than gasoline.
established WFC confidence 0.80
Stainless steel voltage plates (E1/E2) physically form voltage zones (66/67) regardless of the geometric shape or configuration of the resonant cavity.
established WFC
Under actual certified laboratory testing, stainless steel T304 life expectancy (material decomposition) is 0.0001 per year, since voltage is a physical force creating a non-chemical environment with...
established WFC
Voltage zones (E1/E2) are composed of stainless steel T304 material, which is chemically inert to hydrogen, oxygen, and ambient air gases dissolved in water and liberated during voltage stimulation.
established VIC
To keep applied voltage amplitude constant while promoting Resonant Action, the incoming pulse train can be varied independent of voltage amplitude to attenuate voltage intensity and affect gas produc...
established GASPROC confidence 0.80
The resultant fuel-gas is transferred through the Quenching Tube (96) and then through and beyond the Fuel Injectors (36) for hydrogen gas utilization.
established VIC
To further prevent voltage fluctuation during resonant action, the Phase Lock Loop technique of the Pulse Indicator circuit (110) is utilized during pulsing operations.
established WFC
Insulated housing (72) prevents voltage coupling to the water bath, allowing applied voltage amplitude to remain constant across water molecules, stabilizing gas production during voltage stimulation.