Bench
53 published findings from the ongoing work — what has been established, calculated and observed at the bench, each traceable to the session that produced it.
0 of 53 findings have been tied to a device. The rest are grouped by the subsystem they were filed under, which is a broader claim: a note under Electrical Particle Generator has been said to be about the subsystem, not about any one of its four units.
established EPG
By encasing or coating the closed-loop Electrical Particle Generator (EPG) with a waterproof material, the EPG can be used underwater or in the deepest realm of space.
established EPG
The Electromagnetic Pump Assembly (30) acts as a direct-drive linear induction motor, with the coil-array (35a-35n) as stator displacing the magnetic fluid-medium along a bearing surface; it may run o...
established EPG confidence 0.80
An oscillating magnetic ring (31) forms around the pickup coil-array and a concentric ring (29) forms inside/below the tubular pathway; the space (32) between fields 29 and 31 allows magnetic lines to...
established EPG
EPG electrical power output is determined by: fluid-medium velocity, number of pathway-channels per spiral-divider, number of turns/twist per unit length of the spiral divider, magnetic field strength...
established EPG
Series-to-parallel hookup of the pickup coils (2a-2n) determines amp draw as to applied voltage, with Power Output = Amps x Voltage.
established EPG
Electrical power output phasing is achieved by wrapping the pickup coil in Right-hand (27) or Left-hand (28) direction: grouped Right-hand wraps give positive unipolar DC pulses, grouped Left-hand wra...
established EPG
Subdividing the Spiral Divider (9) into many pathway channels (19a-19n) of non-magnetizing material such as electrical steel M27 increases the number of magnetic flow circuits; further spiraling the t...
established EPG
Because the particles (3a-3n) are permanently magnetized, transformer interaction (magnetic field coupling) cannot occur between the Orientation Coils (12/13) and the pickup coils (2a-2n); the pulsing...
established EPG
A Variable Pulse Voltage Frequency Generator (14) triggers/energizes the orientation coils (12/13) simultaneously during particle deflection; pulse-frequency electrical output (23) is determined stric...
established EPG
Dual-Orientational coils (12/13) are inserted opposite the pickup coil-array, on the far side of the Electromechanical Drive System; when energized they stabilize the field, and when de-energized the...
established EPG
A Spiral Divider (9) is inserted into the tubular pathway, passing through the pickup coil-array and terminating at (but not passing through) the Power Drive System; this causes the magnetic field to...
established EPG
Once the tube is filled with the fluid-medium (3), the pickup coil-array is electrically energized to produce an electromagnetic field surrounding the tube, permanently magnetizing the material and fo...
established EPG
The tube is filled with permanently magnetized material (3): a liquid slurry of micro-size magnetized particles suspended in liquid Teflon or light-oil, or a permanently magnetized gas composed of ato...
established EPG
The Particle Accelerator Assembly can be a Mechanical Accelerator Drive Assembly (20) using a non-magnetic turbine wheel (21), or an Electromagnetic Pump Assembly (30) that moves the fluid-medium via...
established EPG
A Particle Accelerator Assembly (10) is inserted and affixed to the closed loop tube on the end opposite the pickup windings (2); it propels the permanently magnetized fluid-medium (liquid slurry or g...
established EPG
A wire-coil (2) or coil-array (2a-2n) is wrapped around one end of the non-magnetic tube to comply with Maxwell/Faraday Laws of Inductance; for the spiral pathway (8), the pickup coil is placed around...
established EPG
The Electrical Particle Generator uses a non-magnetic tube (aluminum, brass, glass, and/or plastics) formed into a closed loop pathway without open ends, as shown in Figures 26-30; this pathway can be...
established EPG
In either Quiescent or Active-State, the resultant magnetic field transverses pickup-coils to produce electrical energy.
established EPG
In Active-State, the laser energy is pulsed and passes through the Gas-Lattice to produce a magnetic pulse-wave, as illustrated in Figure 29 as to Figure 26A and 26B.
established EPG
In Quiescent-State, the laser energy is superimposed onto the Gas-Lattice and 'stored' inside the close-loop tubular EPG system to maintain a given or predetermined magnetic field strength during EPG...
established EPG
Nickel ions and cobalt ions are interchangeable with and duplicate the magnetic properties of Iron ions undergoing Laser priming.
established EPG
Increasing Laser intensity increases the magnetic field strength of the gas-lattice in a linear function.
established EPG
The spinning electrons simply interact with both electrostatic forces and electromagnetic forces to produce an enhanced magnetic field, an extension of 'The Electron Theory Of Magnetism'.
established EPG
The absorbed Laser energy forces the Iron ions' electrons to spin at a faster rate when taken to a higher energy level, which in turn amplifies and strengthens the magnetic field (Domain magnetic fiel...
established EPG
Magnetic Field Enhancement occurs when the Magnetized Gas-Lattice, placed inside the EPG close-loop tubular system, is exposed to and interacts with Laser energy, as illustrated in Figure 29 WFC Tech-...
established EPG
Magnetic Field Strength is 'measured' in GAUSS UNITS and is determined by the linear volume of the Gas-Lattice.
established EPG
Grouping the Magnetic Flux-Lines together forms a 'stable' magnetic field since the magnetic coupling-field between the Iron ions or Domains helps hold the Iron ions in linear alignment beyond the bon...
established EPG
The Argon atom electrons tend to pair-off in orbits with opposite spins, which prevents the formation of a second magnetic field.
established EPG
The Magnetic Flux Line follows the alignment of the Iron ions (Fe+ xxx Fe+), since Argon ions (Ar+ xxx Ar+) act as an insulator to the flow of magnetic Flux-Lines.
established EPG
Since the electrons of the Iron ion (Fe+) spin in one direction only (Nickel and Cobalt ions likewise), the magnetic field of each Iron ion, called Domains, unite to form a discrete magnetic field cal...
established EPG
The newly 'structured' Gas-Lattice becomes magnetized when momentarily exposed to a magnetic field, as illustrated in Figure 1-9.
established EPG
Gas-Lattice formation of unlike atoms by way of the Electron Extraction Process is, hereinafter, called 'The Gas Bonding Process'.
established EPG
During Gas-Lattice formation, Iron ions (Fe+) can be replaced by other atoms exhibiting magnetic properties such as Nickel ions (Ni+) or Cobalt ions (Co+).
established EPG
Covalent bonding between like atoms does not occur due to the 'stronger' Electrical Attraction-Force (qq') between unlike atoms, which favors bonding between Argon and magnetic metal ions instead.
established EPG
Stable-state of the Gas-Lattice occurs when the covalent shell of each unlike atom structure becomes full: the Argon atom (Ar) has a covalent shell of 8 electrons while the Iron atom (Fe) has a covale...
established EPG
Covalent bonding of Iron ions (Fe+) to the Argon ion (Ar+) continues until a geometrical Gas-Lattice Structure is formed, as illustrated in Figure 1-8.
established EPG
The forming Argon ion (Ar+) is exposed to Iron ions (Fe+), which have magnetic properties, and both undergo the Electron Extraction Process. The two ions (Ar+/Fe+) form a covalent bond when the covale...
established EPG
Laser activated or laser primed gas ions repel the dislodged electrons being consumed, as illustrated in Figure 1-5.
established EPG
By varying or regulating laser intensity in direct relationship to applied pulse-voltage frequency and voltage amplitude, the inert gas atom of Argon (Ar) is caused to become a positive charged gas io...
established EPG
Laser or light intensity is variable as to duty cycle on/off pulse-frequency from 1 Hz to 65 Hz and above, determined by Le (light intensity in watts), T1 (current on-time), T2 (current off-time), and...
established EPG
Attenuating and adjusting the pulse-voltage-amplitude relative to the pulse-voltage-frequency regulates the Electron Extraction Process governing how electrons are pulled from the gas atom.
established EPG
Once negatively charged electrons are dislodged from the gas atom, the atom becomes destabilized, having missing electrons; this dislodging of electrons via voltage stimulation is termed the Gas Desta...
established EPG
A stationary negative electrical voltage field (E4) simultaneously attracts the positively charged nucleus of the gas atom.
established EPG
A stationary positive electrical voltage-field (E3) attracts the negatively charged electrons away from the gas atom.
established EPG
The gas atom acted upon in the destabilization process is Argon (Ar), which is pulled apart into ion and dislodged electrons via the applied pulse-voltage field.
established EPG
Placing a pulse-voltage potential across the Excitor-Array of the Gas Resonant Cavity, while inhibiting electron flow within the Voltage Intensifier Circuit, causes the argon gas atom to become a posi...
established EPG confidence 0.80
In the VIC resistance relationship, RE is defined as the dielectric constant of Argon (Ar), the dielectric gas used in the Electrical Particle Generator, not the Water Fuel Cell.
established EPG
The Argon (Ar) gas molecule/atom becomes part of the Voltage Intensifier Circuit as a form of resistance between electrical ground and pulse-frequency positive-potential, helping prevent electron flow...
established EPG
The dielectric properties of Argon Gas (dielectric constant 1.000545 @ 23°C) between electrical plates (E3/E4) form the capacitor (ER) of the Gas Resonant Cavity (t).
established EPG
The Magnetic Pulse-Wave produced from the pulsed laser stimulation of the Gas-Lattice traverses pickup windings to generate electricity.
established EPG
The newly structured and formed Gas-Lattice is exposed to Laser Energy, which is pulsed to produce a Magnetic Pulse-Wave.
established EPG
Manufacturing the Magnetized Gas requires taking inert gas atoms and forming a 'Stable' Gas-Lattice by way of voltage stimulation, called 'The Gas Bonding Process.'
established EPG
The Electrical Particle Generator capitalizes on and uses a Magnetized Gas to produce Electrical Energy.